Skip to contentSkip to conversation

Please pull git390 'for-linus' branch

PATCH Martin Schwidefsky 1 participant 1 message May 7, 2008

Subsystems (6)
lore
Share & tools
lore
#0 lore raw

Please pull from 'for-linus' branch of

	git://git390.osdl.marist.edu/pub/scm/linux-2.6.git for-linus

to receive the following updates:

 Documentation/s390/CommonIO       |   11 --
 arch/s390/Kconfig                 |    7 +
 arch/s390/kernel/compat_wrapper.S |    2 +-
 arch/s390/kernel/entry.S          |   29 ++--
 arch/s390/kernel/entry64.S        |   57 +++++--
 arch/s390/kernel/ptrace.c         |  100 +-----------
 arch/s390/kvm/Kconfig             |    1 -
 arch/s390/kvm/intercept.c         |    3 +
 arch/s390/kvm/kvm-s390.c          |    5 +-
 arch/s390/mm/Makefile             |    1 +
 arch/s390/mm/init.c               |    3 +
 arch/s390/mm/page-states.c        |   79 +++++++++
 drivers/s390/char/tty3270.c       |   15 +-
 drivers/s390/cio/blacklist.c      |  323 +++++++++++++++++++------------------
 drivers/s390/cio/cio.c            |   39 ++----
 drivers/s390/cio/cio.h            |    2 -
 drivers/s390/cio/cio_debug.h      |    6 -
 drivers/s390/cio/css.c            |    4 +-
 drivers/s390/cio/device.c         |   25 ++--
 drivers/s390/cio/device_fsm.c     |   44 +++---
 drivers/s390/cio/device_id.c      |    4 +-
 drivers/s390/cio/device_pgid.c    |   12 +-
 drivers/s390/s390mach.c           |    3 +-
 include/asm-s390/kvm_host.h       |    1 +
 include/asm-s390/page.h           |   11 ++
 include/asm-s390/ptrace.h         |    2 +
 include/asm-s390/system.h         |    6 +
 27 files changed, 408 insertions(+), 387 deletions(-)
 create mode 100644 arch/s390/mm/page-states.c

Christian Borntraeger (1):
[S390] s390-kvm: leave sie context on work. Removes preemption requirement

Heiko Carstens (1):
[S390] tty3270: fix put_char fail/success conversion.

Martin Schwidefsky (3):
[S390] s390: Optimize user and work TIF check [S390] s390mach compile warning [S390] guest page hinting light

Michael Ernst (2):
[S390] cio: Remove cio_msg kernel parameter. [S390] cio: Fix parsing mechanism for blacklisted devices.

Roland McGrath (1):
[S390] compat ptrace cleanup

Documentation/s390/CommonIO +0 -11
index 8fbc0a8..bf0baa1 100644
@@ -8,17 +8,6 @@ Command line parameters
 
   Enable logging of debug information in case of ccw device timeouts.
 
-
-* cio_msg = yes | no
-  
-  Determines whether information on found devices and sensed device 
-  characteristics should be shown during startup or when new devices are
-  found, i. e. messages of the types "Detected device 0.0.4711 on subchannel
-  0.0.0042" and "SenseID: Device 0.0.4711 reports: ...".
-
-  Default is off.
-
-
 * cio_ignore = {all} |
 	       {<device> | <range of devices>} |
 	       {!<device> | !<range of devices>}
arch/s390/Kconfig +7 -0
index 29a7940..1d03508 100644
@@ -430,6 +430,13 @@ config CMM_IUCV
 	  Select this option to enable the special message interface to
 	  the cooperative memory management.
 
+config PAGE_STATES
+	bool "Unused page notification"
+	help
+	  This enables the notification of unused pages to the
+	  hypervisor. The ESSA instruction is used to do the states
+	  changes between a page that has content and the unused state.
+
 config VIRT_TIMER
 	bool "Virtual CPU timer support"
 	help
arch/s390/kernel/compat_wrapper.S +1 -1
index 743d54f..d003a6e 100644
@@ -121,7 +121,7 @@ sys32_ptrace_wrapper:
 	lgfr	%r3,%r3			# long
 	llgtr	%r4,%r4			# long
 	llgfr	%r5,%r5			# long
-	jg	sys_ptrace		# branch to system call
+	jg	compat_sys_ptrace	# branch to system call
 
 	.globl	sys32_alarm_wrapper
 sys32_alarm_wrapper:
arch/s390/kernel/entry.S +14 -15
index bdbb3bc..708cf9c 100644
@@ -279,8 +279,6 @@ sysc_do_restart:
 	st	%r2,SP_R2(%r15)   # store return value (change R2 on stack)
 
 sysc_return:
-	tm	SP_PSW+1(%r15),0x01	# returning to user ?
-	bno	BASED(sysc_restore)
 	tm	__TI_flags+3(%r9),_TIF_WORK_SVC
 	bnz	BASED(sysc_work)  # there is work to do (signals etc.)
 sysc_restore:
@@ -312,6 +310,8 @@ sysc_work_loop:
 # One of the work bits is on. Find out which one.
 #
 sysc_work:
+	tm	SP_PSW+1(%r15),0x01	# returning to user ?
+	bno	BASED(sysc_restore)
 	tm	__TI_flags+3(%r9),_TIF_MCCK_PENDING
 	bo	BASED(sysc_mcck_pending)
 	tm	__TI_flags+3(%r9),_TIF_NEED_RESCHED
@@ -602,12 +602,6 @@ io_no_vtime:
 	la	%r2,SP_PTREGS(%r15)	# address of register-save area
 	basr	%r14,%r1		# branch to standard irq handler
 io_return:
-	tm	SP_PSW+1(%r15),0x01	# returning to user ?
-#ifdef CONFIG_PREEMPT
-	bno	BASED(io_preempt)	# no -> check for preemptive scheduling
-#else
-	bno	BASED(io_restore)	# no-> skip resched & signal
-#endif
 	tm	__TI_flags+3(%r9),_TIF_WORK_INT
 	bnz	BASED(io_work)		# there is work to do (signals etc.)
 io_restore:
@@ -629,10 +623,18 @@ io_restore_trace_psw:
 	.long	0, io_restore_trace + 0x80000000
 #endif
 
-#ifdef CONFIG_PREEMPT
-io_preempt:
+#
+# switch to kernel stack, then check the TIF bits
+#
+io_work:
+	tm	SP_PSW+1(%r15),0x01	# returning to user ?
+#ifndef CONFIG_PREEMPT
+	bno	BASED(io_restore)	# no-> skip resched & signal
+#else
+	bnz	BASED(io_work_user)	# no -> check for preemptive scheduling
+	# check for preemptive scheduling
 	icm	%r0,15,__TI_precount(%r9)
-	bnz	BASED(io_restore)
+	bnz	BASED(io_restore)	# preemption disabled
 	l	%r1,SP_R15(%r15)
 	s	%r1,BASED(.Lc_spsize)
 	mvc	SP_PTREGS(__PT_SIZE,%r1),SP_PTREGS(%r15)
@@ -646,10 +648,7 @@ io_resume_loop:
 	br	%r1			# call schedule
 #endif
 
-#
-# switch to kernel stack, then check the TIF bits
-#
-io_work:
+io_work_user:
 	l	%r1,__LC_KERNEL_STACK
 	s	%r1,BASED(.Lc_spsize)
 	mvc	SP_PTREGS(__PT_SIZE,%r1),SP_PTREGS(%r15)
arch/s390/kernel/entry64.S +42 -15

94 lines not on this page · raw message

arch/s390/kernel/ptrace.c +6 -94

131 lines not on this page · raw message

arch/s390/kvm/Kconfig +0 -1
index 1761b74..e051cad 100644
@@ -22,7 +22,6 @@ config KVM
 	select PREEMPT_NOTIFIERS
 	select ANON_INODES
 	select S390_SWITCH_AMODE
-	select PREEMPT
 	---help---
 	  Support hosting paravirtualized guest machines using the SIE
 	  virtualization capability on the mainframe. This should work
arch/s390/kvm/intercept.c +3 -0
index 349581a..47a0b64 100644
@@ -105,6 +105,9 @@ static intercept_handler_t instruction_handlers[256] = {
 static int handle_noop(struct kvm_vcpu *vcpu)
 {
 	switch (vcpu->arch.sie_block->icptcode) {
+	case 0x0:
+		vcpu->stat.exit_null++;
+		break;
 	case 0x10:
 		vcpu->stat.exit_external_request++;
 		break;
arch/s390/kvm/kvm-s390.c +1 -4
index 98d1e73..0ac36a6 100644
@@ -31,6 +31,7 @@
 
 struct kvm_stats_debugfs_item debugfs_entries[] = {
 	{ "userspace_handled", VCPU_STAT(exit_userspace) },
+	{ "exit_null", VCPU_STAT(exit_null) },
 	{ "exit_validity", VCPU_STAT(exit_validity) },
 	{ "exit_stop_request", VCPU_STAT(exit_stop_request) },
 	{ "exit_external_request", VCPU_STAT(exit_external_request) },
@@ -221,10 +222,6 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 	vcpu->arch.guest_fpregs.fpc &= FPC_VALID_MASK;
 	restore_fp_regs(&vcpu->arch.guest_fpregs);
 	restore_access_regs(vcpu->arch.guest_acrs);
-
-	if (signal_pending(current))
-		atomic_set_mask(CPUSTAT_STOP_INT,
-			&vcpu->arch.sie_block->cpuflags);
 }
 
 void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
arch/s390/mm/Makefile +1 -0
index fb988a4..2a74581 100644
@@ -5,3 +5,4 @@
 obj-y	 := init.o fault.o extmem.o mmap.o vmem.o pgtable.o
 obj-$(CONFIG_CMM) += cmm.o
 obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
+obj-$(CONFIG_PAGE_STATES) += page-states.o
arch/s390/mm/init.c +3 -0
index fa31de6..29f3a63 100644
@@ -126,6 +126,9 @@ void __init mem_init(void)
         /* clear the zero-page */
         memset(empty_zero_page, 0, PAGE_SIZE);
 
+	/* Setup guest page hinting */
+	cmma_init();
+
 	/* this will put all low memory onto the freelists */
 	totalram_pages += free_all_bootmem();
 
arch/s390/mm/page-states.c new file +79 -0

79 lines not on this page · raw message

drivers/s390/char/tty3270.c +6 -9
index c1f2ade..5043150 100644
@@ -965,8 +965,7 @@ tty3270_write_room(struct tty_struct *tty)
  * Insert character into the screen at the current position with the
  * current color and highlight. This function does NOT do cursor movement.
  */
-static int
-tty3270_put_character(struct tty3270 *tp, char ch)
+static void tty3270_put_character(struct tty3270 *tp, char ch)
 {
 	struct tty3270_line *line;
 	struct tty3270_cell *cell;
@@ -986,7 +985,6 @@ tty3270_put_character(struct tty3270 *tp, char ch)
 	cell->character = tp->view.ascebc[(unsigned int) ch];
 	cell->highlight = tp->highlight;
 	cell->f_color = tp->f_color;
-	return 1;
 }
 
 /*
@@ -1612,16 +1610,15 @@ tty3270_write(struct tty_struct * tty,
 /*
  * Put single characters to the ttys character buffer
  */
-static void
-tty3270_put_char(struct tty_struct *tty, unsigned char ch)
+static int tty3270_put_char(struct tty_struct *tty, unsigned char ch)
 {
 	struct tty3270 *tp;
 
 	tp = tty->driver_data;
-	if (!tp)
-		return;
-	if (tp->char_count < TTY3270_CHAR_BUF_SIZE)
-		tp->char_buf[tp->char_count++] = ch;
+	if (!tp || tp->char_count >= TTY3270_CHAR_BUF_SIZE)
+		return 0;
+	tp->char_buf[tp->char_count++] = ch;
+	return 1;
 }
 
 /*
drivers/s390/cio/blacklist.c +169 -154

388 lines not on this page · raw message

drivers/s390/cio/cio.c +10 -29
index 08a5781..82c6a2d 100644
@@ -39,23 +39,6 @@ debug_info_t *cio_debug_msg_id;
 debug_info_t *cio_debug_trace_id;
 debug_info_t *cio_debug_crw_id;
 
-int cio_show_msg;
-
-static int __init
-cio_setup (char *parm)
-{
-	if (!strcmp (parm, "yes"))
-		cio_show_msg = 1;
-	else if (!strcmp (parm, "no"))
-		cio_show_msg = 0;
-	else
-		printk(KERN_ERR "cio: cio_setup: "
-		       "invalid cio_msg parameter '%s'", parm);
-	return 1;
-}
-
-__setup ("cio_msg=", cio_setup);
-
 /*
  * Function: cio_debug_init
  * Initializes three debug logs for common I/O:
@@ -166,7 +149,7 @@ cio_start_handle_notoper(struct subchannel *sch, __u8 lpm)
 
 	stsch (sch->schid, &sch->schib);
 
-	CIO_MSG_EVENT(0, "cio_start: 'not oper' status for "
+	CIO_MSG_EVENT(2, "cio_start: 'not oper' status for "
 		      "subchannel 0.%x.%04x!\n", sch->schid.ssid,
 		      sch->schid.sch_no);
 	sprintf(dbf_text, "no%s", sch->dev.bus_id);
@@ -567,10 +550,9 @@ cio_validate_subchannel (struct subchannel *sch, struct subchannel_id schid)
 	 * ... just being curious we check for non I/O subchannels
 	 */
 	if (sch->st != 0) {
-		CIO_DEBUG(KERN_INFO, 0,
-			  "Subchannel 0.%x.%04x reports "
-			  "non-I/O subchannel type %04X\n",
-			  sch->schid.ssid, sch->schid.sch_no, sch->st);
+		CIO_MSG_EVENT(4, "Subchannel 0.%x.%04x reports "
+			      "non-I/O subchannel type %04X\n",
+			      sch->schid.ssid, sch->schid.sch_no, sch->st);
 		/* We stop here for non-io subchannels. */
 		err = sch->st;
 		goto out;
@@ -588,7 +570,7 @@ cio_validate_subchannel (struct subchannel *sch, struct subchannel_id schid)
 		 * This device must not be known to Linux. So we simply
 		 * say that there is no device and return ENODEV.
 		 */
-		CIO_MSG_EVENT(4, "Blacklisted device detected "
+		CIO_MSG_EVENT(6, "Blacklisted device detected "
 			      "at devno %04X, subchannel set %x\n",
 			      sch->schib.pmcw.dev, sch->schid.ssid);
 		err = -ENODEV;
@@ -601,12 +583,11 @@ cio_validate_subchannel (struct subchannel *sch, struct subchannel_id schid)
 	sch->lpm = sch->schib.pmcw.pam & sch->opm;
 	sch->isc = 3;
 
-	CIO_DEBUG(KERN_INFO, 0,
-		  "Detected device %04x on subchannel 0.%x.%04X"
-		  " - PIM = %02X, PAM = %02X, POM = %02X\n",
-		  sch->schib.pmcw.dev, sch->schid.ssid,
-		  sch->schid.sch_no, sch->schib.pmcw.pim,
-		  sch->schib.pmcw.pam, sch->schib.pmcw.pom);
+	CIO_MSG_EVENT(6, "Detected device %04x on subchannel 0.%x.%04X "
+		      "- PIM = %02X, PAM = %02X, POM = %02X\n",
+		      sch->schib.pmcw.dev, sch->schid.ssid,
+		      sch->schid.sch_no, sch->schib.pmcw.pim,
+		      sch->schib.pmcw.pam, sch->schib.pmcw.pom);
 
 	/*
 	 * We now have to initially ...
drivers/s390/cio/cio.h +0 -2
index 3c75412..6e933ae 100644
@@ -118,6 +118,4 @@ extern void *cio_get_console_priv(void);
 #define cio_get_console_priv() NULL
 #endif
 
-extern int cio_show_msg;
-
 #endif
drivers/s390/cio/cio_debug.h +0 -6
index d7429ef..e64e827 100644
@@ -31,10 +31,4 @@ static inline void CIO_HEX_EVENT(int level, void *data, int length)
 	}
 }
 
-#define CIO_DEBUG(printk_level, event_level, msg...) do {	\
-		if (cio_show_msg)				\
-			printk(printk_level "cio: " msg);	\
-		CIO_MSG_EVENT(event_level, msg);		\
-	} while (0)
-
 #endif
drivers/s390/cio/css.c +2 -2
index 595e327..a769565 100644
@@ -570,7 +570,7 @@ static void reprobe_all(struct work_struct *unused)
 {
 	int ret;
 
-	CIO_MSG_EVENT(2, "reprobe start\n");
+	CIO_MSG_EVENT(4, "reprobe start\n");
 
 	need_reprobe = 0;
 	/* Make sure initial subchannel scan is done. */
@@ -578,7 +578,7 @@ static void reprobe_all(struct work_struct *unused)
 		   atomic_read(&ccw_device_init_count) == 0);
 	ret = for_each_subchannel_staged(NULL, reprobe_subchannel, NULL);
 
-	CIO_MSG_EVENT(2, "reprobe done (rc=%d, need_reprobe=%d)\n", ret,
+	CIO_MSG_EVENT(4, "reprobe done (rc=%d, need_reprobe=%d)\n", ret,
 		      need_reprobe);
 }
 
drivers/s390/cio/device.c +12 -13
index abfd601..e22813d 100644
@@ -341,7 +341,7 @@ ccw_device_remove_disconnected(struct ccw_device *cdev)
 		rc = device_schedule_callback(&cdev->dev,
 					      ccw_device_remove_orphan_cb);
 		if (rc)
-			CIO_MSG_EVENT(2, "Couldn't unregister orphan "
+			CIO_MSG_EVENT(0, "Couldn't unregister orphan "
 				      "0.%x.%04x\n",
 				      cdev->private->dev_id.ssid,
 				      cdev->private->dev_id.devno);
@@ -351,7 +351,7 @@ ccw_device_remove_disconnected(struct ccw_device *cdev)
 	rc = device_schedule_callback(cdev->dev.parent,
 				      ccw_device_remove_sch_cb);
 	if (rc)
-		CIO_MSG_EVENT(2, "Couldn't unregister disconnected device "
+		CIO_MSG_EVENT(0, "Couldn't unregister disconnected device "
 			      "0.%x.%04x\n",
 			      cdev->private->dev_id.ssid,
 			      cdev->private->dev_id.devno);
@@ -397,7 +397,7 @@ int ccw_device_set_offline(struct ccw_device *cdev)
 	if (ret == 0)
 		wait_event(cdev->private->wait_q, dev_fsm_final_state(cdev));
 	else {
-		CIO_MSG_EVENT(2, "ccw_device_offline returned %d, "
+		CIO_MSG_EVENT(0, "ccw_device_offline returned %d, "
 			      "device 0.%x.%04x\n",
 			      ret, cdev->private->dev_id.ssid,
 			      cdev->private->dev_id.devno);
@@ -433,7 +433,7 @@ int ccw_device_set_online(struct ccw_device *cdev)
 	if (ret == 0)
 		wait_event(cdev->private->wait_q, dev_fsm_final_state(cdev));
 	else {
-		CIO_MSG_EVENT(2, "ccw_device_online returned %d, "
+		CIO_MSG_EVENT(0, "ccw_device_online returned %d, "
 			      "device 0.%x.%04x\n",
 			      ret, cdev->private->dev_id.ssid,
 			      cdev->private->dev_id.devno);
@@ -451,7 +451,7 @@ int ccw_device_set_online(struct ccw_device *cdev)
 	if (ret == 0)
 		wait_event(cdev->private->wait_q, dev_fsm_final_state(cdev));
 	else
-		CIO_MSG_EVENT(2, "ccw_device_offline returned %d, "
+		CIO_MSG_EVENT(0, "ccw_device_offline returned %d, "
 			      "device 0.%x.%04x\n",
 			      ret, cdev->private->dev_id.ssid,
 			      cdev->private->dev_id.devno);
@@ -803,7 +803,7 @@ static void sch_attach_disconnected_device(struct subchannel *sch,
 	other_sch = to_subchannel(get_device(cdev->dev.parent));
 	ret = device_move(&cdev->dev, &sch->dev);
 	if (ret) {
-		CIO_MSG_EVENT(2, "Moving disconnected device 0.%x.%04x failed "
+		CIO_MSG_EVENT(0, "Moving disconnected device 0.%x.%04x failed "
 			      "(ret=%d)!\n", cdev->private->dev_id.ssid,
 			      cdev->private->dev_id.devno, ret);
 		put_device(&other_sch->dev);
@@ -933,7 +933,7 @@ io_subchannel_register(struct work_struct *work)
 			ret = device_reprobe(&cdev->dev);
 			if (ret)
 				/* We can't do much here. */
-				CIO_MSG_EVENT(2, "device_reprobe() returned"
+				CIO_MSG_EVENT(0, "device_reprobe() returned"
 					      " %d for 0.%x.%04x\n", ret,
 					      cdev->private->dev_id.ssid,
 					      cdev->private->dev_id.devno);
@@ -1086,7 +1086,7 @@ static void ccw_device_move_to_sch(struct work_struct *work)
 	rc = device_move(&cdev->dev, &sch->dev);
 	mutex_unlock(&sch->reg_mutex);
 	if (rc) {
-		CIO_MSG_EVENT(2, "Moving device 0.%x.%04x to subchannel "
+		CIO_MSG_EVENT(0, "Moving device 0.%x.%04x to subchannel "
 			      "0.%x.%04x failed (ret=%d)!\n",
 			      cdev->private->dev_id.ssid,
 			      cdev->private->dev_id.devno, sch->schid.ssid,
@@ -1446,8 +1446,7 @@ ccw_device_remove (struct device *dev)
 			wait_event(cdev->private->wait_q,
 				   dev_fsm_final_state(cdev));
 		else
-			//FIXME: we can't fail!
-			CIO_MSG_EVENT(2, "ccw_device_offline returned %d, "
+			CIO_MSG_EVENT(0, "ccw_device_offline returned %d, "
 				      "device 0.%x.%04x\n",
 				      ret, cdev->private->dev_id.ssid,
 				      cdev->private->dev_id.devno);
@@ -1524,7 +1523,7 @@ static int recovery_check(struct device *dev, void *data)
 	spin_lock_irq(cdev->ccwlock);
 	switch (cdev->private->state) {
 	case DEV_STATE_DISCONNECTED:
-		CIO_MSG_EVENT(3, "recovery: trigger 0.%x.%04x\n",
+		CIO_MSG_EVENT(4, "recovery: trigger 0.%x.%04x\n",
 			      cdev->private->dev_id.ssid,
 			      cdev->private->dev_id.devno);
 		dev_fsm_event(cdev, DEV_EVENT_VERIFY);
@@ -1554,7 +1553,7 @@ static void recovery_work_func(struct work_struct *unused)
 		}
 		spin_unlock_irq(&recovery_lock);
 	} else
-		CIO_MSG_EVENT(2, "recovery: end\n");
+		CIO_MSG_EVENT(4, "recovery: end\n");
 }
 
 static DECLARE_WORK(recovery_work, recovery_work_func);
@@ -1572,7 +1571,7 @@ void ccw_device_schedule_recovery(void)
 {
 	unsigned long flags;
 
-	CIO_MSG_EVENT(2, "recovery: schedule\n");
+	CIO_MSG_EVENT(4, "recovery: schedule\n");
 	spin_lock_irqsave(&recovery_lock, flags);
 	if (!timer_pending(&recovery_timer) || (recovery_phase != 0)) {
 		recovery_phase = 0;
drivers/s390/cio/device_fsm.c +22 -22

76 lines not on this page · raw message

drivers/s390/cio/device_id.c +2 -2
index dc4d87f..cba7020 100644
@@ -214,7 +214,7 @@ ccw_device_check_sense_id(struct ccw_device *cdev)
 		 *     sense id information. So, for intervention required,
 		 *     we use the "whack it until it talks" strategy...
 		 */
-		CIO_MSG_EVENT(2, "SenseID : device %04x on Subchannel "
+		CIO_MSG_EVENT(0, "SenseID : device %04x on Subchannel "
 			      "0.%x.%04x reports cmd reject\n",
 			      cdev->private->dev_id.devno, sch->schid.ssid,
 			      sch->schid.sch_no);
@@ -239,7 +239,7 @@ ccw_device_check_sense_id(struct ccw_device *cdev)
 
 		lpm = to_io_private(sch)->orb.lpm;
 		if ((lpm & sch->schib.pmcw.pim & sch->schib.pmcw.pam) != 0)
-			CIO_MSG_EVENT(2, "SenseID : path %02X for device %04x "
+			CIO_MSG_EVENT(4, "SenseID : path %02X for device %04x "
 				      "on subchannel 0.%x.%04x is "
 				      "'not operational'\n", lpm,
 				      cdev->private->dev_id.devno,
drivers/s390/cio/device_pgid.c +6 -6
index c52449a..ba55905 100644
@@ -79,7 +79,7 @@ __ccw_device_sense_pgid_start(struct ccw_device *cdev)
 			/* ret is 0, -EBUSY, -EACCES or -ENODEV */
 			if (ret != -EACCES)
 				return ret;
-			CIO_MSG_EVENT(2, "SNID - Device %04x on Subchannel "
+			CIO_MSG_EVENT(3, "SNID - Device %04x on Subchannel "
 				      "0.%x.%04x, lpm %02X, became 'not "
 				      "operational'\n",
 				      cdev->private->dev_id.devno,
@@ -159,7 +159,7 @@ __ccw_device_check_sense_pgid(struct ccw_device *cdev)
 		u8 lpm;
 
 		lpm = to_io_private(sch)->orb.lpm;
-		CIO_MSG_EVENT(2, "SNID - Device %04x on Subchannel 0.%x.%04x,"
+		CIO_MSG_EVENT(3, "SNID - Device %04x on Subchannel 0.%x.%04x,"
 			      " lpm %02X, became 'not operational'\n",
 			      cdev->private->dev_id.devno, sch->schid.ssid,
 			      sch->schid.sch_no, lpm);
@@ -275,7 +275,7 @@ __ccw_device_do_pgid(struct ccw_device *cdev, __u8 func)
 			return ret;
 	}
 	/* PGID command failed on this path. */
-	CIO_MSG_EVENT(2, "SPID - Device %04x on Subchannel "
+	CIO_MSG_EVENT(3, "SPID - Device %04x on Subchannel "
 		      "0.%x.%04x, lpm %02X, became 'not operational'\n",
 		      cdev->private->dev_id.devno, sch->schid.ssid,
 		      sch->schid.sch_no, cdev->private->imask);
@@ -317,7 +317,7 @@ static int __ccw_device_do_nop(struct ccw_device *cdev)
 			return ret;
 	}
 	/* nop command failed on this path. */
-	CIO_MSG_EVENT(2, "NOP - Device %04x on Subchannel "
+	CIO_MSG_EVENT(3, "NOP - Device %04x on Subchannel "
 		      "0.%x.%04x, lpm %02X, became 'not operational'\n",
 		      cdev->private->dev_id.devno, sch->schid.ssid,
 		      sch->schid.sch_no, cdev->private->imask);
@@ -362,7 +362,7 @@ __ccw_device_check_pgid(struct ccw_device *cdev)
 		return -EAGAIN;
 	}
 	if (irb->scsw.cc == 3) {
-		CIO_MSG_EVENT(2, "SPID - Device %04x on Subchannel 0.%x.%04x,"
+		CIO_MSG_EVENT(3, "SPID - Device %04x on Subchannel 0.%x.%04x,"
 			      " lpm %02X, became 'not operational'\n",
 			      cdev->private->dev_id.devno, sch->schid.ssid,
 			      sch->schid.sch_no, cdev->private->imask);
@@ -391,7 +391,7 @@ static int __ccw_device_check_nop(struct ccw_device *cdev)
 		return -ETIME;
 	}
 	if (irb->scsw.cc == 3) {
-		CIO_MSG_EVENT(2, "NOP - Device %04x on Subchannel 0.%x.%04x,"
+		CIO_MSG_EVENT(3, "NOP - Device %04x on Subchannel 0.%x.%04x,"
 			      " lpm %02X, became 'not operational'\n",
 			      cdev->private->dev_id.devno, sch->schid.ssid,
 			      sch->schid.sch_no, cdev->private->imask);
drivers/s390/s390mach.c +2 -1
index 4d4b542..5080f34 100644
@@ -48,10 +48,11 @@ s390_collect_crw_info(void *param)
 	int ccode;
 	struct semaphore *sem;
 	unsigned int chain;
+	int ignore;
 
 	sem = (struct semaphore *)param;
 repeat:
-	down_interruptible(sem);
+	ignore = down_interruptible(sem);
 	chain = 0;
 	while (1) {
 		if (unlikely(chain > 1)) {
include/asm-s390/kvm_host.h +1 -0
index f8204a4..18cbd8a 100644
@@ -104,6 +104,7 @@ struct sie_block {
 
 struct kvm_vcpu_stat {
 	u32 exit_userspace;
+	u32 exit_null;
 	u32 exit_external_request;
 	u32 exit_external_interrupt;
 	u32 exit_stop_request;
include/asm-s390/page.h +11 -0
index f0f4579..12fd9c4 100644
@@ -125,6 +125,17 @@ page_get_storage_key(unsigned long addr)
 	return skey;
 }
 
+#ifdef CONFIG_PAGE_STATES
+
+struct page;
+void arch_free_page(struct page *page, int order);
+void arch_alloc_page(struct page *page, int order);
+
+#define HAVE_ARCH_FREE_PAGE
+#define HAVE_ARCH_ALLOC_PAGE
+
+#endif
+
 #endif /* !__ASSEMBLY__ */
 
 /* to align the pointer to the (next) page boundary */
include/asm-s390/ptrace.h +2 -0
index 441d7c2..d7d4e2e 100644
@@ -471,6 +471,8 @@ struct task_struct;
 extern void user_enable_single_step(struct task_struct *);
 extern void user_disable_single_step(struct task_struct *);
 
+#define __ARCH_WANT_COMPAT_SYS_PTRACE
+
 #define user_mode(regs) (((regs)->psw.mask & PSW_MASK_PSTATE) != 0)
 #define instruction_pointer(regs) ((regs)->psw.addr & PSW_ADDR_INSN)
 #define regs_return_value(regs)((regs)->gprs[2])
include/asm-s390/system.h +6 -0
index c819ae2..e0d4500 100644
@@ -116,6 +116,12 @@ extern void pfault_fini(void);
 #define pfault_fini()		do { } while (0)
 #endif /* CONFIG_PFAULT */
 
+#ifdef CONFIG_PAGE_STATES
+extern void cmma_init(void);
+#else
+static inline void cmma_init(void) { }
+#endif
+
 #define finish_arch_switch(prev) do {					     \
 	set_fs(current->thread.mm_segment);				     \
 	account_vtime(prev);						     \