hdparm -M acoustic management for sata disks?
Dear all,
why is acoustic management via hdparm not supported for sata disks?
# hdparm -M /dev/sda
/dev/sda:
acoustic = not supported
# sudo hdparm -M 254 /dev/sda
/dev/sda:
setting acoustic management to 254 HDIO_DRIVE_CMD:ACOUSTIC failed: Input/output error
acoustic = not supported
Is there any patch flying around that already enables this or even any ETA in the current mainstream?
Thanks!
Soeren
Quoted 8 lines · Soeren Sonnenburg
Dear all,
why is acoustic management via hdparm not supported for sata disks?
# hdparm -M /dev/sda
/dev/sda:
acoustic = not supported
..
No, that means that your *drive* doesn't support it. Check for yourself, with "hdparm -I /dev/sda | grep Acoustic".
..
Quoted 2 lines
Is there any patch flying around that already enables this or even any ETA in the current mainstream?
..
No patch required -- hdparm (newer versions) already do this correctly.
Cheers
Quoted 5 lines · Mark Lord
Quoted 4 lines · Soeren Sonnenburg
Dear all,
why is acoustic management via hdparm not supported for sata disks?
Quoted 8 lines
Quoted 4 lines
# hdparm -M /dev/sda
/dev/sda:
acoustic = not supported..
No, that means that your *drive* doesn't support it. Check for yourself, with "hdparm -I
/dev/sda| grep Acoustic".
Just to be sure, did you mean grep acoustic (lowercase)? Because it is listed there under Capabilities:
Recommended acoustic management value: 128, current value: 0
I've tried with the 5 sata drives I could get my hands on, they all list some recommended acoustic management value but all fail the same way
# hdparm -M 128 /dev/sda
/dev/sda:
setting acoustic management to 128 HDIO_DRIVE_CMD:ACOUSTIC failed: Input/output error
acoustic = not supported
Quoted 6 lines
..
Quoted 2 lines
Is there any patch flying around that already enables this or even any ETA in the current mainstream?
..
No patch required -- hdparm (newer versions) already do this correctly.
I have hdparm v8.9 here, is that new enough?
Thanks for you help,
Soeren
Quoted 3 lines · Soeren Sonnenburg
Just to be sure, did you mean grep acoustic (lowercase)? Because it is
listed there under Capabilities: Recommended acoustic management value: 128, current value: 0
..
Ahh.. That part of the output just shows the "current setting field",
which is zero (0) or "invalid" in your case. That's a display error
in hdparm -- it probably shouldn't bother with that field when the feature is missing from the feature list that is given lower down in the output. (the reason it doesn't discard it today, is that early drives had the feature but didn't report it lower down.. but we can distinguish those drives by ATA version number now).
Here's hdparm-8.9 on a drive that *does* support the feature:
$ hdparm -I /dev/sda | grep Acoustic
* Automatic Acoustic Management feature set$ hdparm -M /dev/sda
/dev/sda:
acoustic = 254 (128=quiet ... 254=fast)
$ hdparm -M128 /dev/sda
/dev/sda:
setting acoustic management to 128
acoustic = 128 (128=quiet ... 254=fast)
$ hdparm -M254 /dev/sda
/dev/sda:
setting acoustic management to 254
acoustic = 254 (128=quiet ... 254=fast)
Quoted 18 lines · Mark Lord
..
Here's hdparm-8.9 on a drive that *does* support the feature:$ hdparm -I /dev/sda | grep Acoustic * Automatic Acoustic Management feature set$ hdparm -M /dev/sda
/dev/sda:
acoustic = 254 (128=quiet ... 254=fast)$ hdparm -M128 /dev/sda
/dev/sda:
setting acoustic management to 128
acoustic = 128 (128=quiet ... 254=fast)
Quoted 5 lines
$ hdparm -M254 /dev/sda
/dev/sda:
setting acoustic management to 254
acoustic = 254 (128=quiet ... 254=fast)
..
And one more:
$ hdparm -M0 /dev/sda
/dev/sda:
setting acoustic management to 0
acoustic = 254 (128=quiet ... 254=fast)
$ hdparm -I /dev/sda | grep -i acoustic
Recommended acoustic management value: 128, current value: 254
Automatic Acoustic Management feature set(the lack of a '*' on that last line indicates the feature is no longer enabled).
-ml
Quoted 23 lines · On Saturday 21 June 2008 18:40:56 Soeren Sonnenburg wrote:
Quoted 7 lines · Mark Lord
Quoted 6 lines · Soeren Sonnenburg
Dear all,
why is acoustic management via hdparm not supported for sata disks?
# hdparm -M /dev/sdaQuoted 7 lines
Quoted 2 lines
/dev/sda:
acoustic = not supported..
No, that means that your *drive* doesn't support it. Check for yourself, with "hdparm -I
/dev/sda| grep Acoustic".Just to be sure, did you mean grep acoustic (lowercase)? Because it is listed there under Capabilities:
Recommended acoustic management value: 128, current value: 0I've tried with the 5 sata drives I could get my hands on, they all list some recommended acoustic management value but all fail the same way
Quoted 7 lines
# hdparm -M 128 /dev/sda
/dev/sda:
setting acoustic management to 128 HDIO_DRIVE_CMD:ACOUSTIC failed: Input/output error
acoustic = not supported
Aren't they Seagate drives? They're known not to support acoustic management.
Quoted 18 lines
Quoted 8 lines
..
Quoted 2 lines
Is there any patch flying around that already enables this or even any ETA in the current mainstream?
..
No patch required -- hdparm (newer versions) already do this correctly.
I have hdparm v8.9 here, is that new enough?
Thanks for you help,
Soeren
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Signature · 1 line
Ondrej Zary
Quoted 34 lines · Mark Lord
Quoted 18 lines · Mark Lord
..
Here's hdparm-8.9 on a drive that *does* support the feature:$ hdparm -I /dev/sda | grep Acoustic * Automatic Acoustic Management feature set$ hdparm -M /dev/sda
/dev/sda:
acoustic = 254 (128=quiet ... 254=fast)$ hdparm -M128 /dev/sda
/dev/sda:
setting acoustic management to 128
acoustic = 128 (128=quiet ... 254=fast)Quoted 5 lines
$ hdparm -M254 /dev/sda
/dev/sda:
setting acoustic management to 254
acoustic = 254 (128=quiet ... 254=fast)..
And one more:
$ hdparm -M0 /dev/sda
/dev/sda:
setting acoustic management to 0
acoustic = 254 (128=quiet ... 254=fast)
Quoted 5 lines
$ hdparm -I /dev/sda | grep -i acoustic Recommended acoustic management value: 128, current value: 254 Automatic Acoustic Management feature set(the lack of a '*' on that last line indicates the feature is no longer enabled).
OK, I guess I have to accept that the drives I have here just don't support AAM - just couldn't imagine that rather new 750G drives etc don't have that feature :(
Thanks for the clarifications,
Soeren
Quoted 10 lines · Ondrej Zary
Quoted 5 lines · On Saturday 21 June 2008 18:40:56 Soeren Sonnenburg wrote:
Quoted 4 lines · Mark Lord
Quoted 3 lines · Soeren Sonnenburg
Dear all,
why is acoustic management via hdparm not supported for sata
disks?
Quoted 3 lines
Quoted 1 line
[...]
# hdparm -M 128 /dev/sda
Quoted 7 lines
Quoted 5 lines
/dev/sda:
setting acoustic management to 128 HDIO_DRIVE_CMD:ACOUSTIC failed: Input/output error
acoustic = not supportedAren't they Seagate drives? They're known not to support acoustic management.
Yes all of them were seagate drives.
So just bad luck... I should simply not have exchanged that noise fan - now I head the hard-disks seeking...
Am I guessing right that samsung, hitachi et.al just do have support for AAM?
Soeren
Quoted 2 lines · Soeren Sonnenburg
Am I guessing right that samsung, hitachi et.al just do have support for AAM?
Model Number: SAMSUNG HD501LJ
Recommended acoustic management value: 254, current value: 254
* Automatic Acoustic Management feature set
My samsung drive supports it, but I do not hear any difference at all.
Among the most quiet drives I ever used are the samsung PATA (spinpoint) ones.
Signature · 1 line
left blank, right bald
Quoted 2 lines
I've tried with the 5 sata drives I could get my hands on, they all list some recommended acoustic management value but all fail the same way
A lot of drives dropped the acoustic management stuff internally. If I remember rightly there was a patent dispute about it just after it got into the ATA standard.
Alan
Soeren Sonnenburg wrote:
[]
Quoted 2 lines
Am I guessing right that samsung, hitachi et.al just do have support for AAM?
Well, it was a neat surprise to me when I discovered that a newly purchased - not Seagate which I almost always used - drive has all the acoustic stuff in place.
ATA device, with non-removable media
Model Number: Hitachi HUA721050KLA330
Firmware Revision: GK6OA70M
Recommended acoustic management value: 128, current value: 128
* Automatic Acoustic Management feature set
...
And it's indeed more quiet when seeking if acoustic management value is set to 128, and quite more load when set to 255. Speed decreases a bit (I didn't do any measurements), but not much.
Western Digital drives also has acoustic management in place. At least some of them. But I never heard of this stuff present for Seagate drives - my guess is that those are in a "good" compromise between speed and loudness already :)
/mjt