Skip to contentSkip to conversation

spitz: MONO -> MONO1

PATCH Applied Dmitry Baryshkov 3 participants 4 messages Aug 11, 2008 – Aug 12, 2008

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 spitz: MONO -> MONO1

Correct route name to be MONO1 instead of MONO to follow recent fix in wm8750.

---
 sound/soc/pxa/spitz.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
sound/soc/pxa/spitz.c +1 -1
index eefc25b..37cb768 100644
@@ -297,7 +297,7 @@ static int spitz_wm8750_init(struct snd_soc_codec *codec)
 	snd_soc_dapm_disable_pin(codec, "LINPUT3");
 	snd_soc_dapm_disable_pin(codec, "RINPUT3");
 	snd_soc_dapm_disable_pin(codec, "OUT3");
-	snd_soc_dapm_disable_pin(codec, "MONO");
+	snd_soc_dapm_disable_pin(codec, "MONO1");
 
 	/* Add spitz specific controls */
 	for (i = 0; i < ARRAY_SIZE(wm8750_spitz_controls); i++) {
Signature · 1 line
1.5.6.3
#1 lore raw

PATCH 1/1 wm8750: add missing VREF output

Add missing output VREF. After a65f0568f6cc8433877fb71dd7d36b551854b0bc it's critical, since it makes chip routing initialisation to fail.

---
 sound/soc/codecs/wm8750.c |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)
sound/soc/codecs/wm8750.c +1 -0
index 2e71394..c6a8edf 100644
@@ -350,6 +350,7 @@ static const struct snd_soc_dapm_widget wm8750_dapm_widgets[] = {
 	SND_SOC_DAPM_OUTPUT("ROUT2"),
 	SND_SOC_DAPM_OUTPUT("MONO1"),
 	SND_SOC_DAPM_OUTPUT("OUT3"),
+	SND_SOC_DAPM_OUTPUT("VREF"),
 
 	SND_SOC_DAPM_INPUT("LINPUT1"),
 	SND_SOC_DAPM_INPUT("LINPUT2"),
Signature · 1 line
1.5.6.3