Problems with ATI USB Hybrid
Hi All,
I am trying to install an ATI TV Wonder HD 600 USB card and not
having any luck. No matter what I try, there is no /dev/video and also no /dev/dvb. The module seems to load OK, but the card is not found. Yast sees the card, but only identifies it as a USB device and not a TV card. I'll include what info I have. I would appreciate any help offered. I am trying my best to eliminate Microsoft from my systems. This driver problem is one of the last major headaches. I'm not sure if this matters, but I need to set it up as NTSC-M with us cable. Channel 3 will be the only channel used.
Yast Hardware information states:
102: udi =
'/org/freedesktop/Hal/devices/usb_device_438_b002_660729005035'
info.subsystem = 'usb_device'
usb_device.vendor = 'Advanced Micro Devices, Inc.' usb_device.bus_number = 2 (0x2)
linux.subsystem = 'usb'
info.linux.driver = 'usb'
usb_device.product = 'ATI TV Wonder 600 USB 2.0' info.product = 'ATI TV Wonder 600 USB 2.0' linux.device_file = '/dev/bus/usb/002/008' usb_device.linux.sysfs_path =
'/sys/devices/pci0000:00/0000:00:02.1/usb2/2-1/2-1.7'
usb_device.device_revision_bcd = 272 (0x110) info.udi =
'/org/freedesktop/Hal/devices/usb_device_438_b002_660729005035'
usb_device.configuration_value = 1 (0x1) usb_device.max_power = 500 (0x1f4) usb_device.num_configurations = 1 (0x1) usb_device.num_ports = 0 (0x0) usb_device.num_interfaces = 1 (0x1) usb_device.linux.device_number = 8 (0x8) usb_device.device_class = 0 (0x0)
usb_device.serial = '660729005035'
linux.sysfs_path =
'/sys/devices/pci0000:00/0000:00:02.1/usb2/2-1/2-1.7'
usb_device.device_subclass = 0 (0x0)
info.vendor = 'Advanced Micro Devices, Inc.' usb_device.speed = 480.000
info.parent =
'/org/freedesktop/Hal/devices/usb_device_50d_237_noserial'
usb_device.device_protocol = 0 (0x0) usb_device.version = 2.00000
usb_device.vendor_id = 1080 (0x438) usb_device.is_self_powered = false usb_device.product_id = 45058 (0xb002) usb_device.can_wake_up = false
linux.hotplug_type = 2 (0x2)
Pertinent lsmod info:
Module Size Used Byem28xx_dvb 26884 0dvb_core 109348 1 em28xx_dvb
em28xx 81836 1 em28xx_dvbcompat_ioctl32 25856 1 em28xx
videodev 55040 2 em28xx,compat_ioctl32
v4l1_compat 31620 1 videodev videobuf_vmalloc 25476 1 em28xx videobuf_core 38788 2 em28xx,videobuf_vmalloc ir_common 60932 2 ir_kbd_i2c,em28xx v4l2_common 29824 1 em28xx tveeprom 30724 1 em28xx
lsusb gives me this:
Bus 002 Device 008: ID 0438:b002 Advanced Micro Devices, Inc.
dmesg shows:
fuse init (API version 7.9)
Linux video capture interface: v2.00
em28xx v4l2 driver version 0.1.0 loaded
usbcore: registered new interface driver em28xx
Em28xx: Initialized (Em28xx dvb Extension) extension
Xine posted a couple of warning messages:
Jul 8 12:26:44 Opto xinetd[3495]: No such internal service: chargen/raw
- DISABLING
Jul 8 12:26:45 Opto xinetd[3495]: Port not specified and can't find
service: netstat with getservbyname
Jul 8 12:26:45 Opto xinetd[3495]: No such internal service:
servers/stream - DISABLING
Jul 8 12:26:45 Opto xinetd[3495]: No such internal service:
services/stream - DISABLING
When I open Xine and try to connect to DVB. it simply states:
Input plugin failed to open mrl 'Sorry, No DVB input device found
Thanks in advance,
Ronnie Bailey
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Hello,
2008/7/8 Ronnie Bailey <[email protected]>:
Quoted 89 lines
Hi All,
I am trying to install an ATI TV Wonder HD 600 USB card and not having
any luck. No matter what I try, there is no/dev/videoand also no/dev/dvb. The module seems to load OK, but the card is not found. Yast sees the card, but only identifies it as a USB device and not a TV card. I'll include what info I have. I would appreciate any help offered. I am trying my best to eliminate Microsoft from my systems. This driver problem is one of the last major headaches. I'm not sure if this matters, but I need to set it up as NTSC-M with us cable. Channel 3 will be the only channel used.Yast Hardware information states:
102: udi = '/org/freedesktop/Hal/devices/usb_device_438_b002_660729005035' info.subsystem = '
usb_device'
usb_device.vendor = 'Advanced Micro Devices, Inc.' usb_device.bus_number = 2 (0x2)
linux.subsystem = 'usb'
info.linux.driver = 'usb'
usb_device.product = 'ATI TV Wonder 600 USB 2.0'
info.product = 'ATI TV Wonder 600 USB 2.0'
linux.device_file = '/dev/bus/usb/002/008' usb_device.linux.sysfs_path =
'/sys/devices/pci0000:00/0000:00:02.1/usb2/2-1/2-1.7'
usb_device.device_revision_bcd = 272 (0x110)
info.udi = '/org/freedesktop/Hal/devices/usb_device_438_b002_660729005035' usb_device.configuration_value = 1 (0x1)
usb_device.max_power = 500 (0x1f4) usb_device.num_configurations = 1 (0x1)
usb_device.num_ports = 0 (0x0)
usb_device.num_interfaces = 1 (0x1) usb_device.linux.device_number = 8 (0x8) usb_device.device_class = 0 (0x0)
usb_device.serial = '660729005035'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb2/2-1/2-1.7' usb_device.device_subclass = 0 (0x0)
info.vendor = 'Advanced Micro Devices, Inc.'
usb_device.speed = 480.000
info.parent = '/org/freedesktop/Hal/devices/usb_device_50d_237_noserial' usb_device.device_protocol = 0 (0x0)
usb_device.version = 2.00000
usb_device.vendor_id = 1080 (0x438)
usb_device.is_self_powered = false
usb_device.product_id = 45058 (0xb002)
usb_device.can_wake_up = false
linux.hotplug_type = 2 (0x2)Pertinent lsmod info:
Module Size Used By
em28xx_dvb26884 0dvb_core109348 1em28xx_dvb
em28xx 81836 1em28xx_dvbcompat_ioctl3225856 1 em28xx
videodev 55040 2 em28xx,compat_ioctl32v4l1_compat 31620 1 videodev videobuf_vmalloc 25476 1 em28xx videobuf_core 38788 2 em28xx,videobuf_vmalloc ir_common 60932 2 ir_kbd_i2c,em28xx v4l2_common 29824 1 em28xx tveeprom 30724 1 em28xxlsusb gives me this:
Bus 002 Device 008: ID 0438:b002 Advanced Micro Devices, Inc.
dmesg shows:
fuse init (API version 7.9)
Linux video capture interface: v2.00
em28xx v4l2 driver version 0.1.0 loaded
usbcore: registered new interface driver em28xx
Em28xx: Initialized (Em28xx dvb Extension) extensionXine posted a couple of warning messages:
Jul 8 12:26:44 Opto xinetd[3495]: No such internal service: chargen/raw - DISABLING
Jul 8 12:26:45 Opto xinetd[3495]: Port not specified and can't find service:
netstat with getservbynameJul 8 12:26:45 Opto xinetd[3495]: No such internal service: servers/stream - DISABLING
Jul 8 12:26:45 Opto xinetd[3495]: No such internal service: services/stream
- DISABLINGWhen I open Xine and try to connect to DVB. it simply states:
Quoted 9 lines
Input plugin failed to open mrl 'Sorry, No DVB input device found
Thanks in advance,
Ronnie Bailey
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
I'm wondering why it tried to load the em28xx driver. Do you have some other device in the system that is em28xx based?
Could you please provide the output of "lsusb -v" for the device in question.
Thanks,
Signature · 8 lines
Devin J. Heitmueller http://www.devinheitmueller.com AIM: devinheitmueller _______________________________________________ linux-dvb mailing list [email protected] http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb