kernel crunch to a halt with e1000e driver
Hello guys,
Latest linux git tree, noticed the e1000 driver no longer worked with my pci express nic. e1000e works but has the following bug...
Problem: When system grinds to a halt when unplugging the cord from the nic.
Let me know if you need any more info.
Kernel Message:
ul 23 15:59:28 Athas eth0: Link is Up 1000 Mbps Full Duplex, Flow
Control: None
Jul 23 15:59:28 Athas ------------[ cut here ]------------ Jul 23 15:59:28 Athas kernel BUG at net/core/dev.c:1328! Jul 23 15:59:28 Athas invalid opcode: 0000 [1] SMP Jul 23 15:59:28 Athas CPU 1 Jul 23 15:59:28 Athas Modules linked in: xt_MARK ipt_REDIRECT xt_state xt_TCPMSS xt_tcpudp iptable_mangle iptable_nat n$ Jul 23 15:59:28 Athas Pid: 12, comm: events/1 Not tainted 2.6.26 #1 Jul 23 15:59:28 Athas RIP: 0010:[<ffffffff8038db39>] [<ffffffff8038db39>] __netif_schedule+0xa/0x4b Jul 23 15:59:28 Athas RSP: 0018:ffff88019fd0fe30 EFLAGS: 00010246 Jul 23 15:59:28 Athas RAX: ffff88019f6f2b90 RBX: 0000000000000000 RCX: ffff88019f6f2b80 Jul 23 15:59:28 Athas RDX: 00000000ffffffff RSI: 0000000000000286 RDI: ffffffff805cfac0 Jul 23 15:59:28 Athas RBP: ffff88019eddc640 R08: 00000000000013ba R09: ffff88019fc66858 Jul 23 15:59:28 Athas R10: 0000000000000400 R11: 0000000000400000 R12: 0000000000000000 Jul 23 15:59:28 Athas R13: 0000000000000000 R14: ffff88019eddc970 R15: ffff88019eddc000 Jul 23 15:59:28 Athas FS: 0000000000000000(0000) GS:ffff88019fc09480(0000) knlGS:0000000000000000 Jul 23 15:59:28 Athas CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b Jul 23 15:59:28 Athas CR2: 00007f74831d6030 CR3: 0000000192a46000 CR4: 00000000000006e0 Jul 23 15:59:28 Athas DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 Jul 23 15:59:28 Athas DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Jul 23 15:59:28 Athas Process events/1 (pid: 12, threadinfo ffff88019fd0e000, task ffff88019fc66820) Jul 23 15:59:28 Athas Stack: 0000000000000000 ffffffffa00d66e9 ffffffff807b0bc0 ffff88019f6f2940 Jul 23 15:59:28 Athas 0000000000000286 0000000000000000 0000000000000202 000000009fc62ca0 Jul 23 15:59:28 Athas ffff88019eddc968 ffff88019fc09880 ffffffffa00d626d ffff88019fc09888 Jul 23 15:59:28 Athas Call Trace: Jul 23 15:59:28 Athas [<ffffffffa00d66e9>] ? e1000_watchdog_task +0x47c/0x695 [e1000e] Jul 23 15:59:28 Athas [<ffffffffa00d626d>] ? e1000_watchdog_task +0x0/0x695 [e1000e] Jul 23 15:59:28 Athas [<ffffffff8023c8cd>] ? run_workqueue+0x7a/0x100 Jul 23 15:59:28 Athas [<ffffffff8023cbce>] ? worker_thread+0x96/0xa5 Jul 23 15:59:28 Athas [<ffffffff8023fcbf>] ? autoremove_wake_function +0x0/0x2e Jul 23 15:59:28 Athas [<ffffffff8023cb38>] ? worker_thread+0x0/0xa5 Jul 23 15:59:28 Athas [<ffffffff8023f9b1>] ? kthread+0x47/0x73 Jul 23 15:59:28 Athas [<ffffffff8022c35f>] ? schedule_tail+0x27/0x5f Jul 23 15:59:28 Athas [<ffffffff8020cd99>] ? child_rip+0xa/0x11 Jul 23 15:59:28 Athas [<ffffffff8023f96a>] ? kthread+0x0/0x73 Jul 23 15:59:28 Athas [<ffffffff8020cd8f>] ? child_rip+0x0/0x11 Jul 23 15:59:28 Athas Jul 23 15:59:28 Athas Jul 23 15:59:28 Athas Code: 00 00 48 63 80 48 e0 ff ff a9 00 00 ff 0f 75 07 9c 58 f6 c4 02 75 05 e9 9f ff ff ff e9 cb a$ Jul 23 15:59:28 Athas RIP [<ffffffff8038db39>] __netif_schedule +0xa/0x4b Jul 23 15:59:28 Athas RSP <ffff88019fd0fe30> Jul 23 15:59:28 Athas ---[ end trace 3accc2d688eaad80 ]---
Lspci -vv
2:00.0 Ethernet controller: Intel Corporation 82572EI Gigabit Ethernet Controller (Copper) (rev 06)
Subsystem: Intel Corporation PRO/1000 PT Desktop Adapter
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 216
Region 0: Memory at f8020000 (32-bit, non-prefetchable)
[size=128K]
Region 1: Memory at f8000000 (32-bit, non-prefetchable)
[size=128K]
Region 2: I/O ports at b000 [size=32]
[virtual] Expansion ROM at fb300000 [disabled] [size=128K]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0
+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+
Queue=0/0 Enable+
Address: 00000000fee0f00c Data: 41b9
Capabilities: [e0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
<512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s,
Latency L0 <4us, L1 <64us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Advanced Error Reporting <?>
Capabilities: [140] Device Serial Number 8d-bf-0b-ff-ff-17-15-00
Desg:
eth0: (PCI Express:2.5GB/s:Width x1) 00:xx:xx:xx:xx:xx
eth0: Intel(R) PRO/1000 Network Connection
eth0: MAC: 1, PHY: 4, PBA No: d50854-001
Regards,
Will Trives
Quoted 8 lines · Will Trives
Hello guys,
Latest linux git tree, noticed the e1000 driver no longer worked with my pci express nic. e1000e works but has the following bug...
Problem: When system grinds to a halt when unplugging the cord from the nic.
Quoted 8 lines
Let me know if you need any more info.
Kernel Message:
ul 23 15:59:28 Athas eth0: Link is Up 1000 Mbps Full Duplex, Flow
Control: NoneJul 23 15:59:28 Athas ------------[ cut here ]------------ Jul 23 15:59:28 Athas kernel BUG at net/core/dev.c:1328!
This should be fixed in the latest git tree. Please pull the latest git tree (Torvalds) and let me know if you still see this issue.
Signature · 2 lines
Cheers, Jeff
I updated and no longer experience the issue. Thank you.
Quoted 21 lines · Jeff Kirsher
Quoted 8 lines · Will Trives
Hello guys,
Latest linux git tree, noticed the e1000 driver no longer worked with my pci express nic. e1000e works but has the following bug...
Problem: When system grinds to a halt when unplugging the cord from the nic.
Quoted 8 lines
Let me know if you need any more info.
Kernel Message:
ul 23 15:59:28 Athas eth0: Link is Up 1000 Mbps Full Duplex, Flow
Control: NoneJul 23 15:59:28 Athas ------------[ cut here ]------------ Jul 23 15:59:28 Athas kernel BUG at net/core/dev.c:1328!This should be fixed in the latest git tree. Please pull the latest git tree (Torvalds) and let me know if you still see this issue.