Skip to contentSkip to conversation

memstick: struct device - replace bus_id with dev_name(), dev_set_name()

PATCH Kay Sievers 1 participant 1 message Oct 30, 2008

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

This patch is part of a larger patch series which will remove the "char bus_id[20]" name string from struct device. The device name is managed in the kobject anyway, and without any size limitation, and just needlessly copied into "struct device".

To set and read the device name dev_name(dev) and dev_set_name(dev) must be used. If your code uses static kobjects, which it shouldn't do, "const char *init_name" can be used to statically provide the name the registered device should have. At registration time, the init_name field is cleared, to enforce the use of dev_name(dev) to access the device name at a later time.

We need to get rid of all occurrences of bus_id in the entire tree to be able to enable the new interface. Please apply this patch, and possibly convert any remaining remaining occurrences of bus_id.

We want to submit a patch to -next, which will remove bus_id from "struct device", to find the remaining pieces to convert, and finally switch over to the new api, which will remove the 20 bytes array and does no longer have a size limitation.

Thanks,
Kay

From: Kay Sievers <[email protected]>
Subject: memstick: struct device - replace bus_id with dev_name(), dev_set_name()

---

drivers/memstick/core/memstick.c +2 -3
index cea4690..a5b448e 100644
@@ -385,8 +385,7 @@ static struct memstick_dev *memstick_alloc_card(struct memstick_host *host)
 
 	if (card) {
 		card->host = host;
-		snprintf(card->dev.bus_id, sizeof(card->dev.bus_id),
-			 "%s", host->dev.bus_id);
+		dev_set_name(&card->dev, "%s", dev_name(&host->dev));
 		card->dev.parent = &host->dev;
 		card->dev.bus = &memstick_bus_type;
 		card->dev.release = memstick_free_card;
@@ -519,7 +518,7 @@ int memstick_add_host(struct memstick_host *host)
 	if (rc)
 		return rc;
 
-	snprintf(host->dev.bus_id, BUS_ID_SIZE, "memstick%u", host->id);
+	dev_set_name(&host->dev, "memstick%u", host->id);
 
 	rc = device_add(&host->dev);
 	if (rc) {
drivers/memstick/core/mspro_block.c +7 -7
index 7911151..1f1e398 100644
@@ -887,14 +887,14 @@ try_again:
 	if (rc) {
 		printk(KERN_WARNING
 		       "%s: could not switch to 4-bit mode, error %d\n",
-		       card->dev.bus_id, rc);
+		       dev_name(&card->dev), rc);
 		return 0;
 	}
 
 	msb->system = MEMSTICK_SYS_PAR4;
 	host->set_param(host, MEMSTICK_INTERFACE, MEMSTICK_PAR4);
 	printk(KERN_INFO "%s: switching to 4-bit parallel mode\n",
-	       card->dev.bus_id);
+	       dev_name(&card->dev));
 
 	if (msb->caps & MEMSTICK_CAP_PAR8) {
 		rc = mspro_block_set_interface(card, MEMSTICK_SYS_PAR8);
@@ -905,11 +905,11 @@ try_again:
 					MEMSTICK_PAR8);
 			printk(KERN_INFO
 			       "%s: switching to 8-bit parallel mode\n",
-			       card->dev.bus_id);
+			       dev_name(&card->dev));
 		} else
 			printk(KERN_WARNING
 			       "%s: could not switch to 8-bit mode, error %d\n",
-			       card->dev.bus_id, rc);
+			       dev_name(&card->dev), rc);
 	}
 
 	card->next_request = h_mspro_block_req_init;
@@ -922,7 +922,7 @@ try_again:
 	if (rc) {
 		printk(KERN_WARNING
 		       "%s: interface error, trying to fall back to serial\n",
-		       card->dev.bus_id);
+		       dev_name(&card->dev));
 		msb->system = MEMSTICK_SYS_SERIAL;
 		host->set_param(host, MEMSTICK_POWER, MEMSTICK_POWER_OFF);
 		msleep(10);
@@ -992,14 +992,14 @@ static int mspro_block_read_attributes(struct memstick_dev *card)
 
 	if (be16_to_cpu(attr->signature) != MSPRO_BLOCK_SIGNATURE) {
 		printk(KERN_ERR "%s: unrecognized device signature %x\n",
-		       card->dev.bus_id, be16_to_cpu(attr->signature));
+		       dev_name(&card->dev), be16_to_cpu(attr->signature));
 		rc = -ENODEV;
 		goto out_free_attr;
 	}
 
 	if (attr->count > MSPRO_BLOCK_MAX_ATTRIBUTES) {
 		printk(KERN_WARNING "%s: way too many attribute entries\n",
-		       card->dev.bus_id);
+		       dev_name(&card->dev));
 		attr_count = MSPRO_BLOCK_MAX_ATTRIBUTES;
 	} else
 		attr_count = attr->count;
drivers/memstick/host/tifm_ms.c +2 -2
index d32d6ad..03f71a4 100644
@@ -546,7 +546,7 @@ static void tifm_ms_abort(unsigned long data)
 	printk(KERN_ERR
 	       "%s : card failed to respond for a long period of time "
 	       "(%x, %x)\n",
-	       host->dev->dev.bus_id, host->req ? host->req->tpc : 0,
+	       dev_name(&host->dev->dev), host->req ? host->req->tpc : 0,
 	       host->cmd_flags);
 
 	tifm_eject(host->dev);
@@ -561,7 +561,7 @@ static int tifm_ms_probe(struct tifm_dev *sock)
 	if (!(TIFM_SOCK_STATE_OCCUPIED
 	      & readl(sock->addr + SOCK_PRESENT_STATE))) {
 		printk(KERN_WARNING "%s : card gone, unexpectedly\n",
-		       sock->dev.bus_id);
+		       dev_name(&sock->dev));
 		return rc;
 	}