can't get a Jabra BT125 working
Hi,
I was hoping that the 2.6.27 kernel that is being packaged with Ubuntu's Intrepid release which also includes Bluez 3.36 would be a lot better in terms of trying to get this headset working but alas, it seems to be (i.e. not) working as well as it did 9 months ago. :-(
Maybe somebody can help me get this thing working. I'm trying to use it in a Gnome environment along with the Gnome Bluetooth Applet 0.25. I think I have been successful at some point in pairing this device as the applet did ask for the passphrase at some point. It does not seem to ask any more so I presume it's being cached some where.
Here's some of the info which I've kind of discovered I have to gather:
$ hcitool info 00:1A:45:1B:19:89
Requesting information ...
BD Address: 00:1A:45:1B:19:89
Device Name: Jabra BT125
LMP Version: 2.0 (0x3) LMP Subversion: 0x978
Manufacturer: Cambridge Silicon Radio (10)
Features: 0xfc 0xfe 0x0b 0x00 0x08 0x08 0x00 0x00
<encryption> <slot offset> <timing accuracy> <role switch>
<hold mode> <sniff mode> <RSSI> <channel quality> <SCO link>
<HV2 packets> <HV3 packets> <u-law log> <A-law log> <CVSD>
<paging scheme> <transparent SCO> <AFH cap. slave>
<AFH cap. master>
$ hcitool conn
Connections:
> ACL 00:1A:45:1B:19:89 handle 11 state 1 lm MASTER AUTH ENCRYPT SECURE
$ hciconfig -a
hci0: Type: USB
BD Address: 00:0D:18:01:3B:9B ACL MTU: 1017:8 SCO MTU: 64:0
UP RUNNING PSCAN ISCAN
RX bytes:1785565 acl:222 sco:34651 events:453 errors:2
TX bytes:6067 acl:211 sco:0 commands:190 errors:0
Features: 0xff 0xff 0x8d 0xfe 0x9b 0xf9 0x00 0x80
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
Name: 'pc-0'
Class: 0x080104
Service Classes: Capturing
Device Class: Computer, Desktop workstation
HCI Ver: 2.0 (0x3) HCI Rev: 0x4000 LMP Ver: 2.0 (0x3) LMP Subver: 0x430e
Manufacturer: Broadcom Corporation (15)
$ cat ~/.asoundrc
pcm.bluetooth {
type bluetooth
device 00:1A:45:1B:19:89
profile "auto" #optional, supported profiles are: auto, hifi and voice
}
$ aplay -D bluetooth -f S16_LE sample.wav
Playing WAVE '/mnt/mp3/bad_mouth.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo
aplay: set_params:959: Channels count non availableAnyone have any advise on how to get this thing working (reliably)?
Thanx much!
b.
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Quoted 7 lines · Brian J. Murrell
Hi,
I was hoping that the 2.6.27 kernel that is being packaged with Ubuntu's Intrepid release which also includes Bluez 3.36 would be a lot better in terms of trying to get this headset working but alas, it seems to be (i.e. not) working as well as it did 9 months ago. :-(
Quoted 5 lines
Maybe somebody can help me get this thing working. I'm trying to use it in a Gnome environment along with the Gnome Bluetooth Applet 0.25. I think I have been successful at some point in pairing this device as the applet did ask for the passphrase at some point. It does not seem to ask any more so I presume it's being cached some where.
/var/lib/bluetooth/ (slackware)
Quoted 44 lines
Here's some of the info which I've kind of discovered I have to gather:
$ hcitool info 00:1A:45:1B:19:89 Requesting information ... BD Address: 00:1A:45:1B:19:89 Device Name: Jabra BT125 LMP Version: 2.0 (0x3) LMP Subversion: 0x978 Manufacturer: Cambridge Silicon Radio (10) Features: 0xfc 0xfe 0x0b 0x00 0x08 0x08 0x00 0x00 <encryption> <slot offset> <timing accuracy> <role switch> <hold mode> <sniff mode> <RSSI> <channel quality> <SCO link> <HV2 packets> <HV3 packets> <u-law log> <A-law log> <CVSD> <paging scheme> <transparent SCO> <AFH cap. slave> <AFH cap. master> $ hcitool conn Connections: > ACL 00:1A:45:1B:19:89 handle 11 state 1 lm MASTER AUTH ENCRYPT SECURE $ hciconfig -a hci0: Type: USB BD Address: 00:0D:18:01:3B:9B ACL MTU: 1017:8 SCO MTU: 64:0 UP RUNNING PSCAN ISCAN RX bytes:1785565 acl:222 sco:34651 events:453 errors:2 TX bytes:6067 acl:211 sco:0 commands:190 errors:0 Features: 0xff 0xff 0x8d 0xfe 0x9b 0xf9 0x00 0x80 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH HOLD SNIFF PARK Link mode: SLAVE ACCEPT Name: 'pc-0' Class: 0x080104 Service Classes: Capturing Device Class: Computer, Desktop workstation HCI Ver: 2.0 (0x3) HCI Rev: 0x4000 LMP Ver: 2.0 (0x3) LMP Subver: 0x430e Manufacturer: Broadcom Corporation (15) $ cat ~/.asoundrc pcm.bluetooth { type bluetooth device 00:1A:45:1B:19:89 profile "auto" #optional, supported profiles are: auto, hifi and voice } $ aplay -D bluetooth -f S16_LE sample.wav Playing WAVE '/mnt/mp3/bad_mouth.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo aplay: set_params:959: Channels count non available
Quoted 5 lines
Anyone have any advise on how to get this thing working (reliably)?
Thanx much!
b.
I have the same device and the same problem :/ in slackware 12.1 (bluez 3.26). Please email to me if you will reach results.
p.s. Make sure that the value 'Autostart' in /etc/bluetooth/audio.service set to 'true' (not 'false')
Signature · 1 line
Murat D. Kadirov
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users