b43: remove remaining b43_radio_{read|write}16 from main.c

The 16 is not necessary anymore and is defnined to read/write.

Signed-off-by Harvey Harrison <[email protected]>

---
 drivers/net/wireless/b43/main.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

drivers/net/wireless/b43/main.c +1 -1

index 6df9b65..cc1f4a9 100644
@@ -789,7 +789,7 @@ void b43_dummy_transmission(struct b43_wldev *dev)
 	b43_write16(dev, 0x0502, 0x0030);
 
 	if (phy->radio_ver == 0x2050 && phy->radio_rev <= 0x5)
-		b43_radio_write16(dev, 0x0051, 0x0017);
+		b43_radio_write(dev, 0x0051, 0x0017);
 	for (i = 0x00; i < max_loop; i++) {
 		value = b43_read16(dev, 0x050E);
 		if (value & 0x0080)

Quoted 27 lines · Harvey Harrison

The 16 is not necessary anymore and is defnined to read/write.

Signed-off-by Harvey Harrison <[email protected]>

---
 drivers/net/wireless/b43/main.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

drivers/net/wireless/b43/main.c +2 -2

index 6df9b65..cc1f4a9 100644
@@ -789,7 +789,7 @@ void b43_dummy_transmission(struct b43_wldev *dev)
 	b43_write16(dev, 0x0502, 0x0030);
 
 	if (phy->radio_ver == 0x2050 && phy->radio_rev <= 0x5)
-		b43_radio_write16(dev, 0x0051, 0x0017);
+		b43_radio_write(dev, 0x0051, 0x0017);
 	for (i = 0x00; i < max_loop; i++) {
 		value = b43_read16(dev, 0x050E);
 		if (value & 0x0080)

@@ -809,7 +809,7 @@ void b43_dummy_transmission(struct b43_wldev *dev)
 		udelay(10);
 	}
 	if (phy->radio_ver == 0x2050 && phy->radio_rev <= 0x5)
-		b43_radio_write16(dev, 0x0051, 0x0037);
+		b43_radio_write(dev, 0x0051, 0x0037);
 

drivers/net/wireless/b43/main.c void b43_dummy_transmission(struct b43_wldev *dev) · line 815

Quoted 2 lines

drivers/net/wireless/b43/main.c +0 -0

 	write_unlock(&wl->tx_lock);
 	spin_unlock_irq(&wl->irq_lock);

NACK. The two extra characters are absolutely harmless, but they do contain useful information. In addition, who knows if a future Broadcom device starts using 32-bit read/writes.