4xx: Add fdt support for VOM405 boards
PATCH 1/4 4xx: Add fdt support for VOM405 boards
From: Matthias Fuchs <[email protected]>
--- include/configs/VOM405.h | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-)
include/configs/VOM405.h +2 -0
@@ -87,6 +87,8 @@#define CONFIG_CMD_PING #define CONFIG_CMD_EEPROM +#define CONFIG_OF_LIBFDT +#define CONFIG_OF_BOARD_SETUP #undef CONFIG_WATCHDOG/* watchdog disabled */
Signature · 1 line
1.5.3
PATCH 2/4 4xx: Cleanup VOM405 linker script
From: Matthias Fuchs <[email protected]>
--- board/esd/vom405/u-boot.lds | 12 ------------ 1 files changed, 0 insertions(+), 12 deletions(-)
board/esd/vom405/u-boot.lds +0 -12
@@ -61,18 +61,6 @@ SECTIONS /* the sector layout of our flash chips! XXX FIXME XXX */ cpu/ppc4xx/start.o (.text) - cpu/ppc4xx/traps.o (.text) - cpu/ppc4xx/interrupts.o (.text) - cpu/ppc4xx/4xx_uart.o (.text) - cpu/ppc4xx/cpu_init.o (.text) - cpu/ppc4xx/speed.o (.text) - common/dlmalloc.o (.text) - lib_generic/crc32.o (.text) - lib_ppc/extable.o (.text) - lib_generic/zlib.o (.text) - -/* . = env_offset;*/ -/* common/environment.o(.text)*/ *(.text) *(.fixup)
Signature · 1 line
1.5.3
PATCH 3/4 4xx: Remove obsolete initdram() function from VOM405 board
From: Matthias Fuchs <[email protected]>
This patch removed the obsolete initdram() function from VOM405 platform file.
Some minor cleanup.
--- board/esd/vom405/vom405.c | 25 ------------------------- 1 files changed, 0 insertions(+), 25 deletions(-)
board/esd/vom405/vom405.c +0 -25
@@ -37,7 +37,6 @@ const unsigned char fpgadata[] = };int filesize =sizeof (fpgadata); -int board_early_init_f (void ) {/*
@@ -76,9 +75,6 @@ int board_early_init_f (void)return 0 ; } - -/* ------------------------------------------------------------------------- */ -int misc_init_r (void ) {/* adjust flash start and offset */
@@ -88,11 +84,9 @@ int misc_init_r (void)return (0 ); } -/* * Check Board Identity: */ -int checkboard (void ) {char str[64 ];
@@ -127,25 +121,6 @@ int checkboard (void)return 0 ; } -/* ------------------------------------------------------------------------- */ - -phys_size_t initdram (int board_type) -{ -unsigned long val; - -mtdcr (memcfga, mem_mb0cf); - val =mfdcr (memcfgd); - -#if 0 -printf ("\nmb0cf=%x\n" , val);/* test-only */ -printf ("strap=%x\n" ,mfdcr (strap));/* test-only */ -#endif - -return (4 *1024 *1024 << ((val &0x000e0000 ) >>17 )); -} - -/* ------------------------------------------------------------------------- */ -void reset_phy (void ) {#ifdef CONFIG_LXT971_NO_SLEEP
Signature · 1 line
1.5.3
PATCH 4/4 4xx: Update VOM405 board configuration
From: Matthias Fuchs <[email protected]>
- remove PCI code
- add command line editing
- minor cleanup
--- include/configs/VOM405.h | 52 ++++++++-------------------------------------- 1 files changed, 9 insertions(+), 43 deletions(-)
include/configs/VOM405.h +9 -43
@@ -24,7 +24,6 @@/* * board/config.h - configuration options, board specific */ -#ifndef __CONFIG_H#define __CONFIG_H
@@ -32,7 +31,6 @@* High Level Configuration Options * (easy to change) */ -#define CONFIG_405EP 1/* This is a PPC405 CPU */ #define CONFIG_4xx 1/* ...member of PPC4xx family */ #define CONFIG_VOM405 1/* ...on a VOM405 board */
@@ -71,7 +69,6 @@#define CONFIG_BOOTP_DNS2 #define CONFIG_BOOTP_SEND_HOSTNAME -/* * Command line configuration. */
@@ -79,7 +76,6 @@#define CONFIG_CMD_DHCP #define CONFIG_CMD_BSP -#define CONFIG_CMD_PCI #define CONFIG_CMD_IRQ #define CONFIG_CMD_ELF #define CONFIG_CMD_I2C
@@ -138,44 +134,20 @@#define CFG_HZ 1000/* decrementer freq: 1 ms ticks */ +#define CONFIG_CMDLINE_EDITING 1/* add command line history */ #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_VERSION_VARIABLE 1/* include version env variable */ #define CFG_RX_ETH_BUFFER 16/* use 16 rx buffer on 405 emac */ -/*----------------------------------------------------------------------- -* PCI stuff -*----------------------------------------------------------------------- -*/ -#define PCI_HOST_ADAPTER 0/* configure as pci adapter */ -#define PCI_HOST_FORCE 1/* configure as pci host */ -#define PCI_HOST_AUTO 2/* detected via arbiter enable */ - -#define CONFIG_PCI /* include pci support */ -#define CONFIG_PCI_HOST PCI_HOST_HOST/* select pci host function */ -#undef CONFIG_PCI_PNP/* do pci plug-and-play */ -/* resource configuration */ - -#undef CONFIG_PCI_SCAN_SHOW/* print pci devices @ startup */ - -#define CFG_PCI_SUBSYS_VENDORID 0x12FE/* PCI Vendor ID: esd gmbh */ -#define CFG_PCI_SUBSYS_DEVICEID 0x0405/* PCI Device ID: CPCI-405 */ -#define CFG_PCI_CLASSCODE 0x0b20/* PCI Class Code: Processor/PPC*/ -#define CFG_PCI_PTM1LA 0x00000000/* point to sdram */ -#define CFG_PCI_PTM1MS 0xfc000001/* 64MB, enable hard-wired to 1 */ -#define CFG_PCI_PTM1PCI 0x00000000/* Host: use this pci address */ -#define CFG_PCI_PTM2LA 0xffc00000/* point to flash */ -#define CFG_PCI_PTM2MS 0xffc00001/* 4MB, enable */ -#define CFG_PCI_PTM2PCI 0x04000000/* Host: use this pci address */ -/* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ #define CFG_BOOTMAPSZ (8 << 20)/* Initial Memory map for Linux */ -/*----------------------------------------------------------------------- +/* * FLASH organization */ #define FLASH_BASE0_PRELIM 0xFFC00000/* FLASH bank #0 */
@@ -199,12 +171,7 @@#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ -#if 0 /* test-only */ -#define CFG_JFFS2_FIRST_BANK 0/* use for JFFS2 */ -#define CFG_JFFS2_NUM_BANKS 1/* ! second bank contains U-Boot */ -#endif - -/*----------------------------------------------------------------------- +/* * Start addresses for the final memory configuration * (Set up by the startup code) * Please note that CFG_SDRAM_BASE _must_ start@0
@@ -221,7 +188,7 @@# undef CFG_RAMBOOT#endif -/*----------------------------------------------------------------------- +/* * Environment Variable setup */ #define CFG_ENV_IS_IN_EEPROM 1/* use EEPROM for environment vars */
@@ -232,7 +199,7 @@#define CFG_NVRAM_BASE_ADDR 0xF0000500/* NVRAM base address */ #define CFG_NVRAM_SIZE 242/* NVRAM size */ -/*----------------------------------------------------------------------- +/* * I2C EEPROM (CAT24WC16) for environment */ #define CONFIG_HARD_I2C /* I2c with hardware support */
@@ -249,10 +216,9 @@#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10/* and takes up to 10 msec */ #define CFG_EEPROM_PAGE_WRITE_ENABLE -/*----------------------------------------------------------------------- +/* * External Bus Controller (EBC) Setup */ -#define CAN_BA 0xF0000000/* CAN Base Address */ /* Memory Bank 0 (Flash Bank 0, NOR-FLASH) initialization */
@@ -263,7 +229,7 @@#define CFG_EBC_PB2AP 0x010053C0/* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */ #define CFG_EBC_PB2CR 0xF0018000/* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit */ -/*----------------------------------------------------------------------- +/* * FPGA stuff */ #define CFG_FPGA_XC95XL 1/* using Xilinx XC95XL CPLD */
@@ -276,7 +242,7 @@#define CFG_FPGA_INIT 0x00010000/* unused (ppc input) */ #define CFG_FPGA_DONE 0x00008000/* JTAG TDI->TDO pin (ppc input) */ -/*----------------------------------------------------------------------- +/* * Definitions for initial stack pointer and data area (in data cache) */ /* use on chip memory ( OCM ) for temperary stack until sdram is tested */
@@ -292,7 +258,7 @@#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET -/*----------------------------------------------------------------------- +/* * Definitions for GPIO setup (PPC405EP specific) * * GPIO0[0] - External Bus Controller BLAST output
Signature · 1 line
1.5.3
PATCH 1/4 4xx: Add fdt support for VOM405 boards
In reply to matthias.fuchs at esd-electronics.comQuoted 1 line · matthias.fuchs at esd-electronics.com
From: Matthias Fuchs <[email protected]>
All [1...4] applied to u-boot-ppc4xx. Thanks.
Best regards,
Stefan
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================