rtc: switch to unlocked_ioctl
Make the lock/unlock_kernel explicit.
--- arch/arm/common/rtctime.c | 7 ++++--- 1 files changed, 4 insertions(+), 3 deletions(-)
arch/arm/common/rtctime.c +4 -3
@@ -173,8 +173,7 @@ static unsigned int rtc_poll(struct file *file, poll_table *wait)return data !=0 ?POLLIN |POLLRDNORM :0 ; } -static int rtc_ioctl (struct inode *inode,struct file *file,unsigned int cmd, -unsigned long arg) +static int rtc_ioctl (struct file *file,unsigned int cmd,unsigned long arg) {struct rtc_ops *ops = file->private_data;struct rtc_time tm;
@@ -182,6 +181,7 @@ static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,void __user *uarg = (void __user *)arg;int ret = -EINVAL ; +lock_kernel ();switch (cmd) {case RTC_ALM_READ : ret =rtc_arm_read_alarm (ops, &alrm);
@@ -276,6 +276,7 @@ static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd, ret = ops->ioctl (cmd, arg);break ; } +unlock_kernel ();return ret; }
@@ -333,7 +334,7 @@ static const struct file_operations rtc_fops = { .llseek = no_llseek, .read = rtc_read, .poll = rtc_poll, - .ioctl = rtc_ioctl, + .unlocked_ioctl = rtc_ioctl, .open = rtc_open, .release = rtc_release, .fasync = rtc_fasync,
Signature · 1 line
1.5.4.3.500.g83a2c
Harvey Harrison napsal(a):
Quoted 12 lines
Make the lock/unlock_kernel explicit.
Signed-off-by Harvey Harrison <[email protected]>--- arch/arm/common/rtctime.c | 7 ++++--- 1 files changed, 4 insertions(+), 3 deletions(-)arch/arm/common/rtctime.c +0
-0
arch/arm/common/rtctime.c static unsigned int rtc_poll(struct file *file, poll_table *wait) · line 176
Quoted 6 lines
arch/arm/common/rtctime.c +1
-2@@ -173,8 +173,7 @@ static unsigned int rtc_poll(struct file *file, poll_table *wait)return data !=0 ?POLLIN |POLLRDNORM :0 ; } -static int rtc_ioctl (struct inode *inode,struct file *file,unsigned int cmd, -unsigned long arg) +static int rtc_ioctl (struct file *file,unsigned int cmd,unsigned long arg)
long? I guess you need to get a cross-compiler...
Quoted 16 lines · On Tuesday 04 March 2008 23:58:01 Jiri Slaby wrote:
Harvey Harrison napsal(a):
Quoted 15 lines
Make the lock/unlock_kernel explicit.
Signed-off-by Harvey Harrison <[email protected]>--- arch/arm/common/rtctime.c | 7 ++++--- 1 files changed, 4 insertions(+), 3 deletions(-)arch/arm/common/rtctime.c +0
-0@@ -173,8 +173,7 @@ static unsigned int rtc_poll(struct file *file, poll_table *wait)return data !=0 ?POLLIN |POLLRDNORM :0 ; }
Quoted 5 lines
arch/arm/common/rtctime.c static unsigned int rtc_poll(struct file *file, poll_table *wait) · line 176
Quoted 3 lines
arch/arm/common/rtctime.c +1
-2-static int rtc_ioctl (struct inode *inode,struct file *file,unsigned int cmd, -unsigned long arg) +static int rtc_ioctl (struct file *file,unsigned int cmd,unsigned long arg)long? I guess you need to get a cross-compiler...
Yes please do these transformations only for code that you can compile.
One easy way to do that is to do an allyesconfig build once and save the log (or fetch http://halobates.de/allyes/i386-2.6.24-rc6-git12 and
http://halobates.de/allyes/x86_64-2.6.24-rc6-git12 as an older example) and always check if the file you're changing is compiled in the log.
Then after changing do at least a make allyesconfig ; make path/to/file.o
-Andi
Quoted 2 lines · Andi Kleen
One easy way to do that is to do an allyesconfig build once and save the log
Don't bother. As I keep saying and have been saying since the all*config targets were introduced, they're useless for ARM, because ARM is soo diverse.
You need to find a platform configuration which uses the file.
Eg,
$ grep rtctime arch/arm/common/Makefile obj-y += rtctime.o
In this case, any one will do.
But lets say you modify arch/arm/common/uengine.c:
$ grep uengine arch/arm/common/Makefile obj-$(CONFIG_ARCH_IXP2000) += uengine.o obj-$(CONFIG_ARCH_IXP23XX) += uengine.o $ grep CONFIG_ARCH_IXP2000= arch/arm/configs/* arch/arm/configs/ixp2000_defconfig:CONFIG_ARCH_IXP2000=y $ grep CONFIG_ARCH_IXP23XX= arch/arm/configs/* arch/arm/configs/ixp23xx_defconfig:CONFIG_ARCH_IXP23XX=y
So now you know you need to use ixp2000_defconfig or ixp23xx_defconfig as a basis for building uengine.c. (which is reasonable because it's an IXP2000 or IXP2300 specific support file.)
Signature · 3 lines
Russell King Linux kernel 2.6 ARM Linux - http://www.arm.linux.org.uk/ maintainer of:
Quoted 7 lines · Russell King
Quoted 2 lines · Andi Kleen
One easy way to do that is to do an allyesconfig build once and save the log
Don't bother. As I keep saying and have been saying since the all*config targets were introduced, they're useless for ARM, because ARM is soo diverse.
It's more a white list for x86. Yes it would mean there will be no such patches for ARM.
-Andi