10-17-2008 Build issues - Intel 3945abg - Ubuntu Intrepid
Hello-
Used your driver package in Ubuntu Hardy with no trouble at all. Testing the Intrepid beta now. Before today, using the compat-wireless driver for kernel 2.6.27, networkmanager showed all devices grayed out and iwlist scan would not work. Today's driver release has allowed me to connect, but still drops the connection with intel 2945abg. Also, it causes the touchpad to lose sync when the connection is dropped.
Here is a pastebin containing some dmesg info that might be helpful.
Thanks,
Signature · 7 lines
-- Myk Robinson Computer Support Specialist Kingdom Computer Solutions http://www.kingdomcomputer.info [email protected] (731) 616.5030
Quoted 5 lines · Myk Robinson
Hello-
Used your driver package in Ubuntu Hardy with no trouble at all. Testing the Intrepid beta now. Before today, using the compat-wireless driver for kernel 2.6.27, networkmanager showed all devices grayed out and
Hmm, what do you mean by "grayed out"? What exactly did the menu say?
Dan
Quoted 10 lines
iwlist scan would not work. Today's driver release has allowed me to connect, but still drops the connection with intel 2945abg. Also, it causes the touchpad to lose sync when the connection is dropped.
Here is a pastebin containing some dmesg info that might be helpful.
Thanks,
Quoted 9 lines · Myk Robinson
Hello-
Used your driver package in Ubuntu Hardy with no trouble at all. Testing the Intrepid beta now. Before today, using the compat-wireless driver for kernel 2.6.27, networkmanager showed all devices grayed out and iwlist scan would not work. Today's driver release has allowed me to connect, but still drops the connection with intel 2945abg. Also, it causes the touchpad to lose sync when the connection is dropped.
Quoted 4 lines
Here is a pastebin containing some dmesg info that might be helpful.
The log shows some firmware errors. Could you please follow the steps on
http://intellinuxwireless.org/?n=fw_error_report to help us find the cause of the problem?
Thanks
Reinette
Hi, thanks for the response.
The NetworkManager applet in the task bar positively identified both my wireless devices. The Intel 3945abg and the secondary Belkin FD7050 USB wireless, but both were "grayed out", or unselectable. No wireless
networks were shown. When this happened, running sudo lshw -C network
in the console showed the wireless devices as "disabled", which explains the grayed out part.. Just not sure why they were disabled and couldnt figure how to enable them.
Also, when this occurred, trying to check by console with sudo
iwlist wlan0 scan yielded no results whatsoever. No error, no positive
results. The cursor just sat there blinking until I pressed Ctrl+C to stop the process from running any further.
Immediately following this event, uninstalling the compat-wireless driver and reverting back to the "out of the box" driver provided with the distro allowed the connection to take place, but with regular dropped connections.
Thanks,
Signature · 7 lines
-- Myk Robinson Computer Support Specialist Kingdom Computer Solutions http://www.kingdomcomputer.info [email protected] (731) 616.5030
Quoted 22 lines · Dan Williams
Quoted 5 lines · Myk Robinson
Hello-
Used your driver package in Ubuntu Hardy with no trouble at all. Testing the Intrepid beta now. Before today, using the compat-wireless driver for kernel 2.6.27, networkmanager showed all devices grayed out and
Hmm, what do you mean by "grayed out"? What exactly did the menu say?
Dan
Quoted 10 lines
iwlist scan would not work. Today's driver release has allowed me to connect, but still drops the connection with intel 2945abg. Also, it causes the touchpad to lose sync when the connection is dropped.
Here is a pastebin containing some dmesg info that might be helpful.
Thanks,
Quoted 16 lines · reinette chatre
Quoted 5 lines · Myk Robinson
Sure will
Just curious, what can you tell me about the dmesg I posted? I don't understand much of it, that is just what I have learned to run right after stuff happens :)
The log shows that the driver is loaded/unloaded a couple of times - probably by
wpa_supplicant. The details surrounding the error will become clear when we get more debugging.Quoted 3 lines
As for the module, can you tell me how to autoload it with those parameters? Or should i jsut upon booting rmmod the module then reload it with your suggested parameters?
Quoted 5 lines
You could ask modprobe to load the module with parameters. perhaps in
/etc/modprobe.d/options. You could also use the rmmod/modprobe after system reboot as you suggested.Reinette
Here is some more output from dmesg with the module parameters loaded. SOrry if there is some output that you don't need in there too.
Signature · 7 lines
-- Myk Robinson Computer Support Specialist Kingdom Computer Solutions http://www.kingdomcomputer.info [email protected] (731) 616.5030
Here is a dmesg log using the 10-18-2008 build on a Gateway M-6881 laptop with the intel 3945abg wifi.
I hope this helps get it sorted out. In the meantime, I will compile today's build and see what happens.
THanks,
Signature · 7 lines
-- Myk Robinson Computer Support Specialist Kingdom Computer Solutions http://www.kingdomcomputer.info [email protected] (731) 616.5030
Quoted 23 lines · reinette chatre
Quoted 9 lines · Myk Robinson
Hello-
Used your driver package in Ubuntu Hardy with no trouble at all. Testing the Intrepid beta now. Before today, using the compat-wireless driver for kernel 2.6.27, networkmanager showed all devices grayed out and iwlist scan would not work. Today's driver release has allowed me to connect, but still drops the connection with intel 2945abg. Also, it causes the touchpad to lose sync when the connection is dropped.
Quoted 4 lines
Here is a pastebin containing some dmesg info that might be helpful.
The log shows some firmware errors. Could you please follow the steps on
http://intellinuxwireless.org/?n=fw_error_report to help us find the cause of the problem?Thanks
Reinette
Quoted 21 lines · Myk Robinson
Quoted 20 lines · reinette chatre
Quoted 5 lines · Myk Robinson
Sure will
Just curious, what can you tell me about the dmesg I posted? I don't understand much of it, that is just what I have learned to run right after stuff happens :)
The log shows that the driver is loaded/unloaded a couple of times - probably by
wpa_supplicant. The details surrounding the error will become clear when we get more debugging.Quoted 3 lines
As for the module, can you tell me how to autoload it with those parameters? Or should i jsut upon booting rmmod the module then reload it with your suggested parameters?
You could ask modprobe to load the module with parameters. perhaps in
/etc/modprobe.d/options. You could also use the rmmod/modprobe after system reboot as you suggested.
Quoted 6 lines
Quoted 1 line
Reinette
Here is some more output from dmesg with the module parameters loaded. SOrry if there is some output that you don't need in there too.
Your driver is not compiled with debugging support.Could you please recompile the driver to support debugging (CONFIG_IWL3945_DEBUG) and rerun your test?
Thank you
Reinette