Skip to contentSkip to conversation

spi: struct device - replace bus_id with dev_name(), dev_set_name()

PATCH Kay Sievers 2 participants 2 messages Oct 30, 2008 SPI

lore
Share & tools
lore
#0 lore raw

This patch is part of a larger patch series which will remove the "char bus_id[20]" name string from struct device. The device name is managed in the kobject anyway, and without any size limitation, and just needlessly copied into "struct device".

To set and read the device name dev_name(dev) and dev_set_name(dev) must be used. If your code uses static kobjects, which it shouldn't do, "const char *init_name" can be used to statically provide the name the registered device should have. At registration time, the init_name field is cleared, to enforce the use of dev_name(dev) to access the device name at a later time.

We need to get rid of all occurrences of bus_id in the entire tree to be able to enable the new interface. Please apply this patch, and possibly convert any remaining remaining occurrences of bus_id.

We want to submit a patch to -next, which will remove bus_id from "struct device", to find the remaining pieces to convert, and finally switch over to the new api, which will remove the 20 bytes array and does no longer have a size limitation.

Thanks,
Kay

From: Kay Sievers <[email protected]>
Subject: spi: struct device - replace bus_id with dev_name(), dev_set_name()

---

drivers/spi/spi.c +9 -11
index 3734dc9..643908b 100644
@@ -47,7 +47,7 @@ modalias_show(struct device *dev, struct device_attribute *a, char *buf)
 {
 	const struct spi_device	*spi = to_spi_device(dev);
 
-	return snprintf(buf, BUS_ID_SIZE + 1, "%s\n", spi->modalias);
+	return sprintf(buf, "%s\n", spi->modalias);
 }
 
 static struct device_attribute spi_dev_attrs[] = {
@@ -63,7 +63,7 @@ static int spi_match_device(struct device *dev, struct device_driver *drv)
 {
 	const struct spi_device	*spi = to_spi_device(dev);
 
-	return strncmp(spi->modalias, drv->name, BUS_ID_SIZE) == 0;
+	return strcmp(spi->modalias, drv->name) == 0;
 }
 
 static int spi_uevent(struct device *dev, struct kobj_uevent_env *env)
@@ -243,8 +243,7 @@ int spi_add_device(struct spi_device *spi)
 	}
 
 	/* Set the bus ID string */
-	snprintf(spi->dev.bus_id, sizeof spi->dev.bus_id,
-			"%s.%u", spi->master->dev.bus_id,
+	dev_set_name(&spi->dev, "%s.%u", dev_name(&spi->master->dev),
 			spi->chip_select);
 
 
@@ -254,7 +253,7 @@ int spi_add_device(struct spi_device *spi)
 	 */
 	mutex_lock(&spi_add_lock);
 
-	if (bus_find_device_by_name(&spi_bus_type, NULL, spi->dev.bus_id)
+	if (bus_find_device_by_name(&spi_bus_type, NULL, dev_name(&spi->dev))
 			!= NULL) {
 		dev_err(dev, "chipselect %d already in use\n",
 				spi->chip_select);
@@ -269,7 +268,7 @@ int spi_add_device(struct spi_device *spi)
 	status = spi->master->setup(spi);
 	if (status < 0) {
 		dev_err(dev, "can't %s %s, status %d\n",
-				"setup", spi->dev.bus_id, status);
+				"setup", dev_name(&spi->dev), status);
 		goto done;
 	}
 
@@ -277,9 +276,9 @@ int spi_add_device(struct spi_device *spi)
 	status = device_add(&spi->dev);
 	if (status < 0)
 		dev_err(dev, "can't %s %s, status %d\n",
-				"add", spi->dev.bus_id, status);
+				"add", dev_name(&spi->dev), status);
 	else
-		dev_dbg(dev, "registered child %s\n", spi->dev.bus_id);
+		dev_dbg(dev, "registered child %s\n", dev_name(&spi->dev));
 
 done:
 	mutex_unlock(&spi_add_lock);
@@ -504,12 +503,11 @@ int spi_register_master(struct spi_master *master)
 	/* register the device, then userspace will see it.
 	 * registration fails if the bus ID is in use.
 	 */
-	snprintf(master->dev.bus_id, sizeof master->dev.bus_id,
-		"spi%u", master->bus_num);
+	dev_set_name(&master->dev, "spi%u", master->bus_num);
 	status = device_add(&master->dev);
 	if (status < 0)
 		goto done;
-	dev_dbg(dev, "registered master %s%s\n", master->dev.bus_id,
+	dev_dbg(dev, "registered master %s%s\n", dev_name(&master->dev),
 			dynamic ? " (dynamic)" : "");
 
 	/* populate children from any spi device tables */
drivers/spi/spi_bitbang.c +1 -1
index 96cc39e..85e61f4 100644
@@ -475,7 +475,7 @@ int spi_bitbang_start(struct spi_bitbang *bitbang)
 	/* this task is the only thing to touch the SPI bits */
 	bitbang->busy = 0;
 	bitbang->workqueue = create_singlethread_workqueue(
-			bitbang->master->dev.parent->bus_id);
+			dev_name(bitbang->master->dev.parent));
 	if (bitbang->workqueue == NULL) {
 		status = -EBUSY;
 		goto err1;
drivers/spi/spi_butterfly.c +1 -1
index 0ee2b20..c218486 100644
@@ -287,7 +287,7 @@ static void butterfly_attach(struct parport *p)
 	pp->dataflash = spi_new_device(pp->bitbang.master, &pp->info[0]);
 	if (pp->dataflash)
 		pr_debug("%s: dataflash at %s\n", p->name,
-				pp->dataflash->dev.bus_id);
+				dev_name(&pp->dataflash->dev));
 
 	// dev_info(_what?_, ...)
 	pr_info("%s: AVR Butterfly\n", p->name);
drivers/spi/spi_lm70llp.c +1 -1
index 39d8d8a..af65267 100644
@@ -287,7 +287,7 @@ static void spi_lm70llp_attach(struct parport *p)
 	pp->spidev_lm70 = spi_new_device(pp->bitbang.master, &pp->info);
 	if (pp->spidev_lm70)
 		dev_dbg(&pp->spidev_lm70->dev, "spidev_lm70 at %s\n",
-				pp->spidev_lm70->dev.bus_id);
+				dev_name(&pp->spidev_lm70->dev));
 	else {
 		printk(KERN_WARNING "%s: spi_new_device failed\n", DRVNAME);
 		status = -ENODEV;
#1 lore raw
Quoted 6 lines · Kay Sievers

From: Kay Sievers <[email protected]>
Subject: spi: struct device - replace bus_id with dev_name(), dev_set_name()

... OK by me if this goes into 2.6.28. There's one more use of spi->dev.bus_id that I know about, in the spi_gpio driver currently found in the MM tree.