Skip to contentSkip to conversation

OOPS in ov511 driver

DISCUSSION Priit Laes 2 participants 3 messages May 13, 2008

lore
Share & tools
lore

Priit Laes

author
#0 lore raw

Hey!

I got following oops when unplugging some Creative-labeled webcam using ov511 driver. Machine is Core2 Duo 64-bit, Gentoo Linux, kernel is 2.6.25-05301-gc3bf9bc, gcc is 4.2.3 (Gentoo 4.2.3 p1.0)

usb 2-1: USB disconnect, address 7
ov511: ERROR: urb->status=-108: Unknown
ov511: usb_submit_urb() ret -19
ov511: ERROR: urb->status=-108: Unknown
ov511: usb_submit_urb() ret -19
usb 2-1: new full speed USB device using uhci_hcd and address 8 usb 2-1: configuration #1 chosen from 1 choice
ov511: USB OV511+ video device found
ov511: model: Creative Labs WebCam 3
ov511: Sensor is an OV7620
ov511: Device at usb-0000:00:1d.0-1 registered to minor 0

BUG: unable to handle kernel NULL pointer dereference at 00000000000000a8
IP: [<ffffffff8051487e>] mutex_lock+0x0/0xb
PGD 33b6a067 PUD 2e462067 PMD 0
Oops: 0002 [1] PREEMPT SMP
CPU 0
Modules linked in: ov511 videodev v4l1_compat iwl3945
Pid: 26378, comm: python Not tainted 2.6.25-05301-gc3bf9bc #59
RIP: 0010:[<ffffffff8051487e>]  [<ffffffff8051487e>] mutex_lock+0x0/0xb
RSP: 0018:ffff810022cefee0  EFLAGS: 00010293
RAX: ffff810022df9800 RBX: 00000000000000a8 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff81002990c540 RDI: 00000000000000a8
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000001
R10: 0000000000000009 R11: 0000000000000202 R12: ffff81002990c540
R13: ffff81003dd9a000 R14: ffff81003eabc900 R15: 00007f1bccd47b44
FS:  00007f1bd3f0a6f0(0000) GS:ffffffff806c2000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00000000000000a8 CR3: 000000002e79b000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process python (pid: 26378, threadinfo ffff810022cee000, task ffff81001dc72690)
Stack:  ffffffffa002a067 0000000000000008 ffff81002990c540 ffff81001ffc2960
 ffffffff80279453 ffff81002990c540 ffff81002635b340 0000000000000000
 ffff81002635b3c0 00007f1bcdb02d80 ffffffff80276c7e ffff81002635b340
Call Trace:
 [<ffffffffa002a067>] :ov511:ov51x_v4l1_close+0x47/0x133
 [<ffffffff80279453>] __fput+0xa1/0x147
 [<ffffffff80276c7e>] filp_close+0x5d/0x65
 [<ffffffff80277e54>] sys_close+0x76/0xb9
 [<ffffffff8020b40b>] system_call_after_swapgs+0x7b/0x80


Code: 1c 24 44 89 64 24 08 48 c7 44 24 20 45 25 24 80 48 89 44 24 28 48 89 44 24 30 e8 23 ff ff ff 48 83 c4 48 5b 41 5c 41 5d 41 5e c3 <f0> ff 0f 79 05 e8 68 01 00 00 c3 f0 ff 07 7f 05 e8 6d 01 00 00
RIP  [<ffffffff8051487e>] mutex_lock+0x0/0xb
 RSP <ffff810022cefee0>
CR2: 00000000000000a8
---[ end trace ca143223eefdc828 ]---
#1 lore raw

Am Dienstag 13 Mai 2008 10:09:57 schrieb Priit Laes:

Quoted 6 lines

Hey!

I got following oops when unplugging some Creative-labeled webcam using ov511 driver. Machine is Core2 Duo 64-bit, Gentoo Linux, kernel is 2.6.25-05301-gc3bf9bc, gcc is 4.2.3 (Gentoo 4.2.3 p1.0)

Quoted 11 lines

usb 2-1: USB disconnect, address 7
ov511: ERROR: urb->status=-108: Unknown
ov511: usb_submit_urb() ret -19
ov511: ERROR: urb->status=-108: Unknown
ov511: usb_submit_urb() ret -19
usb 2-1: new full speed USB device using uhci_hcd and address 8 usb 2-1: configuration #1 chosen from 1 choice
ov511: USB OV511+ video device found
ov511: model: Creative Labs WebCam 3
ov511: Sensor is an OV7620
ov511: Device at usb-0000:00:1d.0-1 registered to minor 0

Are you replugging the device?

Regards
Oliver

author
#2 lore raw

Ühel kenal päeval, T, 2008-05-13 kell 11:07, kirjutas Oliver Neukum:

Quoted 19 lines

Am Dienstag 13 Mai 2008 10:09:57 schrieb Priit Laes:

Quoted 6 lines

Hey!

I got following oops when unplugging some Creative-labeled webcam using ov511 driver. Machine is Core2 Duo 64-bit, Gentoo Linux, kernel is 2.6.25-05301-gc3bf9bc, gcc is 4.2.3 (Gentoo 4.2.3 p1.0)

Quoted 11 lines

usb 2-1: USB disconnect, address 7
ov511: ERROR: urb->status=-108: Unknown
ov511: usb_submit_urb() ret -19
ov511: ERROR: urb->status=-108: Unknown
ov511: usb_submit_urb() ret -19
usb 2-1: new full speed USB device using uhci_hcd and address 8 usb 2-1: configuration #1 chosen from 1 choice
ov511: USB OV511+ video device found
ov511: model: Creative Labs WebCam 3
ov511: Sensor is an OV7620
ov511: Device at usb-0000:00:1d.0-1 registered to minor 0

Quoted 1 line

Are you replugging the device?

Yeah, when looking at the dmesg output, probably something like this happened.