Skip to contentSkip to conversation

Problem regarding CA0106

DISCUSSION Travis Place 2 participants 3 messages Jun 13, 2008 – Jun 16, 2008 2 messages not in the archive

lore
Share & tools
lore
#0 lore raw

Just been speaking with a guy in #alsa about the problems with his "MSI K8N Diamond MB" which has an onboard "SB Live 24bit" or "Audigy".

While looking through ca0106_main.c in GIT, i saw the following section:

/* MSI K8N Diamond Motherboard with onboard SB Live 24bit without AC97 */

	 /* SB0438
	  * CTRL:CA0106-DAT
	  * ADC: WM8775SEDS
	  * DAC: CS4382-KQZ
	  */
	 { .serial = 0x10091462,
	   .name   = "MSI K8N Diamond MB [SB0438]",
	   .gpio_type = 2,
	   .i2c_adc = 1 } ,

For this guys sound to work, we had to change the serial line to:

	 { .serial = 0x10091102,

Seems to be a bit hackish, and maybe some more investigation is required, but, it got sound to work, and the card is recognised.

Perhaps there is (for some odd reason) 2 variants of the onboard sound on that motherboard (Perhaps a rev 1.0 and rev 1.1 motherboard difference?)

Let me know if any more information is required, or if I can just make and submit a patch (ill add a new section for the new card, not the hackish way).

Thanks,
Travis Place

#1 lore raw

At Sat, 14 Jun 2008 03:18:33 +1000,

Quoted 18 lines · Travis Place

Just been speaking with a guy in #alsa about the problems with his "MSI K8N Diamond MB" which has an onboard "SB Live 24bit" or "Audigy".

While looking through ca0106_main.c in GIT, i saw the following section:

/* MSI K8N Diamond Motherboard with onboard SB Live 24bit without AC97 */

	 /* SB0438
	  * CTRL:CA0106-DAT
	  * ADC: WM8775SEDS
	  * DAC: CS4382-KQZ
	  */
	 { .serial = 0x10091462,
	   .name   = "MSI K8N Diamond MB [SB0438]",
	   .gpio_type = 2,
	   .i2c_adc = 1 } ,
Quoted 3 lines

For this guys sound to work, we had to change the serial line to:

	 { .serial = 0x10091102,

Does it mean that this number 1009:1102 is missing, or a wrong 1009:1462 entry matches with his hardware?

In the former case, it happens often. We just need to add a new entry for the newer model. In the latter case, it's odd.

thanks,

Takashi

#4 lore raw
In reply to a message not in the archive
Quoted 28 lines · Takashi Iwai

At Tue, 17 Jun 2008 01:52:08 +1000,

Quoted 26 lines · Travis Place
Quoted 24 lines · Takashi Iwai

At Sat, 14 Jun 2008 03:18:33 +1000,

Quoted 21 lines · Travis Place

Just been speaking with a guy in #alsa about the problems with his "MSI K8N Diamond MB" which has an onboard "SB Live 24bit" or "Audigy".

While looking through ca0106_main.c in GIT, i saw the following section:

/* MSI K8N Diamond Motherboard with onboard SB Live 24bit without AC97 */

	 /* SB0438
	  * CTRL:CA0106-DAT
	  * ADC: WM8775SEDS
	  * DAC: CS4382-KQZ
	  */
	 { .serial = 0x10091462,
	   .name   = "MSI K8N Diamond MB [SB0438]",
	   .gpio_type = 2,
	   .i2c_adc = 1 } ,

For this guys sound to work, we had to change the serial line to:

	 { .serial = 0x10091102,
Quoted 9 lines
Quoted 6 lines
Quoted 3 lines

Does it mean that this number 1009:1102 is missing, or a wrong 1009:1462 entry matches with his hardware?

Well, it appears to me (due to another report filed previously) that the motherboard is a 'newer revision' and has a different ID for the soundcard.

Hm, so you didn't receive alsa-info.sh or "lspci -nv" output?

Of course I got alsa-info.sh output :)
(asks himself why he didnt include it though)

http://pastebin.ca/1048644

Quoted 11 lines
Quoted 8 lines
Quoted 3 lines

In the former case, it happens often. We just need to add a new entry for the newer model. In the latter case, it's odd.

I think that adding the new ID to the driver wont cause any immediate problems. The old value (1009:1462) should remain, until we can confirm it against another K8N Diamond motherboard (although im not sure how common these boards are).

Yeah, I guess so, too. But just to be sure...

Well, we'll just have to see what happens, I guess.

For the record, in both older ALSA versions, and 1.0.16, changing only the serial seems to be sufficient. So adding another serial should be an easy fix.

Thanks,
Travis

Quoted 2 lines

Takashi

_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel