Skip to contentSkip to conversation

mpc86xx: Removed unused and unconfigured memory test code.

PATCH New Jon Loeliger 1 participant 1 message May 19, 2008

lore
Share & tools
lore

Jon Loeliger

author
#0 lore raw

PATCH 1/1 mpc86xx: Removed unused and unconfigured memory test code.

Besides, other common code exists.

Signed-off-by Jon Loeliger <[email protected]>

---

As per Wolfgang's request.

 board/freescale/mpc8610hpcd/mpc8610hpcd.c |   36 -----------------------------
 board/freescale/mpc8641hpcn/mpc8641hpcn.c |   36 -----------------------------
 include/configs/MPC8610HPCD.h             |    2 -
 include/configs/MPC8641HPCN.h             |    1 -
 4 files changed, 0 insertions(+), 75 deletions(-)
board/freescale/mpc8610hpcd/mpc8610hpcd.c +0 -36
index 3a855b5..ce563dc 100644
@@ -141,42 +141,6 @@ initdram(int board_type)
 }
 
 
-#if defined(CFG_DRAM_TEST)
-int
-testdram(void)
-{
-	uint *pstart = (uint *) CFG_MEMTEST_START;
-	uint *pend = (uint *) CFG_MEMTEST_END;
-	uint *p;
-
-	puts("SDRAM test phase 1:\n");
-	for (p = pstart; p < pend; p++)
-		*p = 0xaaaaaaaa;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0xaaaaaaaa) {
-			printf("SDRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-
-	puts("SDRAM test phase 2:\n");
-	for (p = pstart; p < pend; p++)
-		*p = 0x55555555;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0x55555555) {
-			printf("SDRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-
-	puts("SDRAM test passed.\n");
-	return 0;
-}
-#endif
-
-
 #if !defined(CONFIG_SPD_EEPROM)
 /*
  * Fixed sdram init -- doesn't use serial presence detect.
board/freescale/mpc8641hpcn/mpc8641hpcn.c +0 -36
index bb1f927..915fb58 100644
@@ -81,42 +81,6 @@ initdram(int board_type)
 }
 
 
-#if defined(CFG_DRAM_TEST)
-int
-testdram(void)
-{
-	uint *pstart = (uint *) CFG_MEMTEST_START;
-	uint *pend = (uint *) CFG_MEMTEST_END;
-	uint *p;
-
-	puts("SDRAM test phase 1:\n");
-	for (p = pstart; p < pend; p++)
-		*p = 0xaaaaaaaa;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0xaaaaaaaa) {
-			printf("SDRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-
-	puts("SDRAM test phase 2:\n");
-	for (p = pstart; p < pend; p++)
-		*p = 0x55555555;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0x55555555) {
-			printf("SDRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-
-	puts("SDRAM test passed.\n");
-	return 0;
-}
-#endif
-
-
 #if !defined(CONFIG_SPD_EEPROM)
 /*
  * Fixed sdram init -- doesn't use serial presence detect.
include/configs/MPC8610HPCD.h +0 -2
index 585411c..ed75357 100644
@@ -71,10 +71,8 @@
 #define CONFIG_BOARD_EARLY_INIT_F	1	/* Call board_pre_init */
 #define CONFIG_MISC_INIT_R		1
 
-#undef	CFG_DRAM_TEST			/* memory test, takes time */
 #define CFG_MEMTEST_START	0x00200000	/* memtest region */
 #define CFG_MEMTEST_END		0x00400000
-#define CFG_ALT_MEMTEST
 
 /*
  * Base addresses -- Note these are effective addresses where the
include/configs/MPC8641HPCN.h +0 -1
index a8d0077..d7a7f90 100644
@@ -86,7 +86,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 #define CONFIG_BOARD_EARLY_INIT_F	1	/* Call board_pre_init */
 
-#undef	CFG_DRAM_TEST			/* memory test, takes time */
 #define CFG_MEMTEST_START	0x00200000	/* memtest region */
 #define CFG_MEMTEST_END		0x00400000
Signature · 1 line
1.5.5.1.147.g867f