[Fwd: Re: Dell OptiPlex 320 - Core 2 Duo]
I now notice this hasn't been CC'ed to the list. Apologies to all.
-NT
------ Mensagem Reencaminhada ------
Quoted 62 lines
Assunto: Re: Dell OptiPlex 320 - Core 2 Duo
Data: Wed, 05 Mar 2008 22:49:18 +0000Lennart, those options came from the SuSE installer, I guess. It wasn't me installing the machine, and I have no idea why the guy doing it whould add so many. I also found it strange, but since it's a Failsafe, and SuSE is not my favourite dist, I just left it alone. My first tests were done removing several of those (those that, to my knowledge, didn't make sense, like: acpi=off, apm=off, mce=off, maxcpus=0, probably pci=..).
Actually, the default boots to the not-failsafe:
kernel
/boot/vmlinuz-2.6.22.5-23-defaultroot=/dev/disk/by-id/scsi-SATA_WDC_WD800JD-75M_WD-WMAM9TA95509-part2 apm=off acpi=off mce=off barrier=off ide=nodma idewait=50 i8042.nomux
psmouse.proto=bare irqpoll pci=nommconf resume=/dev/sda1 splash=silent
showoptsBoth share lots of options, anyway. I wonder what "irqpoll" does, though (it's probably related with "Misrouted IRQ fixup and polling support enabled" dmesg)... I just lack the opportunity to test all the combinations (the machine is remote)..
Even if the model is not the same as described, Optiplex has a nice (not!) history of problems:
http://www.suseforums.net/index.php?showtopic=34172
http://suseroot.com/blog/blog.php?postid=74
I forgot to mention that this last time I tried the combinations:
* acpi=on + pci=nomsi
* acpi=on + pci=routeirq-NT
Qua, 2008-03-05 às 16:39 -0500, Lennart Sorensen escreveu:
[...]Quoted 3 lines
Quoted 3 lines
kernel
/boot/vmlinuz-2.6.22.5-23-defaultroot=/dev/disk/by-id/scsi-SATA_WDC_WD800JD-75M_WD-WMAM9TA95509-part2 showopts ide=nodma apm=off noresume noapic pci=route edd=off 3[errata: it's pci=routeirq, obviously]
Quoted 16 lines
Quoted 2 lines
It didn't help. The boot stops at the line PCI: xxxxxx something. I'll try to try the BIOS update issue. I'll report back later.
Well most of the options seem like a bad idea in general.
ide=nodma, noapic and maxcpus I just can't imagine why would be listed there. Usually you add an option if it solves a problem, you don't add all of the possible options. Multi processor requires some of those features, and disabling dma on ide makes no sense unless you are using a very broken ide drive.
Who added all those options and why?
--
Len Sorensen
Signature · 3 lines
Nuno Tavares DRI, Consultoria Informática Telef: +351 936 184 086