AVerTV Hybrid Nanoexpress support

hey,
i would like to ask, whether in near future there will be any driver for the AVerTV Hybrid Nanoexpress.
is there anything i could do to support a potential developer (testing, some data about the card)?
if so please tell me
greetings
martin

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Unless someone happens to be already working on support for it or a near analogue of a device, then no .

A good first start is to identify all the components chips being used on the device -- you can submit a high res photo of the device to the wiki if possible.

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

hello again

gents, i wrote in 96 the first X11 application to drive a radio card in florida ...

so can anyone tell me about spying proramms under windows to reverse engeneer what wintv does ant the drivers

so i can get analog working in linux ?

best regards

_______________________________________

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Hi again,

I missed your earlier thread (
http://marc.info/?l=linux-dvb&m=122530861931653&w=2 ), but as you know from it, this is a cx23885 based device.

There have been a couple reports of success with NTSC analogue with that part I believe. Anyway, read through these two threads which will likely provided some direction:

* http://marc.info/?l=linux-dvb&m=122238944905049&w=2
* http://marc.info/?l=linux-dvb&m=122169029925610&w=2

There is a post from today that might be of interest too:
* http://marc.info/?l=linux-dvb&m=122682215128088&w=2

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

hi

I adde this

        [CX23885_BOARD_HAUPPAUGE_HVR1400] = {
                .name           = "Hauppauge WinTV-HVR1400",
                .porta          = CX23885_ANALOG_VIDEO,
                .portb          = CX23885_MPEG_ENCODER,
                .portc          = CX23885_MPEG_DVB,
                .tuner_type     = TUNER_LG_PAL_NEW_TAPC,
                .input          = {{
                        .type   = CX23885_VMUX_TELEVISION,
                        .vmux   = 0,
                        .gpio0  = 0xff00,
                }, {
                        .type   = CX23885_VMUX_DEBUG,
                        .vmux   = 0,
                        .gpio0  = 0xff01,
                }, {
                        .type   = CX23885_VMUX_COMPOSITE1,
                        .vmux   = 1,
                        .gpio0  = 0xff02,
                }, {
                        .type   = CX23885_VMUX_SVIDEO,
                        .vmux   = 2,
                        .gpio0  = 0xff02,
                } },

        },

"cx23885-cards.c" 674 lignes --25%--
171,22-44 21%

and its still not working, can anyone help ? i does compile ....

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

then i tryed this

[CX23885_BOARD_HAUPPAUGE_HVR1400] = {
                .name           = "Hauppauge WinTV-HVR1400",
                .porta          = CX23885_ANALOG_VIDEO,
                .portc          = CX23885_MPEG_DVB,
                .tuner_type     = TUNER_XC2028,
                .tuner_addr     = 0x61, /* 0xc2 >> 1 */
                .input          = {{
                        .type   = CX23885_VMUX_TELEVISION,
                        .vmux   =       CX25840_VIN7_CH3 |
                                        CX25840_VIN5_CH2 |
                                        CX25840_VIN2_CH1,
                        .gpio0  = 0,
                }, {
                        .type   = CX23885_VMUX_COMPOSITE1,
                        .vmux   =       CX25840_VIN7_CH3 |
                                        CX25840_VIN4_CH2 |
                                        CX25840_VIN6_CH1,
                        .gpio0  = 0,
                }, {
                        .type   = CX23885_VMUX_SVIDEO,
                        .vmux   =       CX25840_VIN7_CH3 |
                                        CX25840_VIN4_CH2 |
                                        CX25840_VIN8_CH1 |
                                        CX25840_SVIDEO_ON,
                        .gpio0  = 0,
                } },

        },

still no luck, firmware loading errors

_______________________________________________
linux-dvb mailing list
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb