how do i get the bt878 driver to show and xc-3028 on 2.6.26-gentoo
Hi all
Quoted 1 line
From what I understand I should now be able to get both my Fusion HDTV
lite and Fusion Digital Express (cx23885 with xc-3028) to work from in-kernel drivers and not use the mercurial tree.
Firstly I can't get the bt-878 driver for the lite card to show... I know I've done this along time ago, but just can't remember...
Also I've seen some discussion about the xc3028-dvico-au-01.fw and it's compatibility with 2.6.26 but can't see an answer as to whether it works or not... any definitive answer or do need to download new firmware from somewhere?
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Okay ..
It seems I had no trouble with the bt-878... but the xc3028 version of the fusion dual express doesn't seem to be in the kernel (not listed in the compatible cards)...
I'm going back to mercurial now.
cheers
Allan
Quoted 16 lines · allan k
Hi all
Quoted 1 line
From what I understand I should now be able to get both my Fusion HDTV
lite and Fusion Digital Express (cx23885 with xc-3028) to work from in-kernel drivers and not use the mercurial tree.
Firstly I can't get the bt-878 driver for the lite card to show... I know I've done this along time ago, but just can't remember...
Also I've seen some discussion about the xc3028-dvico-au-01.fw and it's compatibility with 2.6.26 but can't see an answer as to whether it works or not... any definitive answer or do need to download new firmware from somewhere?
Quoted 4 lines
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Sorry
I've answered my own questions had to grab the more generic xc3028-v27.fw to make the card work on the standard v4l-dvb tree to work.
Would be nice for the analog part to work in Mythtv (maybe it works in other software) especially the composite input (I guess this is on the xc2028 part of the card) to encode all my old VHS tapes.
cheers
Allan
Quoted 34 lines · allan k
Okay ..
It seems I had no trouble with the bt-878... but the xc3028 version of the fusion dual express doesn't seem to be in the kernel (not listed in the compatible cards)...
I'm going back to mercurial now.
cheers
Allan
Quoted 16 lines · allan k
Hi all
Quoted 1 line
From what I understand I should now be able to get both my Fusion HDTV
lite and Fusion Digital Express (cx23885 with xc-3028) to work from in-kernel drivers and not use the mercurial tree.
Firstly I can't get the bt-878 driver for the lite card to show... I know I've done this along time ago, but just can't remember...
Also I've seen some discussion about the xc3028-dvico-au-01.fw and it's compatibility with 2.6.26 but can't see an answer as to whether it works or not... any definitive answer or do need to download new firmware from somewhere?
Quoted 4 lines
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Quoted 4 lines
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb