Skip to contentSkip to conversation

Difficulties establishing SCO link for Bluetooth headset on PS3

Bluez-users Christopher Armstrong 1 participant 1 message Feb 29, 2008 Bluetooth drivers

lore
Share & tools
lore
#0 lore raw

Hi

I've been working on this for about four weeks now but to no avail. I'm attempting to get a bluetooth headset to work on Linux. I can pair the device successfully, and connect to it, but when it attempts to establish the SCO link, the bluetooth headset either appears to return an unusual error code or the connection times out.

I am trying to write audio out onto the headset using alsa with the command:

aplay -D plug:bluetooth /usr/share/sounds/ekiga/ring.wav

But I hear nothing on the headset. Recording with the headset seems to fail as well. aplay and arecord return after a few seconds with "I/O error" and a dump of their audio settings.

I am using a Playstation 3 with Debian stable Linux. The kernel I am testing with has been modified for usage on the PS3, and this includes some bluetooth specific patches (the details of which I am not familiar with). I have tried his kernel and also this kernel patched patched with the mh1 patches on the bluez web site for a 2.6.23 kernel
(http://www.bluez.org/patches.html). I had to adapt the patches so they would cleanly apply.

It is specifically the 2.6.23rc6/CELL Linux 20070219 release maintained by Geoff Lavand at Sony (the materials including kernel patches and source are kept at
http://www.kernel.org/pub/linux/kernel/people/geoff/cell/).

I've modified the sco module on both kernels so that BT_DBG outputs everything it tries to do. I've also added some custom debugging lines in sco_connect to get more information about what it is doing.

I am trying to use either one of two Motorola HS801 bluetooth headsets. I have tried Motorola H350s, specifically two different headsets, but I refuse to try anymore since they have fried after trying them with bluez and are now completely broken. (I'm not kidding about this: after trying to connect with them, they refused to work anymore with *ANY* device afterwards, when we were able to demonstrate them working with a Mobile phone or other device beforehand. The button become unresponsive and the light would only come on when you charged them. I have had to return them as they are bricked).

I am using the latest version of bluez-utils and bluez-lib (3.27).

My .asoundrc file reads as:

pcm.bluetooth_hw {
        type bluetooth
        #device  00:0B:2E:13:AC:14
        device  00:0B:2E:13:B2:D6
        profile  auto

}

ctl.bluetooth {
type bluetooth
device btaddrs
}

pcm.bluetooth {
        type plug
        slave {
                pcm "bluetooth_hw"
        }
}

When using the CELL PS3 kernel *without* applying the mh1 patches would give the following output:

hcid (run with -n -d):
-------------------------------------------------------------------
hcid[3037]: Bluetooth HCI daemon
hcid[3037]: Enabling debug information
hcid[3037]: HCI dev 0 registered
hcid[3037]: HCI dev 0 already up
hcid[3037]: Device hci0 has been added
hcid[3037]: Starting security manager 0
hcid[3037]: Device hci0 has been activated
hcid[3037]: Created local server at unix:abstract=/var/run/dbus-F4ewowUUJG,guid= ccf81d2868356574f7314a0047c742aa
hcid[3037]: Registering service object: ident=audio, name=Audio service (/org/bl
uez/service_audio)
hcid[3037]: Registering service object: ident=serial, name=Serial service (/org/
bluez/service_serial)
hcid[3037]: Registering service object: ident=input, name=Input service (/org/bl
uez/service_input)
input[3040]: Bluetooth Input daemon
hcid[3037]:
/opt/bluez-3.27-install/lib/bluetooth/bluetoothd-service-input execu ted with PID 3040
hcid[3037]: Registering service object: ident=network, name=Network service (/or
g/bluez/service_network)
input[3040]: Registered input manager path:/org/bluez/input hcid[3037]: child 3038 exited
hcid[3037]: child 3039 exited
-------------------------------------------------------------------

bluetoothd-service-audio:
-------------------------------------------------------------------
audio[3064]: Bluetooth Audio daemon
audio[3064]: Unix socket created: 5
audio[3064]: audio.conf:
/opt/bluez-3.27-install/etc/bluetooth/audio.conf: key Enable not found audio[3064]: audio.conf:
/opt/bluez-3.27-install/etc/bluetooth/audio.conf: key Disable not found audio[3064]: add_service_record: got record id 0x10000 audio[3064]: audio.conf:
/opt/bluez-3.27-install/etc/bluetooth/audio.conf: key Disable not found audio[3064]: audio.conf:
/opt/bluez-3.27-install/etc/bluetooth/audio.conf: group A2DP not found audio[3064]: audio.conf:
/opt/bluez-3.27-install/etc/bluetooth/audio.conf: group A2DP not found audio[3064]: audio.conf:
/opt/bluez-3.27-install/etc/bluetooth/audio.conf: group A2DP not found audio[3064]: audio.conf:
/opt/bluez-3.27-install/etc/bluetooth/audio.conf: group A2DP not found audio[3064]: SEP 0x10040290 registered: type:0 codec:0 seid:1 audio[3064]: add_service_record: got record id 0x10001 audio[3064]: add_service_record: got record id 0x10002 audio[3064]: add_service_record: got record id 0x10003 audio[3064]: Registered manager path:/org/bluez/audio audio[3064]: Loading device 00:0B:2E:13:AC:14 (headset ) audio[3064]: Got path /org/bluez/hci0 for adapter with address 00:13:A9:E0:EC:B7
audio[3064]: Selecting default device
audio[3064]: Loading device 00:0B:2E:13:B2:D6 (headset ) audio[3064]: Got path /org/bluez/hci0 for adapter with address 00:13:A9:E0:EC:B7
audio[3064]: Accepted new client connection on unix socket (fd=9) audio[3064]: Audio API: received BT_GETCAPABILITIES_REQ audio[3064]: Audio API: sending BT_GETCAPABILITIES_RSP audio[3064]: Audio API: received BT_SETCONFIGURATION_REQ audio[3064]: config sco - device = 00:0B:2E:13:B2:D6 access_mode = 2 audio[3064]: State changed /org/bluez/audio/device1:
HEADSET_STATE_DISCONNECTED -> HEADSET_STATE_CONNECT_IN_PROGRESS audio[3064]: /org/bluez/audio/device1: Connecting to 00:0B:2E:13:B2:D6 channel 1
audio[3064]: /org/bluez/audio/device1: Connected to 00:0B:2E:13:B2:D6 audio[3064]: State changed /org/bluez/audio/device1:
HEADSET_STATE_CONNECT_IN_PROGRESS -> HEADSET_STATE_CONNECTED audio[3064]: State changed /org/bluez/audio/device1:
HEADSET_STATE_CONNECTED -> HEADSET_STATE_PLAY_IN_PROGRESS audio[3064]: Received AT+CCWA=1
audio[3064]: Badly formated or unrecognized command: AT+CCWA=1 audio[3064]: connect(): Function not implemented (38) audio[3064]: config failed
audio[3064]: Audio API: sending BT_SETCONFIGURATION_RSP audio[3064]: State changed /org/bluez/audio/device1:
HEADSET_STATE_PLAY_IN_PROGRESS -> HEADSET_STATE_CONNECTED audio[3064]: Unix client disconnected (fd=9)
audio[3064]: State changed /org/bluez/audio/device1:
HEADSET_STATE_CONNECTED -> HEADSET_STATE_DISCONNECTED
-------------------------------------------------------------------

sdpd (run with -n -d):
sdpd[3054]: Bluetooth SDP daemon
sdpd[3054]: Enabling debug information
sdpd[3054]: Starting SDP server
sdpd[3054]: Adding rec : 0x1001d1f8
sdpd[3054]: with handle : 0x1
sdpd[3054]: Adding rec : 0x1001d2f0
sdpd[3054]: with handle : 0x0
sdpd[3054]: Service classes 0x00
sdpd[3054]: Service register request
sdpd[3054]: Look ahead attr id : 1
sdpd[3054]: Extract PDU, sequenceLength: 75 localExtractedLength: 0 sdpd[3054]: DTD of attrId : 9 Attr id : 0x1
sdpd[3054]: Attr id : 0x1 attrValueLength : 8
sdpd[3054]: Extract PDU, seqLength: 75 localExtractedLength: 11 sdpd[3054]: Extract PDU, sequenceLength: 75 localExtractedLength: 11 sdpd[3054]: DTD of attrId : 9 Attr id : 0x4
sdpd[3054]: Attr id : 0x4 attrValueLength : 14 sdpd[3054]: Extract PDU, seqLength: 75 localExtractedLength: 28 sdpd[3054]: Extract PDU, sequenceLength: 75 localExtractedLength: 28 sdpd[3054]: DTD of attrId : 9 Attr id : 0x5
sdpd[3054]: Attr id : 0x5 attrValueLength : 5
sdpd[3054]: Extract PDU, seqLength: 75 localExtractedLength: 36 sdpd[3054]: Extract PDU, sequenceLength: 75 localExtractedLength: 36 sdpd[3054]: DTD of attrId : 9 Attr id : 0x9
sdpd[3054]: Attr id : 0x9 attrValueLength : 10 sdpd[3054]: Extract PDU, seqLength: 75 localExtractedLength: 49 sdpd[3054]: Extract PDU, sequenceLength: 75 localExtractedLength: 49 sdpd[3054]: DTD of attrId : 9 Attr id : 0x100
sdpd[3054]: Attr id : 0x100 attrValueLength : 23 sdpd[3054]: Extract PDU, seqLength: 75 localExtractedLength: 75 sdpd[3054]: Successful extracting of Svc Rec attributes sdpd[3054]: Couldn't find record for : 0x10000 sdpd[3054]: Adding rec : 0x1001b380
sdpd[3054]: with handle : 0x10000
sdpd[3054]: Service classes 0x00
sdpd[3054]: Sending rsp. status 0
sdpd[3054]: Bytes Sent : 9
sdpd[3054]: Service register request
sdpd[3054]: Look ahead attr id : 1
sdpd[3054]: Extract PDU, sequenceLength: 73 localExtractedLength: 0 sdpd[3054]: DTD of attrId : 9 Attr id : 0x1
sdpd[3054]: Attr id : 0x1 attrValueLength : 5
sdpd[3054]: Extract PDU, seqLength: 73 localExtractedLength: 8 sdpd[3054]: Extract PDU, sequenceLength: 73 localExtractedLength: 8 sdpd[3054]: DTD of attrId : 9 Attr id : 0x4
sdpd[3054]: Attr id : 0x4 attrValueLength : 18 sdpd[3054]: Extract PDU, seqLength: 73 localExtractedLength: 29 sdpd[3054]: Extract PDU, sequenceLength: 73 localExtractedLength: 29 sdpd[3054]: DTD of attrId : 9 Attr id : 0x5
sdpd[3054]: Attr id : 0x5 attrValueLength : 5
sdpd[3054]: Extract PDU, seqLength: 73 localExtractedLength: 37 sdpd[3054]: Extract PDU, sequenceLength: 73 localExtractedLength: 37 sdpd[3054]: DTD of attrId : 9 Attr id : 0x9
sdpd[3054]: Attr id : 0x9 attrValueLength : 10 sdpd[3054]: Extract PDU, seqLength: 73 localExtractedLength: 50 sdpd[3054]: Extract PDU, sequenceLength: 73 localExtractedLength: 50 sdpd[3054]: DTD of attrId : 9 Attr id : 0x100
sdpd[3054]: Attr id : 0x100 attrValueLength : 14 sdpd[3054]: Extract PDU, seqLength: 73 localExtractedLength: 67 sdpd[3054]: Extract PDU, sequenceLength: 73 localExtractedLength: 67 sdpd[3054]: DTD of attrId : 9 Attr id : 0x311
sdpd[3054]: Attr id : 0x311 attrValueLength : 3 sdpd[3054]: Extract PDU, seqLength: 73 localExtractedLength: 73 sdpd[3054]: Successful extracting of Svc Rec attributes sdpd[3054]: Couldn't find record for : 0x10001 sdpd[3054]: Adding rec : 0x1001b218
sdpd[3054]: with handle : 0x10001
sdpd[3054]: Service classes 0x08
sdpd[3054]: Sending rsp. status 0
sdpd[3054]: Bytes Sent : 9
sdpd[3054]: Service register request
sdpd[3054]: Look ahead attr id : 1
sdpd[3054]: Extract PDU, sequenceLength: 69 localExtractedLength: 0 sdpd[3054]: DTD of attrId : 9 Attr id : 0x1
sdpd[3054]: Attr id : 0x1 attrValueLength : 5
sdpd[3054]: Extract PDU, seqLength: 69 localExtractedLength: 8 sdpd[3054]: Extract PDU, sequenceLength: 69 localExtractedLength: 8 sdpd[3054]: DTD of attrId : 9 Attr id : 0x4
sdpd[3054]: Attr id : 0x4 attrValueLength : 18 sdpd[3054]: Extract PDU, seqLength: 69 localExtractedLength: 29 sdpd[3054]: Extract PDU, sequenceLength: 69 localExtractedLength: 29 sdpd[3054]: DTD of attrId : 9 Attr id : 0x5
sdpd[3054]: Attr id : 0x5 attrValueLength : 5
sdpd[3054]: Extract PDU, seqLength: 69 localExtractedLength: 37 sdpd[3054]: Extract PDU, sequenceLength: 69 localExtractedLength: 37 sdpd[3054]: DTD of attrId : 9 Attr id : 0x9
sdpd[3054]: Attr id : 0x9 attrValueLength : 10 sdpd[3054]: Extract PDU, seqLength: 69 localExtractedLength: 50 sdpd[3054]: Extract PDU, sequenceLength: 69 localExtractedLength: 50 sdpd[3054]: DTD of attrId : 9 Attr id : 0x100
sdpd[3054]: Attr id : 0x100 attrValueLength : 10 sdpd[3054]: Extract PDU, seqLength: 69 localExtractedLength: 63 sdpd[3054]: Extract PDU, sequenceLength: 69 localExtractedLength: 63 sdpd[3054]: DTD of attrId : 9 Attr id : 0x311
sdpd[3054]: Attr id : 0x311 attrValueLength : 3 sdpd[3054]: Extract PDU, seqLength: 69 localExtractedLength: 69 sdpd[3054]: Successful extracting of Svc Rec attributes sdpd[3054]: Couldn't find record for : 0x10002 sdpd[3054]: Adding rec : 0x1001b898
sdpd[3054]: with handle : 0x10002
sdpd[3054]: Service classes 0x08
sdpd[3054]: Sending rsp. status 0
sdpd[3054]: Bytes Sent : 9
sdpd[3054]: Service register request
sdpd[3054]: Look ahead attr id : 1
sdpd[3054]: Extract PDU, sequenceLength: 69 localExtractedLength: 0 sdpd[3054]: DTD of attrId : 9 Attr id : 0x1
sdpd[3054]: Attr id : 0x1 attrValueLength : 5
sdpd[3054]: Extract PDU, seqLength: 69 localExtractedLength: 8 sdpd[3054]: Extract PDU, sequenceLength: 69 localExtractedLength: 8 sdpd[3054]: DTD of attrId : 9 Attr id : 0x4
sdpd[3054]: Attr id : 0x4 attrValueLength : 18 sdpd[3054]: Extract PDU, seqLength: 69 localExtractedLength: 29 sdpd[3054]: Extract PDU, sequenceLength: 69 localExtractedLength: 29 sdpd[3054]: DTD of attrId : 9 Attr id : 0x5
sdpd[3054]: Attr id : 0x5 attrValueLength : 5
sdpd[3054]: Extract PDU, seqLength: 69 localExtractedLength: 37 sdpd[3054]: Extract PDU, sequenceLength: 69 localExtractedLength: 37 sdpd[3054]: DTD of attrId : 9 Attr id : 0x9
sdpd[3054]: Attr id : 0x9 attrValueLength : 10 sdpd[3054]: Extract PDU, seqLength: 69 localExtractedLength: 50 sdpd[3054]: Extract PDU, sequenceLength: 69 localExtractedLength: 50 sdpd[3054]: DTD of attrId : 9 Attr id : 0x100
sdpd[3054]: Attr id : 0x100 attrValueLength : 10 sdpd[3054]: Extract PDU, seqLength: 69 localExtractedLength: 63 sdpd[3054]: Extract PDU, sequenceLength: 69 localExtractedLength: 63 sdpd[3054]: DTD of attrId : 9 Attr id : 0x311
sdpd[3054]: Attr id : 0x311 attrValueLength : 3 sdpd[3054]: Extract PDU, seqLength: 69 localExtractedLength: 69 sdpd[3054]: Successful extracting of Svc Rec attributes sdpd[3054]: Couldn't find record for : 0x10003 sdpd[3054]: Adding rec : 0x1001bdc8
sdpd[3054]: with handle : 0x10003
sdpd[3054]: Service classes 0x08
sdpd[3054]: Sending rsp. status 0
sdpd[3054]: Bytes Sent : 9

dmesg (with extended SCO module output):

VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 224k freed
sr 0:0:0:0: Attached scsi generic sg0 type 5 ps3_system_bus_match:354: dev=5(vuart_02), drv=5(ps3_sys_manager): match
-> ps3_system_bus_probe:365: vuart_02
<- ps3_system_bus_probe:376: vuart_02
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Initializing USB Mass Storage driver...
scsi1 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning USB Mass Storage support registered.
input: Sony Computer Entertainment Inc. SCE USB MOUSE as /class/input/input0
input: USB HID v1.00 Mouse [Sony Computer Entertainment Inc. SCE USB MOUSE] on usb-sb_05-2.2
input: Sony Computer Entertainment Inc. SCE USB Keyboard as /class/input/input1
input: USB HID v1.00 Keyboard [Sony Computer Entertainment Inc. SCE USB Keyboard] on usb-sb_05-2.1.1
usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Bluetooth: HCI USB driver ver 2.9
usbcore: registered new interface driver hci_usb
Adding 586332k swap on /dev/ps3da5. Priority:-1 extents:1 across:586332k
EXT3 FS on ps3da1, internal journal
scsi 1:0:0:0: Direct-Access Sony GL819 MS 1.08 PQ: 0
ANSI: 0 CCS
scsi 1:0:0:0: Attached scsi generic sg1 type 0
scsi 1:0:0:1: Direct-Access Sony GL819 SD 1.08 PQ: 0
ANSI: 0
scsi 1:0:0:1: Attached scsi generic sg2 type 0
scsi 1:0:0:2: Direct-Access Sony GL819 CF 1.08 PQ: 0
ANSI: 0
scsi 1:0:0:2: Attached scsi generic sg3 type 0
usb-storage: device scan complete
sd 1:0:0:0: [sda] Attached SCSI removable disk
sd 1:0:0:1: [sdb] Attached SCSI removable disk
sd 1:0:0:2: [sdc] Attached SCSI removable disk
eth0: no IPv6 routers present
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
eth0: no IPv6 routers present
usb 1-2.4: new full speed USB device using ps3-ehci-driver and address 6 usb 1-2.4: configuration #1 chosen from 1 choice
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: SCO (Voice Link) ver 0.5
Bluetooth: SCO socket layer initialized
sco_sock_create: sock c000000005011580
sco_sock_init: sk c0006c0064376000
sco_sock_bind: sk c0006c0064376000 00:00:00:00:00:00
sco_sock_connect: sk c0006c0064376000
sco_connect: 00:00:00:00:00:00 -> D6:B2:13:2E:0B:00
sco_conn_add: hcon c0006c0066bc7000 conn c0006c00641f1200 __sco_chan_add: conn c0006c00641f1200
sco_connect: B7:EC:E0:A9:13:00 -> D6:B2:13:2E:0B:00 BT_CONNECT
sco_sock_set_timer: sock c0006c0064376000 state 5 timeout 10000
sco_connect_cfm: hcon c0006c0066bc7000 bdaddr D6:B2:13:2E:0B:00 status 31
sco_conn_del: hcon c0006c0066bc7000 conn c0006c00641f1200, err 38
sco_sock_clear_timer: sock c0006c0064376000 state 5
sco_chan_del: sk c0006c0064376000, conn c0006c00641f1200, err 38
sco_sock_release: sock c000000005011580, sk c0006c0064376000
sco_sock_clear_timer: sock c0006c0064376000 state 9
sco_sock_close: sk c0006c0064376000 state 9 conn 0000000000000000 socket c000000005011580
sco_sock_kill: sk c0006c0064376000 state 9
sco_sock_destruct: sk c0006c0064376000

The above output (from bluetoothd-service-audio and dmesg) in particular appears to show sco_connect() failing with bluetooth error code 31 which I believe means something like "Unspecified Device Error". This is with the unpatched kernel (i.e. without the mh1 patches on the bluez web site).

After applying and fixing up the mh1 patches for this kernel, I am now getting connection timeout errors. The output from hcid, bluetoothd-service-audio and dmesg are shown below:

hcid:
-----

hcid[1940]: Bluetooth HCI daemon
hcid[1940]: Enabling debug information
hcid[1940]: HCI dev 0 registered
hcid[1940]: HCI dev 0 already up
hcid[1940]: Device hci0 has been added
hcid[1940]: Starting security manager 0
hcid[1940]: Device hci0 has been activated
hcid[1940]: Created local server at unix:abstract=/var/run/dbus-1Fq9YBFxBi,guid=a577c9bc8d5b1272d4ef120047c753ff hcid[1940]: Registering service object: ident=audio, name=Audio service (/org/bluez/service_audio)
hcid[1940]: Registering service object: ident=serial, name=Serial service (/org/bluez/service_serial)
hcid[1940]: Registering service object: ident=input, name=Input service (/org/bluez/service_input)
hcid[1940]:
/opt/bluez-3.27-install/lib/bluetooth/bluetoothd-service-input executed with PID 1943
hcid[1940]: Registering service object: ident=network, name=Network service (/org/bluez/service_network)
input[1943]: Bluetooth Input daemon
hcid[1940]: child 1941 exited
hcid[1940]: child 1942 exited
input[1943]: Registered input manager path:/org/bluez/input hcid[1940]: Child PID 1943 got the unique bus name :1.2 hcid[1940]: name_listener_add(:1.2)
hcid[1940]: /org/bluez: org.bluez.Database.AddServiceRecord() hcid[1940]: name_listener_add(:1.3)
hcid[1940]: /org/bluez: org.bluez.Database.AddServiceRecord() hcid[1940]: /org/bluez: org.bluez.Database.AddServiceRecord() hcid[1940]: /org/bluez: org.bluez.Database.AddServiceRecord() hcid[1940]: /org/bluez: org.bluez.Manager.FindAdapter() hcid[1940]: /org/bluez/hci0: org.bluez.Adapter.GetRemoteName() hcid[1940]: /org/bluez: org.bluez.Manager.FindAdapter() hcid[1940]: /org/bluez/hci0: org.bluez.Adapter.GetRemoteName() hcid[1940]: /org/bluez/hci0: org.bluez.Adapter.GetRemoteServiceHandles() hcid[1940]: no matching session found. creating a new one hcid[1940]: link_key_request (sba=00:13:A9:E0:EC:B7, dba=00:0B:2E:13:B2:D6)
hcid[1940]: sdp session added to cache
hcid[1940]: /org/bluez/hci0: org.bluez.Adapter.GetRemoteServiceRecord() hcid[1940]: found matching session, removing from list hcid[1940]: sdp session added to cache
hcid[1940]: /org/bluez/hci0:
org.bluez.Adapter.FinishRemoteServiceTransaction()
hcid[1940]: found matching session, removing from list

bluetoothd-service-audio:
-------------------------
audio[1975]: Bluetooth Audio daemon
audio[1975]: Unix socket created: 5
audio[1975]: audio.conf:
/opt/bluez-3.27-install/etc/bluetooth/audio.conf: key Enable not found audio[1975]: audio.conf:
/opt/bluez-3.27-install/etc/bluetooth/audio.conf: key Disable not found audio[1975]: add_service_record: got record id 0x10000 audio[1975]: audio.conf:
/opt/bluez-3.27-install/etc/bluetooth/audio.conf: key Disable not found audio[1975]: audio.conf:
/opt/bluez-3.27-install/etc/bluetooth/audio.conf: group A2DP not found audio[1975]: audio.conf:
/opt/bluez-3.27-install/etc/bluetooth/audio.conf: group A2DP not found audio[1975]: audio.conf:
/opt/bluez-3.27-install/etc/bluetooth/audio.conf: group A2DP not found audio[1975]: audio.conf:
/opt/bluez-3.27-install/etc/bluetooth/audio.conf: group A2DP not found audio[1975]: SEP 0x10040290 registered: type:0 codec:0 seid:1 audio[1975]: add_service_record: got record id 0x10001 audio[1975]: add_service_record: got record id 0x10002 audio[1975]: add_service_record: got record id 0x10003 audio[1975]: Registered manager path:/org/bluez/audio audio[1975]: Loading device 00:0B:2E:13:AC:14 (headset ) audio[1975]: Got path /org/bluez/hci0 for adapter with address 00:13:A9:E0:EC:B7
audio[1975]: Selecting default device
audio[1975]: Loading device 00:0B:2E:13:B2:D6 (headset ) audio[1975]: Got path /org/bluez/hci0 for adapter with address 00:13:A9:E0:EC:B7
audio[1975]: Accepted new client connection on unix socket (fd=9) audio[1975]: Audio API: received BT_GETCAPABILITIES_REQ audio[1975]: Audio API: sending BT_GETCAPABILITIES_RSP audio[1975]: Audio API: received BT_SETCONFIGURATION_REQ audio[1975]: config sco - device = 00:0B:2E:13:B2:D6 access_mode = 2 audio[1975]: State changed /org/bluez/audio/device1:
HEADSET_STATE_DISCONNECTED -> HEADSET_STATE_CONNECT_IN_PROGRESS audio[1975]: /org/bluez/audio/device1: Connecting to 00:0B:2E:13:B2:D6 channel 1
audio[1975]: /org/bluez/audio/device1: Connected to 00:0B:2E:13:B2:D6 audio[1975]: State changed /org/bluez/audio/device1:
HEADSET_STATE_CONNECT_IN_PROGRESS -> HEADSET_STATE_CONNECTED audio[1975]: State changed /org/bluez/audio/device1:
HEADSET_STATE_CONNECTED -> HEADSET_STATE_PLAY_IN_PROGRESS audio[1975]: Received AT+CCWA=1
audio[1975]: Badly formated or unrecognized command: AT+CCWA=1 audio[1975]: connect(): Connection timed out (110) audio[1975]: config failed
audio[1975]: Audio API: sending BT_SETCONFIGURATION_RSP audio[1975]: State changed /org/bluez/audio/device1:
HEADSET_STATE_PLAY_IN_PROGRESS -> HEADSET_STATE_CONNECTED audio[1975]: Unix client disconnected (fd=9)

dmesg:

Bluetooth: L2CAP ver 2.9
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: SCO (Voice Link) ver 0.5
Bluetooth: SCO socket layer initialized
sco_sock_create: sock c0006c0062526580
sco_sock_init: sk c0006c0066b8a800
sco_sock_bind: sk c0006c0066b8a800 00:00:00:00:00:00
sco_sock_connect: sk c0006c0066b8a800
sco_connect: 00:00:00:00:00:00 -> D6:B2:13:2E:0B:00
sco_conn_add: hcon c0006c0066b8a000 conn c000000007935300 __sco_chan_add: conn c000000007935300
sco_sock_set_timer: sock c0006c0066b8a800 state 5 timeout 10000
sco_sock_timeout: sock c0006c0066b8a800 state 5
sco_sock_release: sock c0006c0062526580, sk c0006c0066b8a800
sco_sock_clear_timer: sock c0006c0066b8a800 state 5
sco_sock_close: sk c0006c0066b8a800 state 5 conn c000000007935300 socket c0006c0062526580
sco_chan_del: sk c0006c0066b8a800, conn c000000007935300, err 104
sco_sock_kill: sk c0006c0066b8a800 state 9
sco_sock_destruct: sk c0006c0066b8a800
----------------------------------------

And this I presume may be helpful:

Quoted 1 line

hciconfig hci0 version

hci0: Type: USB

        BD Address: 00:13:A9:E0:EC:B7 ACL MTU: 384:8 SCO MTU: 64:8
        HCI Ver: 2.0 (0x3) HCI Rev: 0xe18 LMP Ver: 2.0 (0x3) LMP Subver:
        0xe18
        Manufacturer: Cambridge Silicon Radio (10)

* note that the Bluetooth device on the PS3 is integrated into the device unit.

Quoted 1 line

hciconfig hci0 features

hci0: Type: USB
BD Address: 00:13:A9:E0:EC:B7 ACL MTU: 384:8 SCO MTU: 64:8
Features: 0xff 0xff 0x8f 0xfe 0x9b 0xf9 0x00 0x80
<3-slot packets> <5-slot packets> <encryption> <slot offset>
<timing accuracy> <role switch> <hold mode> <sniff mode> <park state> <RSSI> <channel quality> <SCO link> <HV2 packets>
<HV3 packets> <u-law log> <A-law log> <CVSD> <paging scheme>
<power control> <transparent SCO> <broadcast encrypt> <EDR ACL 2 Mbps> <EDR ACL 3 Mbps> <enhanced iscan> <interlaced iscan> <interlaced pscan> <inquiry with RSSI>
<extended SCO> <EV4 packets> <EV5 packets> <AFH cap. slave>
<AFH class. slave> <3-slot EDR ACL> <5-slot EDR ACL> <AFH cap. master> <AFH class. master> <EDR eSCO 2 Mbps> <EDR eSCO 3 Mbps> <3-slot EDR eSCO> <extended features>
--------------------------------------------------------------------------

I have also tried reloadng hci_usb with the force_scofix=1 option as suggested by a previous message on this list from a person experiencing sco timeout issues. Is there anyone else who has had success either getting this model of headset to work with Linux, or got headsets to work on the PS3? I don't mind changing to another headset, but I would really like to get this to work with a PS3 without the risk of frying more headsets.

Does anyone have any suggestions as to things I can try? I am happy to write code, modify kernel modules, etc. if necessary.

Thanks

Christopher Armstrong

Signature · 12 lines
  Christopher Armstrong
  carmstrong ^^AT^ fastmail dOT com /Dot/ au


-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users