ppc4xx: Fix zeus (405EP) board port
PATCH 1/1 ppc4xx: Fix zeus (405EP) board port
This patch fixes a problem with the SDRAM initialization of the zeus board port. It also enable the FDT support to support booting arch/powerpc Linux kernel versions.
Signed-off-by Stefan Roese <[email protected]>
--- board/zeus/zeus.c | 23 ----------------------- cpu/ppc4xx/sdram.c | 14 ++++++++++---- include/configs/zeus.h | 6 ++++++ 3 files changed, 16 insertions(+), 27 deletions(-)
board/zeus/zeus.c +0 -23
@@ -190,29 +190,6 @@ int checkboard(void)return (0 ); } -static u32 detect_sdram_size (void ) -{ -u32 val; -u32 size; - -mfsdram (mem_mb0cf, val); - size = (4 <<20 ) << ((val &0x000e0000 ) >>17 ); - -/* -* Check if 2nd bank is enabled too -*/ -mfsdram (mem_mb1cf, val); -if (val &1 ) - size += (4 <<20 ) << ((val &0x000e0000 ) >>17 ); - -return size; -} - -phys_size_t initdram (int board_type) -{ -return detect_sdram_size (); -} -static int default_env_var (char *buf,char *var) {char *ptr;
cpu/ppc4xx/sdram.c +10 -4
@@ -209,15 +209,15 @@ phys_size_t initdram(int board_type)udelay (10000 );if (get_ram_size (0 , mb0cf[i].size) == mb0cf[i].size) { +phys_size_t size = mb0cf[i].size; +/* * OK, size detected. Enable second bank if * defined (assumes same type as bank 0) */ #ifdef CONFIG_SDRAM_BANK1 -u32 b1cr = mb0cf[i].size | mb0cf[i].reg; -mtsdram (mem_mcopt1,0x00000000 ); -mtsdram (mem_mb1cf, b1cr);/* SDRAM0_B1CR */ +mtsdram (mem_mb1cf, mb0cf[i].size | mb0cf[i].reg);mtsdram (mem_mcopt1,0x80800000 );udelay (10000 );
@@ -230,13 +230,19 @@ phys_size_t initdram(int board_type) mb0cf[i].size) { mtsdram(mem_mb1cf, 0); mtsdram(mem_mcopt1, 0); + } else { +/* +* We have two identical banks, so the size +* is twice the bank size +*/ + size =2 * size; }#endif /* * OK, size detected -> all done */ -return mb0cf[i].size; +return size; } }
include/configs/zeus.h +6 -0
@@ -309,6 +309,12 @@#define CONFIG_KGDB_SER_INDEX 2/* which serial port to use */ #endif +/* +* Pass open firmware flat tree +*/ +#define CONFIG_OF_LIBFDT +#define CONFIG_OF_BOARD_SETUP +/* ENVIRONMENT VARS */ #define CONFIG_PREBOOT "echo;echo Welcome to Bulletendpoints board v1.1;echo"
Signature · 1 line
1.5.6.5