Problem with flash on a MPC5200B board

Hy Sylvain,

I have a custom Lite5200B based board with two S29GL128 expansion flash in two banks (CS0/CSBOOT, CS1) in 8 bit mode.
This is my flash configuration in my config/<board.h> file. AFAIK the U-Boot CFI driver detects the flash chip mode, so the configuration is quite simple.

#define CFG_MAX_FLASH_SECT 512 /* max num of sects on one chip
*/

#define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms)
*/
#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms)
*/

#define CFG_FLASH_CFI_DRIVER
#define CFG_FLASH_CFI
#define CFG_FLASH_USE_BUFFER_WRITE

The chip select configuration register of both banks could be important.

#define CFG_BOOTCS_CFG 0x00021800
#define CFG_CS1_CFG 0x00021800

Best regards,
Txema