saa7134: fixed pointer in tuner callback

linux-dvb Christoph Honermann 5 participants 14 messages Mar 27, 2008 – May 13, 2008 1 message not in the archive Media (V4L/DVB)

lore

Share & tools

lore

Christoph Honermann

author

2008-03-27 21:16 UTC #0 lore raw

Hi, Hartmund

I have tested the following archives with my MD8800 und the DVB-S Card.

v4l-dvb-912856e2a0ce.tar.bz2 --> The DVB-S Input 1 works. The module of the following archives are loaded with the option "use_frontend=1,1" at the Shell or automatically:
/etc/modprobe.d/saa7134-dvb with the following line
"options saa7134-dvb use_frontend=1,1"
v4l-dvb-1e295a94038e.tar.bz2;

FATAL: Error inserting saa7134_dvb (/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/saa7134/saa7134-dvb.ko): Unknown symbol in module, or unknown parameter (see dmesg)

saa7134_dvb: disagrees about version of symbol saa7134_ts_register
saa7134_dvb: Unknown symbol saa7134_ts_register
saa7134_dvb: Unknown symbol videobuf_queue_sg_init
saa7134_dvb: disagrees about version of symbol saa7134_set_gpio
saa7134_dvb: Unknown symbol saa7134_set_gpio
saa7134_dvb: disagrees about version of symbol saa7134_i2c_call_client
saa7134_dvb: Unknown symbol saa7134_i2c_call_clients
saa7134_dvb: disagrees about version of symbol saa7134_ts_unregister
saa7134_dvb: Unknown symbol saa7134_ts_unregister

v4l-dvb-f98d28c21389.tar.bz2 and v4l-dvb-a06ac2bdeb3c.tar.bz2 -->

FATAL: Error inserting saa7134_dvb (/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/saa7134/saa7134-dvb.ko): Unknown symbol in module, or unknown parameter (see dmesg)

dmesg | grep saa7134
saa7134_dvb: Unknown symbol saa7134_tuner_callback
saa7134_dvb: disagrees about version of symbol saa7134_ts_register
saa7134_dvb: Unknown symbol saa7134_ts_register
saa7134_dvb: Unknown symbol videobuf_queue_sg_init
saa7134_dvb: disagrees about version of symbol saa7134_set_gpio
saa7134_dvb: Unknown symbol saa7134_set_gpio

The Hardware ist working with Windows XP with both Input channels.

best regards
Christoph

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Hartmut Hackmann

2008-03-27 21:49 UTC #1 lore raw

Hi, Christoph

Quoted 40 lines · Christoph Honermann

Hi, Hartmund
I have tested the following archives with my MD8800 und the DVB-S Card.
v4l-dvb-912856e2a0ce.tar.bz2 --> The DVB-S Input 1 works. The module of the following archives are loaded with the option "use_frontend=1,1" at the Shell or automatically:
/etc/modprobe.d/saa7134-dvb with the following line
"options saa7134-dvb use_frontend=1,1"
v4l-dvb-1e295a94038e.tar.bz2;
FATAL: Error inserting saa7134_dvb (/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/saa7134/saa7134-dvb.ko):
Unknown symbol in module, or unknown parameter (see dmesg)
saa7134_dvb: disagrees about version of symbol saa7134_ts_register
saa7134_dvb: Unknown symbol saa7134_ts_register
saa7134_dvb: Unknown symbol videobuf_queue_sg_init
saa7134_dvb: disagrees about version of symbol saa7134_set_gpio
saa7134_dvb: Unknown symbol saa7134_set_gpio
saa7134_dvb: disagrees about version of symbol saa7134_i2c_call_client
saa7134_dvb: Unknown symbol saa7134_i2c_call_clients
saa7134_dvb: disagrees about version of symbol saa7134_ts_unregister
saa7134_dvb: Unknown symbol saa7134_ts_unregister
v4l-dvb-f98d28c21389.tar.bz2 and v4l-dvb-a06ac2bdeb3c.tar.bz2 -->
FATAL: Error inserting saa7134_dvb (/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/saa7134/saa7134-dvb.ko):
Unknown symbol in module, or unknown parameter (see dmesg)
dmesg | grep saa7134
saa7134_dvb: Unknown symbol saa7134_tuner_callback
saa7134_dvb: disagrees about version of symbol saa7134_ts_register
saa7134_dvb: Unknown symbol saa7134_ts_register
saa7134_dvb: Unknown symbol videobuf_queue_sg_init
saa7134_dvb: disagrees about version of symbol saa7134_set_gpio
saa7134_dvb: Unknown symbol saa7134_set_gpio

Quoted 2 lines

The Hardware ist working with Windows XP with both Input channels.

This occurs when you mix modules of different driver versions. You need to replace all modules of the v4l-dvb subsystem.
So after you compiled and installed with
make; make install
you need to unload all modules of the subsystem either with
make rmmod
or reboot.
Afterwards, you can unload and reload a single module as you tried to do.

Hartmut

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Christoph Honermann

author

2008-04-07 19:08 UTC #2 lore raw

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Hartmut Hackmann

2008-04-07 20:43 UTC #3 lore raw

HI,

Quoted 75 lines · Christoph Honermann

Hi, Hartmund
Quoted 56 lines · Hartmut Hackmann
Hi, Christoph
Quoted 40 lines · Christoph Honermann
Hi, Hartmund
I have tested the following archives with my MD8800 und the DVB-S Card.
v4l-dvb-912856e2a0ce.tar.bz2 --> The DVB-S Input 1 works. The module of the following archives are loaded with the option "use_frontend=1,1" at the Shell or automatically:
/etc/modprobe.d/saa7134-dvb with the following line
"options saa7134-dvb use_frontend=1,1"
v4l-dvb-1e295a94038e.tar.bz2;
FATAL: Error inserting saa7134_dvb (/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/saa7134/saa7134-dvb.ko):
Unknown symbol in module, or unknown parameter (see dmesg)
saa7134_dvb: disagrees about version of symbol saa7134_ts_register
saa7134_dvb: Unknown symbol saa7134_ts_register
saa7134_dvb: Unknown symbol videobuf_queue_sg_init
saa7134_dvb: disagrees about version of symbol saa7134_set_gpio
saa7134_dvb: Unknown symbol saa7134_set_gpio
saa7134_dvb: disagrees about version of symbol saa7134_i2c_call_client
saa7134_dvb: Unknown symbol saa7134_i2c_call_clients
saa7134_dvb: disagrees about version of symbol saa7134_ts_unregister
saa7134_dvb: Unknown symbol saa7134_ts_unregister
v4l-dvb-f98d28c21389.tar.bz2 and v4l-dvb-a06ac2bdeb3c.tar.bz2 -->
FATAL: Error inserting saa7134_dvb (/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/saa7134/saa7134-dvb.ko):
Unknown symbol in module, or unknown parameter (see dmesg)
dmesg | grep saa7134
saa7134_dvb: Unknown symbol saa7134_tuner_callback
saa7134_dvb: disagrees about version of symbol saa7134_ts_register
saa7134_dvb: Unknown symbol saa7134_ts_register
saa7134_dvb: Unknown symbol videobuf_queue_sg_init
saa7134_dvb: disagrees about version of symbol saa7134_set_gpio
saa7134_dvb: Unknown symbol saa7134_set_gpio
Quoted 3 lines
The Hardware ist working with Windows XP with both Input channels.
This occurs when you mix modules of different driver versions. You need to replace all modules of the v4l-dvb subsystem.
So after you compiled and installed with
make; make install
you need to unload all modules of the subsystem either with
make rmmod
or reboot.
Afterwards, you can unload and reload a single module as you tried to do.
Quoted 3 lines
Hartmut
the second DVB-S Channel is working.
But there is one thing that makes Problems.
I have the effect that the devices /dev/dvb/adapter0/dvr0 and /dev/dvb/adapter1/dvr0 are missed from kaffeine. Therefore it wont work (no TV-picture, no sound, no channel scanning).
If i look with Nautilus (file manager) therefore the whole Section /dev/dvb is switching off.
Can that be an effect of the module?
The Problem is sometimes not there but i don't find the reason (changing the Modules, reboots, ..). If I solve the Problem, should I test the kombination between DVB-S and DVB-T?

Quoted 4 lines

Best regards
Christoph

The device files in /dev/dvb are created by the dvb subsystem after successful initialization. So if module loading fails as you describe above, you won't have the devices.
Your problem still is the mismatching module versions.
Could it be that you have the saa7134.ko module twice in the /lib/modules tree? You need to use the new versions of the modules. *Don't* try to mix them.

Best Regards
Hartmut

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Christoph Honermann

author

2008-04-08 20:52 UTC #4 lore raw

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Hartmut Hackmann

2008-04-08 23:17 UTC #5 lore raw

Hi, Christoph

This is very confusing..

Quoted 143 lines · Christoph Honermann

Hi Hartmut�
Quoted 101 lines · Hartmut Hackmann
HI,
Quoted 84 lines · Christoph Honermann
Hi, Hartmund
Quoted 65 lines · Hartmut Hackmann
Hi, Christoph
Quoted 47 lines · Christoph Honermann
Hi, Hartmund
I have tested the following archives with my MD8800 und the DVB-S Card.
v4l-dvb-912856e2a0ce.tar.bz2 --> The DVB-S Input 1 works. The module of the following archives are loaded with the option "use_frontend=1,1" at the Shell or automatically:
/etc/modprobe.d/saa7134-dvb with the following line
"options saa7134-dvb use_frontend=1,1"
v4l-dvb-1e295a94038e.tar.bz2;
FATAL: Error inserting saa7134_dvb
(/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/saa7134/saa7134-dvb.ko):
Unknown symbol in module, or unknown parameter (see dmesg)
saa7134_dvb: disagrees about version of symbol saa7134_ts_register
saa7134_dvb: Unknown symbol saa7134_ts_register
saa7134_dvb: Unknown symbol videobuf_queue_sg_init
saa7134_dvb: disagrees about version of symbol saa7134_set_gpio
saa7134_dvb: Unknown symbol saa7134_set_gpio
saa7134_dvb: disagrees about version of symbol
saa7134_i2c_call_client
saa7134_dvb: Unknown symbol saa7134_i2c_call_clients
saa7134_dvb: disagrees about version of symbol
saa7134_ts_unregister
saa7134_dvb: Unknown symbol saa7134_ts_unregister
v4l-dvb-f98d28c21389.tar.bz2 and v4l-dvb-a06ac2bdeb3c.tar.bz2 -->
FATAL: Error inserting saa7134_dvb
(/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/saa7134/saa7134-dvb.ko):
Unknown symbol in module, or unknown parameter (see dmesg)
dmesg | grep saa7134
saa7134_dvb: Unknown symbol saa7134_tuner_callback
saa7134_dvb: disagrees about version of symbol saa7134_ts_register
saa7134_dvb: Unknown symbol saa7134_ts_register
saa7134_dvb: Unknown symbol videobuf_queue_sg_init
saa7134_dvb: disagrees about version of symbol saa7134_set_gpio
saa7134_dvb: Unknown symbol saa7134_set_gpio
Quoted 3 lines
The Hardware ist working with Windows XP with both Input channels.
This occurs when you mix modules of different driver versions. You need to
replace all modules of the v4l-dvb subsystem.
So after you compiled and installed with
make; make install
you need to unload all modules of the subsystem either with
make rmmod
or reboot.
Afterwards, you can unload and reload a single module as you tried to do.
Quoted 3 lines
Hartmut
the second DVB-S Channel is working.
But there is one thing that makes Problems.
I have the effect that the devices /dev/dvb/adapter0/dvr0 and /dev/dvb/adapter1/dvr0 are missed from kaffeine. Therefore it wont work (no TV-picture, no sound, no channel scanning).
If i look with Nautilus (file manager) therefore the whole Section /dev/dvb is switching off.
Can that be an effect of the module?
The Problem is sometimes not there but i don't find the reason (changing the Modules, reboots, ..). If I solve the Problem, should I test the kombination between DVB-S and DVB-T?
Quoted 4 lines
Best regards
Christoph
The device files in /dev/dvb are created by the dvb subsystem after successful
initialization. So if module loading fails as you describe above, you won't have
the devices.
Your problem still is the mismatching module versions.
Could it be that you have the saa7134.ko module twice in the /lib/modules tree?
You need to use the new versions of the modules. *Don't* try to mix them.
Quoted 2 lines
Best Regards
Hartmut
I have checkt the devices. If I unload the Module they are not avible. The modules are once in the tree and the devices are switching on and off bye
looking with the File Manager. I can send you an probe of the messages from the Programm kaffeine with an interesting follow of reaction:
@kaffeine
kbuildsycoca running...
0
/dev/dvb/adapter0/frontend0 : opened ( Philips TDA10086 DVB-S ) /dev/dvb/0/frontend1 : : No such file or directory Loaded epg data : 9904 events (141 msecs)
kio (KIOConnection): ERROR: Could not write data
eltern@ubuntu:~$ Tuning to: arte / autocount: 0
DvbCam::probe(): /dev/dvb/adapter0/ca0: : No such file or directory
Using DVB device 0:0 "Philips TDA10086 DVB-S"
tuning DVB-S to 10743000 h 22000000
inv:2 fecH:5
DiSEqC: switch pos 0, 18V, loband (index 1)
DiSEqC: e0 10 38 f2 00 00
...............
Not able to lock to the signal on the given frequency Frontend closed
Tuning delay: 3637 ms
Tuning to: 3sat / autocount: 0
Using DVB device 0:0 "Philips TDA10086 DVB-S" tuning DVB-S to 11953000 h 27500000
inv:2 fecH:3
DiSEqC: switch pos 0, 18V, hiband (index 3)
DiSEqC: e0 10 38 f3 00 00
. LOCKED.
*DVR DEVICE: : No such device*
Frontend closed
Tuning delay: 976 ms
eltern@ubuntu:~$

Quoted 12 lines

It is the original text from the console.
You can see that the DVB DEVICE is at once missing.
I have no idea why that happens. And that seem to be the cause of the Problem.
To be sure for the new module i have once more build them (v4l-dvb-a06ac2bdeb3c.tar.bz2).
- make all
- make rmmod
- make install
- rmmod saa7134-dvb
- modprobe saa7134-dvb use_frontend=1,1

As i mentioned in a mail before, make rmmod does not necessarily do the trick, sorry for causing the confusion.
but looks like the symbol version problem is gone or did you do something else?

Quoted 23 lines

For your information in addition a copy from dmesg:

[  720.868119] DVB: registering new adapter (saa7133[1])
[  720.868129] DVB: registering frontend 0 (Philips TDA10086 DVB-S)...
[  731.320958] saa7133[0]/dvb: frontend initialization failed
[  731.368002] DVB: registering new adapter (saa7133[1])
[  731.368149] DVB: registering frontend 0 (Philips TDA10086 DVB-S)...
[  741.833698] saa7133[0]/dvb: frontend initialization failed
[  741.886609] DVB: registering new adapter (saa7133[1])
[  741.886766] DVB: registering frontend 0 (Philips TDA10086 DVB-S)...
[  752.433333] DVB: registering new adapter (saa7133[0])
[  752.433343] DVB: registering frontend 0 (Philips TDA10086 DVB-S)...
[  752.521148] DVB: registering new adapter (saa7133[1])
[  752.521158] DVB: registering frontend 1 (Philips TDA10086 DVB-S)...
[  762.946368] saa7133[0]/dvb: frontend initialization failed
[  762.983815] saa7133[1]/dvb: dvb_init: Medion Quadro, no tda826x found !
[  762.984121] DVB: registering new adapter (saa7133[1])
[  762.984306] DVB: registering frontend 0 (Philips TDA10086 DVB-S)...
[  773.392403] saa7133[0]/dvb: frontend initialization failed
[  773.422954] DVB: registering new adapter (saa7133[1])
[  773.423163] DVB: registering frontend 0 (Philips TDA10086 DVB-S)...
[  783.857495] saa7133[0]/dvb: frontend initialization failed

Quoted 2 lines

and so on ....

Hm, do these messages occur in a sequence? Which messages and actions are in between? The driver should once register one adapter and one frontend for each saa7133. at driver load.
Do you try to load and unload the driver again and again? Do you leave it few seconds to settle before you try to access it?

Hartmut

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

sioux

2008-04-07 21:09 UTC #6 lore raw

In reply to Christoph Honermann

Hi all!

here similar problem with 7134_alsa module:

saa7134_alsa: disagrees about version of symbol snd_ctl_add
saa7134_alsa: Unknown symbol snd_ctl_add
saa7134_alsa: disagrees about version of symbol snd_pcm_new
saa7134_alsa: Unknown symbol snd_pcm_new
saa7134_alsa: disagrees about version of symbol snd_card_register
saa7134_alsa: Unknown symbol snd_card_register
saa7134_alsa: disagrees about version of symbol snd_card_free
saa7134_alsa: Unknown symbol snd_card_free
saa7134_alsa: disagrees about version of symbol snd_pcm_stop
saa7134_alsa: Unknown symbol snd_pcm_stop
saa7134_alsa: disagrees about version of symbol snd_ctl_new1
saa7134_alsa: Unknown symbol snd_ctl_new1
saa7134_alsa: disagrees about version of symbol snd_card_new
saa7134_alsa: Unknown symbol snd_card_new
saa7134_alsa: disagrees about version of symbol snd_pcm_lib_ioctl
saa7134_alsa: Unknown symbol snd_pcm_lib_ioctl
saa7134_alsa: disagrees about version of symbol snd_pcm_set_ops
saa7134_alsa: Unknown symbol snd_pcm_set_ops
saa7134_alsa: disagrees about version of symbol snd_pcm_hw_constraint_integer
saa7134_alsa: Unknown symbol snd_pcm_hw_constraint_integer
saa7134_alsa: disagrees about version of symbol snd_pcm_period_elapsed
saa7134_alsa: Unknown symbol snd_pcm_period_elapsed
saa7134_alsa: disagrees about version of symbol snd_pcm_hw_constraint_step
saa7134_alsa: Unknown symbol snd_pcm_hw_constraint_step

This is my alsa version:
cat /proc/asound/version
advanced Linux Sound Architecture Driver Version 1.0.15 (Tue Oct 16 14:57:44 2007 UTC)

This is my kernel version:
uname -a
Linux sioux-desktop 2.6.22-14-rt #1 SMP PREEMPT RT Tue Feb 12 09:57:10 UTC 2008 i686 GNU/Linux

This is my saa7134 version and card:

saa7130/34: v4l2 driver version 0.2.14 loaded
saa7133[0]: found at 0000:02:09.0, rev: 209, irq: 19, latency: 32, mmio: 0xed000000 saa7133[0]: subsystem: 1822:0022, board: Twinhan Hybrid DTV-DVB 3056 PCI [card=131,autodetected] saa7133[0]: board init: gpio is 40000
tuner' 0-0042: chip found @ 0x84 (saa7133[0])

Make rmmod do not solve the problem!

_______________________________________________________________

Christoph Honermann ha scritto:

Quoted 73 lines

Hi, Hartmund
Quoted 56 lines · Hartmut Hackmann
Hi, Christoph
Quoted 40 lines · Christoph Honermann
Hi, Hartmund
I have tested the following archives with my MD8800 und the DVB-S Card.
v4l-dvb-912856e2a0ce.tar.bz2 --> The DVB-S Input 1 works. The module of the following archives are loaded with the option "use_frontend=1,1" at the Shell or automatically:
/etc/modprobe.d/saa7134-dvb with the following line
"options saa7134-dvb use_frontend=1,1"
v4l-dvb-1e295a94038e.tar.bz2;
FATAL: Error inserting saa7134_dvb (/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/saa7134/saa7134-dvb.ko):
Unknown symbol in module, or unknown parameter (see dmesg)
saa7134_dvb: disagrees about version of symbol saa7134_ts_register
saa7134_dvb: Unknown symbol saa7134_ts_register
saa7134_dvb: Unknown symbol videobuf_queue_sg_init
saa7134_dvb: disagrees about version of symbol saa7134_set_gpio
saa7134_dvb: Unknown symbol saa7134_set_gpio
saa7134_dvb: disagrees about version of symbol saa7134_i2c_call_client
saa7134_dvb: Unknown symbol saa7134_i2c_call_clients
saa7134_dvb: disagrees about version of symbol saa7134_ts_unregister
saa7134_dvb: Unknown symbol saa7134_ts_unregister
v4l-dvb-f98d28c21389.tar.bz2 and v4l-dvb-a06ac2bdeb3c.tar.bz2 -->
FATAL: Error inserting saa7134_dvb (/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/saa7134/saa7134-dvb.ko):
Unknown symbol in module, or unknown parameter (see dmesg)
dmesg | grep saa7134
saa7134_dvb: Unknown symbol saa7134_tuner_callback
saa7134_dvb: disagrees about version of symbol saa7134_ts_register
saa7134_dvb: Unknown symbol saa7134_ts_register
saa7134_dvb: Unknown symbol videobuf_queue_sg_init
saa7134_dvb: disagrees about version of symbol saa7134_set_gpio
saa7134_dvb: Unknown symbol saa7134_set_gpio
Quoted 3 lines
The Hardware ist working with Windows XP with both Input channels.
This occurs when you mix modules of different driver versions. You need to replace all modules of the v4l-dvb subsystem.
So after you compiled and installed with
make; make install
you need to unload all modules of the subsystem either with
make rmmod
or reboot.
Afterwards, you can unload and reload a single module as you tried to do.
Quoted 3 lines
Hartmut
the second DVB-S Channel is working.
But there is one thing that makes Problems.
I have the effect that the devices /dev/dvb/adapter0/dvr0 and /dev/dvb/adapter1/dvr0 are missed from kaffeine. Therefore it wont work (no TV-picture, no sound, no channel scanning). If i look with Nautilus (file manager) therefore the whole Section /dev/dvb is switching off.
Can that be an effect of the module?
The Problem is sometimes not there but i don't find the reason (changing the Modules, reboots, ..). If I solve the Problem, should I test the kombination between DVB-S and DVB-T?
Best regards
Christoph

Quoted 6 lines

------------------------------------------------------------------------
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Hartmut Hackmann

2008-04-08 20:15 UTC #7 lore raw

Hi,

Quoted 51 lines · sioux

Hi all!
here similar problem with 7134_alsa module:
saa7134_alsa: disagrees about version of symbol snd_ctl_add
saa7134_alsa: Unknown symbol snd_ctl_add
saa7134_alsa: disagrees about version of symbol snd_pcm_new
saa7134_alsa: Unknown symbol snd_pcm_new
saa7134_alsa: disagrees about version of symbol snd_card_register
saa7134_alsa: Unknown symbol snd_card_register
saa7134_alsa: disagrees about version of symbol snd_card_free
saa7134_alsa: Unknown symbol snd_card_free
saa7134_alsa: disagrees about version of symbol snd_pcm_stop
saa7134_alsa: Unknown symbol snd_pcm_stop
saa7134_alsa: disagrees about version of symbol snd_ctl_new1
saa7134_alsa: Unknown symbol snd_ctl_new1
saa7134_alsa: disagrees about version of symbol snd_card_new
saa7134_alsa: Unknown symbol snd_card_new
saa7134_alsa: disagrees about version of symbol snd_pcm_lib_ioctl
saa7134_alsa: Unknown symbol snd_pcm_lib_ioctl
saa7134_alsa: disagrees about version of symbol snd_pcm_set_ops
saa7134_alsa: Unknown symbol snd_pcm_set_ops
saa7134_alsa: disagrees about version of symbol snd_pcm_hw_constraint_integer
saa7134_alsa: Unknown symbol snd_pcm_hw_constraint_integer
saa7134_alsa: disagrees about version of symbol snd_pcm_period_elapsed
saa7134_alsa: Unknown symbol snd_pcm_period_elapsed
saa7134_alsa: disagrees about version of symbol snd_pcm_hw_constraint_step
saa7134_alsa: Unknown symbol snd_pcm_hw_constraint_step
This is my alsa version:
cat /proc/asound/version
advanced Linux Sound Architecture Driver Version 1.0.15 (Tue Oct 16 14:57:44 2007 UTC)
This is my kernel version:
uname -a
Linux sioux-desktop 2.6.22-14-rt #1 SMP PREEMPT RT Tue Feb 12 09:57:10 UTC 2008 i686 GNU/Linux
This is my saa7134 version and card:
saa7130/34: v4l2 driver version 0.2.14 loaded
saa7133[0]: found at 0000:02:09.0, rev: 209, irq: 19, latency: 32, mmio:
0xed000000
saa7133[0]: subsystem: 1822:0022, board: Twinhan Hybrid DTV-DVB 3056 PCI [card=131,autodetected]
saa7133[0]: board init: gpio is 40000
tuner' 0-0042: chip found @ 0x84 (saa7133[0])

Quoted 2 lines

Make rmmod do not solve the problem!

<snip> _______________________________________________________________

A "make rmmod" does *not* always work: If a device is in use, the kernel will refuse to remove the module. You should find an appropriate error message. You can have i.e. this situation:
If you load the modules a boot time and you run kde, the mixer desktop applet will open the mixer of the saa7134-alsa device.
So you will not be able to unload and thus update the driver before you closed the kmix applet.
There are many other possibilities.

Hartmut

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

sioux

2008-04-09 19:44 UTC #8 lore raw

Hartmut Hackmann ha scritto:

Quoted 72 lines

Hi,
Quoted 52 lines · sioux
Hi all!
here similar problem with 7134_alsa module:
saa7134_alsa: disagrees about version of symbol snd_ctl_add
saa7134_alsa: Unknown symbol snd_ctl_add
saa7134_alsa: disagrees about version of symbol snd_pcm_new
saa7134_alsa: Unknown symbol snd_pcm_new
saa7134_alsa: disagrees about version of symbol snd_card_register
saa7134_alsa: Unknown symbol snd_card_register
saa7134_alsa: disagrees about version of symbol snd_card_free
saa7134_alsa: Unknown symbol snd_card_free
saa7134_alsa: disagrees about version of symbol snd_pcm_stop
saa7134_alsa: Unknown symbol snd_pcm_stop
saa7134_alsa: disagrees about version of symbol snd_ctl_new1
saa7134_alsa: Unknown symbol snd_ctl_new1
saa7134_alsa: disagrees about version of symbol snd_card_new
saa7134_alsa: Unknown symbol snd_card_new
saa7134_alsa: disagrees about version of symbol snd_pcm_lib_ioctl
saa7134_alsa: Unknown symbol snd_pcm_lib_ioctl
saa7134_alsa: disagrees about version of symbol snd_pcm_set_ops
saa7134_alsa: Unknown symbol snd_pcm_set_ops
saa7134_alsa: disagrees about version of symbol snd_pcm_hw_constraint_integer
saa7134_alsa: Unknown symbol snd_pcm_hw_constraint_integer
saa7134_alsa: disagrees about version of symbol snd_pcm_period_elapsed
saa7134_alsa: Unknown symbol snd_pcm_period_elapsed
saa7134_alsa: disagrees about version of symbol snd_pcm_hw_constraint_step
saa7134_alsa: Unknown symbol snd_pcm_hw_constraint_step
This is my alsa version:
cat /proc/asound/version
advanced Linux Sound Architecture Driver Version 1.0.15 (Tue Oct 16 14:57:44 2007 UTC)
This is my kernel version:
uname -a
Linux sioux-desktop 2.6.22-14-rt #1 SMP PREEMPT RT Tue Feb 12 09:57:10 UTC 2008 i686 GNU/Linux
This is my saa7134 version and card:
saa7130/34: v4l2 driver version 0.2.14 loaded
saa7133[0]: found at 0000:02:09.0, rev: 209, irq: 19, latency: 32,
mmio: 0xed000000
saa7133[0]: subsystem: 1822:0022, board: Twinhan Hybrid DTV-DVB 3056 PCI [card=131,autodetected]
saa7133[0]: board init: gpio is 40000
tuner' 0-0042: chip found @ 0x84 (saa7133[0])
Quoted 2 lines
Make rmmod do not solve the problem!
<snip> _______________________________________________________________
A "make rmmod" does *not* always work: If a device is in use, the kernel will
refuse to remove the module. You should find an appropriate error message.
You can have i.e. this situation:
If you load the modules a boot time and you run kde, the mixer desktop applet
will open the mixer of the saa7134-alsa device.
So you will not be able to unload and thus update the driver before you closed
the kmix applet.
There are many other possibilities.

Quoted 2 lines

Hartmut

sudo killall mixer_applet2
sudo rmmod saa7134 saa7134_alsa saa7134_dvb

and than sudo make rmmod

does not solve the problem!

sioux

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Hartmut Hackmann

2008-04-09 20:30 UTC #9 lore raw

Hi,

Quoted 77 lines · sioux

Hartmut Hackmann ha scritto:
Quoted 72 lines
Hi,
Quoted 52 lines · sioux
Hi all!
here similar problem with 7134_alsa module:
saa7134_alsa: disagrees about version of symbol snd_ctl_add
saa7134_alsa: Unknown symbol snd_ctl_add
saa7134_alsa: disagrees about version of symbol snd_pcm_new
saa7134_alsa: Unknown symbol snd_pcm_new
saa7134_alsa: disagrees about version of symbol snd_card_register
saa7134_alsa: Unknown symbol snd_card_register
saa7134_alsa: disagrees about version of symbol snd_card_free
saa7134_alsa: Unknown symbol snd_card_free
saa7134_alsa: disagrees about version of symbol snd_pcm_stop
saa7134_alsa: Unknown symbol snd_pcm_stop
saa7134_alsa: disagrees about version of symbol snd_ctl_new1
saa7134_alsa: Unknown symbol snd_ctl_new1
saa7134_alsa: disagrees about version of symbol snd_card_new
saa7134_alsa: Unknown symbol snd_card_new
saa7134_alsa: disagrees about version of symbol snd_pcm_lib_ioctl
saa7134_alsa: Unknown symbol snd_pcm_lib_ioctl
saa7134_alsa: disagrees about version of symbol snd_pcm_set_ops
saa7134_alsa: Unknown symbol snd_pcm_set_ops
saa7134_alsa: disagrees about version of symbol snd_pcm_hw_constraint_integer
saa7134_alsa: Unknown symbol snd_pcm_hw_constraint_integer
saa7134_alsa: disagrees about version of symbol snd_pcm_period_elapsed
saa7134_alsa: Unknown symbol snd_pcm_period_elapsed
saa7134_alsa: disagrees about version of symbol snd_pcm_hw_constraint_step
saa7134_alsa: Unknown symbol snd_pcm_hw_constraint_step
This is my alsa version:
cat /proc/asound/version
advanced Linux Sound Architecture Driver Version 1.0.15 (Tue Oct 16 14:57:44 2007 UTC)
This is my kernel version:
uname -a
Linux sioux-desktop 2.6.22-14-rt #1 SMP PREEMPT RT Tue Feb 12 09:57:10 UTC 2008 i686 GNU/Linux
This is my saa7134 version and card:
saa7130/34: v4l2 driver version 0.2.14 loaded
saa7133[0]: found at 0000:02:09.0, rev: 209, irq: 19, latency: 32,
mmio: 0xed000000
saa7133[0]: subsystem: 1822:0022, board: Twinhan Hybrid DTV-DVB 3056 PCI [card=131,autodetected]
saa7133[0]: board init: gpio is 40000
tuner' 0-0042: chip found @ 0x84 (saa7133[0])
Quoted 2 lines
Make rmmod do not solve the problem!
<snip> _______________________________________________________________
A "make rmmod" does *not* always work: If a device is in use, the kernel will
refuse to remove the module. You should find an appropriate error message.
You can have i.e. this situation:
If you load the modules a boot time and you run kde, the mixer desktop applet
will open the mixer of the saa7134-alsa device.
So you will not be able to unload and thus update the driver before you closed
the kmix applet.
There are many other possibilities.
Quoted 2 lines
Hartmut

Quoted 11 lines

sudo killall mixer_applet2
sudo rmmod saa7134 saa7134_alsa saa7134_dvb
and than sudo make rmmod
does not solve the problem!
sioux

Does anybody else have an idea what the reason might be? The handling of kernel symbol versions is tricky, i have no idea what sioux might have done wrong.
But the patch in question does not even touch the sound code...

Hartmut

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

hermann pitton

2008-04-09 21:16 UTC #10 lore raw

Hi,

Am Mittwoch, den 09.04.2008, 22:30 +0200 schrieb Hartmut Hackmann:

Quoted 91 lines

Hi,
Quoted 77 lines · sioux
Hartmut Hackmann ha scritto:
Quoted 72 lines
Hi,
Quoted 52 lines · sioux
Hi all!
here similar problem with 7134_alsa module:
saa7134_alsa: disagrees about version of symbol snd_ctl_add
saa7134_alsa: Unknown symbol snd_ctl_add
saa7134_alsa: disagrees about version of symbol snd_pcm_new
saa7134_alsa: Unknown symbol snd_pcm_new
saa7134_alsa: disagrees about version of symbol snd_card_register
saa7134_alsa: Unknown symbol snd_card_register
saa7134_alsa: disagrees about version of symbol snd_card_free
saa7134_alsa: Unknown symbol snd_card_free
saa7134_alsa: disagrees about version of symbol snd_pcm_stop
saa7134_alsa: Unknown symbol snd_pcm_stop
saa7134_alsa: disagrees about version of symbol snd_ctl_new1
saa7134_alsa: Unknown symbol snd_ctl_new1
saa7134_alsa: disagrees about version of symbol snd_card_new
saa7134_alsa: Unknown symbol snd_card_new
saa7134_alsa: disagrees about version of symbol snd_pcm_lib_ioctl
saa7134_alsa: Unknown symbol snd_pcm_lib_ioctl
saa7134_alsa: disagrees about version of symbol snd_pcm_set_ops
saa7134_alsa: Unknown symbol snd_pcm_set_ops
saa7134_alsa: disagrees about version of symbol snd_pcm_hw_constraint_integer
saa7134_alsa: Unknown symbol snd_pcm_hw_constraint_integer
saa7134_alsa: disagrees about version of symbol snd_pcm_period_elapsed
saa7134_alsa: Unknown symbol snd_pcm_period_elapsed
saa7134_alsa: disagrees about version of symbol snd_pcm_hw_constraint_step
saa7134_alsa: Unknown symbol snd_pcm_hw_constraint_step
This is my alsa version:
cat /proc/asound/version
advanced Linux Sound Architecture Driver Version 1.0.15 (Tue Oct 16 14:57:44 2007 UTC)
This is my kernel version:
uname -a
Linux sioux-desktop 2.6.22-14-rt #1 SMP PREEMPT RT Tue Feb 12 09:57:10 UTC 2008 i686 GNU/Linux
This is my saa7134 version and card:
saa7130/34: v4l2 driver version 0.2.14 loaded
saa7133[0]: found at 0000:02:09.0, rev: 209, irq: 19, latency: 32,
mmio: 0xed000000
saa7133[0]: subsystem: 1822:0022, board: Twinhan Hybrid DTV-DVB 3056 PCI [card=131,autodetected]
saa7133[0]: board init: gpio is 40000
tuner' 0-0042: chip found @ 0x84 (saa7133[0])
Quoted 2 lines
Make rmmod do not solve the problem!
<snip> _______________________________________________________________
A "make rmmod" does *not* always work: If a device is in use, the kernel will
refuse to remove the module. You should find an appropriate error message.
You can have i.e. this situation:
If you load the modules a boot time and you run kde, the mixer desktop applet
will open the mixer of the saa7134-alsa device.
So you will not be able to unload and thus update the driver before you closed
the kmix applet.
There are many other possibilities.
Quoted 2 lines
Hartmut
Quoted 11 lines
sudo killall mixer_applet2
sudo rmmod saa7134 saa7134_alsa saa7134_dvb
and than sudo make rmmod
does not solve the problem!
sioux

Quoted 7 lines

Does anybody else have an idea what the reason might be? The handling of kernel symbol versions is tricky, i have no idea what sioux might have done wrong.
But the patch in question does not even touch the sound code...
Hartmut

the trouble seems to be within Sioux's alsa configuration.

OSS mixer and OSS PCM emulation should be enabled and of a version in sync with the other alsa modules, which seems to be broken here.

Cheers,
Hermann

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Mauro Carvalho Chehab

2008-04-09 21:49 UTC #11 lore raw

In reply to Hartmut Hackmann

Quoted 5 lines

Does anybody else have an idea what the reason might be? The handling of kernel symbol versions is tricky, i have no idea what sioux might have done wrong.
But the patch in question does not even touch the sound code...

There are some distros that have .gz modules. Those aren't overridden by make install.

The better procedure to generate a clean driver is to do:
make distclean
make rminstall
make rmmod
make
make install

If make rminstall still doesn't remove the old modules, you can always do:
rm -rf /lib/modules/uname -r/kernel/drivers/media

And then, reinstall again, with make install.

Cheers,
Mauro

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

A message that is not in the archive (sent off-list or not yet received): [email protected]

Mauro Carvalho Chehab

2008-04-12 16:48 UTC #13 lore raw

Quoted 3 lines · On Sat, 12 Apr 2008 16:48:08 +0200 sioux <[email protected]> wrote:

Still not working.

sioux@sioux-desktop:/usr/src/v4l-dvb$ sudo make clean

Try "make distclean".

This will remove some cached information that might be wrong, due to a dependency change.

Quoted 1 line

make[2]: Entering directory `/usr/src/linux-headers-2.6.22-14-rt'

Hmm... you're using a -rt patched kernel? I'm not sure if the realtime patches are compatible with V4L/DVB. Maybe, you'll need to compile against one mainstream version.

Cheers,
Mauro

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Christoph Honermann

author

2008-05-13 20:26 UTC #14 lore raw

In reply to Hartmut Hackmann

Hi together

Quoted 91 lines · Hartmut Hackmann

Hi,
Quoted 77 lines · sioux
Hartmut Hackmann ha scritto:
Quoted 72 lines
Hi,
Quoted 52 lines · sioux
Hi all!
here similar problem with 7134_alsa module:
saa7134_alsa: disagrees about version of symbol snd_ctl_add
saa7134_alsa: Unknown symbol snd_ctl_add
saa7134_alsa: disagrees about version of symbol snd_pcm_new
saa7134_alsa: Unknown symbol snd_pcm_new
saa7134_alsa: disagrees about version of symbol snd_card_register
saa7134_alsa: Unknown symbol snd_card_register
saa7134_alsa: disagrees about version of symbol snd_card_free
saa7134_alsa: Unknown symbol snd_card_free
saa7134_alsa: disagrees about version of symbol snd_pcm_stop
saa7134_alsa: Unknown symbol snd_pcm_stop
saa7134_alsa: disagrees about version of symbol snd_ctl_new1
saa7134_alsa: Unknown symbol snd_ctl_new1
saa7134_alsa: disagrees about version of symbol snd_card_new
saa7134_alsa: Unknown symbol snd_card_new
saa7134_alsa: disagrees about version of symbol snd_pcm_lib_ioctl
saa7134_alsa: Unknown symbol snd_pcm_lib_ioctl
saa7134_alsa: disagrees about version of symbol snd_pcm_set_ops
saa7134_alsa: Unknown symbol snd_pcm_set_ops
saa7134_alsa: disagrees about version of symbol snd_pcm_hw_constraint_integer
saa7134_alsa: Unknown symbol snd_pcm_hw_constraint_integer
saa7134_alsa: disagrees about version of symbol snd_pcm_period_elapsed
saa7134_alsa: Unknown symbol snd_pcm_period_elapsed
saa7134_alsa: disagrees about version of symbol snd_pcm_hw_constraint_step
saa7134_alsa: Unknown symbol snd_pcm_hw_constraint_step
This is my alsa version:
cat /proc/asound/version
advanced Linux Sound Architecture Driver Version 1.0.15 (Tue Oct 16 14:57:44 2007 UTC)
This is my kernel version:
uname -a
Linux sioux-desktop 2.6.22-14-rt #1 SMP PREEMPT RT Tue Feb 12 09:57:10 UTC 2008 i686 GNU/Linux
This is my saa7134 version and card:
saa7130/34: v4l2 driver version 0.2.14 loaded saa7133[0]: found at 0000:02:09.0, rev: 209, irq: 19, latency: 32,
mmio: 0xed000000
saa7133[0]: subsystem: 1822:0022, board: Twinhan Hybrid DTV-DVB 3056 PCI [card=131,autodetected]
saa7133[0]: board init: gpio is 40000
tuner' 0-0042: chip found @ 0x84 (saa7133[0])
Quoted 2 lines
Make rmmod do not solve the problem!
<snip> _______________________________________________________________
A "make rmmod" does *not* always work: If a device is in use, the kernel will
refuse to remove the module. You should find an appropriate error message.
You can have i.e. this situation:
If you load the modules a boot time and you run kde, the mixer desktop applet
will open the mixer of the saa7134-alsa device.
So you will not be able to unload and thus update the driver before you closed
the kmix applet.
There are many other possibilities.
Quoted 2 lines
Hartmut
Quoted 11 lines
sudo killall mixer_applet2
sudo rmmod saa7134 saa7134_alsa saa7134_dvb
and than sudo make rmmod
does not solve the problem!
sioux

Quoted 7 lines

Does anybody else have an idea what the reason might be? The handling of kernel symbol versions is tricky, i have no idea what sioux might have done wrong.
But the patch in question does not even touch the sound code...
Hartmut

I have fix the Problem with my System.
The TV-Card is working with both DVB-S tuner.
It works with the Kernels 2.6.22-14 and 2.6.24-12 but not with 2.6.24-16 My Problem with the old Version was a wrong configuration with a vdr program.
The Kernel 2.26.24-16 has a Problem with the wrong Version of some Modules.

I can now look TV with my MD8800 and with the DVB-S Tuner (both Tuners).

Best regards

Christoph

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb