Skip to contentSkip to conversation

AVerMedia TVPhone98/remote control

DISCUSSION Szymon Zygmunt 1 participant 1 message Nov 10, 2008 Media (V4L/DVB)

lore
Share & tools
lore
#0 lore raw

Hi.

I have the identical problem like here:
http://www.spinics.net/lists/vfl/msg15550.html. It's a very old card, but maybe someone has this card and resolved this problem. My dmesg in part about bttv shows:
bttv: driver version 0.9.17 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 2) at 0000:00:09.0, irq: 11, latency: 32, mmio:
0xe9002000
bttv0: detected: AVerMedia TVPhone98 [card=41], PCI subsystem ID is 1461:0001
bttv0: using: AVerMedia TVPhone 98 [card=41,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=008577c3 [init] tuner 1-0061: chip found @ 0xc2 (bt878 #0 [sw])
bttv0: Avermedia eeprom[0x4821]: tuner=5 radio:yes remote control:yes
bttv0: tuner type=5
tuner-simple 1-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
tuner 1-0061: type set to Philips PAL_BG (FI1
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: registered device radio0
bttv0: PLL: 28636363 => 35468950 . ok
input: bttv IR (card=41)
as /devices/pci0000:00/0000:00:09.0/input/input7

Is there any chance to repair it? Maybe it just a small mistake as I think, because remote controll works but inapropriate :).

Thanks in advance.

Signature · 6 lines
Szymon Zygmunt

--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list