Booting the Linux image via nfs

View this message in context: http://www.nabble.com/Booting-the-Linux-image-via-nfs-tf4324309.html#a12314911
Sent from the Uboot - Users mailing list archive at Nabble.com.

DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The faster I go, the behinder I get.                 -- Lewis Carroll

View this message in context: http://www.nabble.com/Booting-the-Linux-image-via-nfs-tf4324309.html#a12347704
Sent from the Uboot - Users mailing list archive at Nabble.com.

=============================================================================
          Miroslaw Dach (Miroslaw.Dach at psi.ch) - SLS/Controls Group 
                PSI - Paul Scherrer Institut CH-5232 Villigen
=============================================================================

=============================================================================
          Miroslaw Dach (Miroslaw.Dach at psi.ch) - SLS/Controls Group 
                PSI - Paul Scherrer Institut CH-5232 Villigen
=============================================================================

DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Bankers do it with interest (penalty for early withdrawal).

DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The goal of science is to build better mousetraps. The goal of nature
is to build better mice.

DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
READ THIS BEFORE OPENING PACKAGE: According to Certain Suggested Ver-
sions of the Grand Unified Theory, the Primary Particles Constituting
this Product May Decay to Nothingness Within the  Next  Four  Hundred
Million Years.

=============================================================================
          Miroslaw Dach (Miroslaw.Dach at psi.ch) - SLS/Controls Group 
                PSI - Paul Scherrer Institut CH-5232 Villigen
=============================================================================
-------------- next part --------------
#ifndef __CONFIG_H
#define __CONFIG_H

/*
#define DEBUG
#define ET_DEBUG 1
*/
/*
 * High Level Configuration Options
 * (easy to change)
 */

#define CONFIG_405     1  /* This is a PPC405 CPU    */
#define CONFIG_4xx     1  /* ...member of PPC4xx family */
#define CONFIG_XILINX_AVNET_FX12   1  /* ...on a Xilinx ML410 board */

#include "../board/xilinx/avnet_fx12/xparameters.h"

/*  Make some configuration choices based on the hardware design
 *  specified in xparameters.h.
 */
#define CFG_ENV_IS_NOWHERE        1       /* no space to store environment */
#define CFG_ENV_SIZE              1024
#define CFG_NO_FLASH              1    /*    no flash */
/* #define CFG_FLASH_BASE                   XPAR_FLASH_2MX16_MEM0_BASEADDR
#define CFG_MAX_FLASH_BANKS              1
#define CFG_MAX_FLASH_SECT        64 */
#define CONFIG_BAUDRATE           9600
#define CONFIG_BOOTDELAY          10       /* autoboot after 0 seconds */
#define CONFIG_BOOTCOMMAND        ""       /* autoboot command  */
#define CONFIG_BOOTARGS           "console=ttyUL0,9600 root=/dev/nfs rw nfsroot=129.117.144.113:/opt/eldk41/ppc_4xx,tcp  ip=::::virtex4-mirek:eth0:dhcp panic=1" /* "root=/dev/ram rw"*/
#define CONFIG_SERVERIP		129.117.144.113
#define CONFIG_IPADDR		129.117.144.157
#define CONFIG_LOADS_ECHO         1       /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE     0       /* don't allow baudrate change */

#define REMOVE_COMMANDS           ( \
 CFG_CMD_FLASH		| \
 CFG_CMD_NET            | \
 CFG_CMD_JFFS2          | \
 CFG_CMD_BDI		| \
 CFG_CMD_LOADS		| \
 CFG_CMD_LOADB		| \
 CFG_CMD_IMI		| \
 CFG_CMD_CACHE		| \
 CFG_CMD_ENV		| \
 CFG_CMD_KGDB		| \
 CFG_CMD_PCMCIA		| \
 CFG_CMD_IDE		| \
 CFG_CMD_PCI		| \
 CFG_CMD_IRQ		| \
 CFG_CMD_CONSOLE	| \
 CFG_CMD_EEPROM		| \
 CFG_CMD_ASKENV		| \
 CFG_CMD_RUN		| \
 CFG_CMD_ECHO		| \
 CFG_CMD_I2C		| \
 CFG_CMD_REGINFO	| \
 CFG_CMD_IMMAP		| \
 CFG_CMD_DATE		| \
 CFG_CMD_DHCP		| \
 CFG_CMD_BEDBUG		| \
 CFG_CMD_FDC		| \
 CFG_CMD_SCSI		| \
 CFG_CMD_AUTOSCRIPT	| \
 CFG_CMD_MII		| \
 CFG_CMD_SETGETDCR	| \
 CFG_CMD_BSP		| \
 CFG_CMD_MISC		| \
 CFG_CMD_USB		| \
 CFG_CMD_DOC		| \
 CFG_CMD_DTT		| \
 CFG_CMD_SDRAM		| \
 CFG_CMD_DIAG		| \
 CFG_CMD_FPGA		| \
 CFG_CMD_HWFLOW		| \
 CFG_CMD_SAVES		| \
 CFG_CMD_SPI		| \
 CFG_CMD_FDOS		| \
 CFG_CMD_VFD		| \
 CFG_CMD_NAND		| \
 CFG_CMD_BMP		| \
 CFG_CMD_PORTIO		| \
 CFG_CMD_PING		| \
 CFG_CMD_MMC		| \
 CFG_CMD_FAT		| \
 CFG_CMD_IMLS		| \
 CFG_CMD_ITEST		| \
 CFG_CMD_REISER		| \
 CFG_CMD_CDP		| \
 CFG_CMD_XIMG		| \
 CFG_CMD_UNIVERSE 	| \
 CFG_CMD_EXT2		| \
 CFG_CMD_SNTP		| \
 CFG_CMD_DISPLAY	  \
)

#define CONFIG_COMMANDS           (CFG_CMD_ALL  & ~REMOVE_COMMANDS)

/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>

/*
 * Miscellaneous configurable options
 */
#define CFG_LONGHELP      /* undef to save memory    */
#define CFG_PROMPT  "=> " /* Monitor Command Prompt  */

#define CFG_CBSIZE  256   /* Console I/O Buffer Size */

#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)   /* Print Buffer Size */
#define CFG_MAXARGS                16 /* max number of command args */
#define CFG_BARGSIZE              CFG_CBSIZE  /* Boot Argument Buffer Size  */

#define CFG_MEMTEST_START         0x0400000   /* memtest works on  */
#define CFG_MEMTEST_END           0x07fffff   /* 4 ... 12 MB in DRAM  */

#define CFG_DUART_CHAN            0
#define CFG_NS16550_REG_SIZE      -4
#define CFG_NS16550               1
#define CFG_INIT_CHAN1            1

/* The following table includes the supported baudrates */
#define CFG_BAUDRATE_TABLE  \
    {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}

#define CFG_LOAD_ADDR             0x400000 /* default load address */
#define CFG_EXTBDINFO             1  /* To use extended board_into (bd_t) */

#define CFG_HZ                    1000  /* decrementer freq: 1 ms ticks */

/*-----------------------------------------------------------------------
 * Start addresses for the final memory configuration
 * (Set up by the startup code)
 * Please note that CFG_SDRAM_BASE _must_ start at 0
 */
#define CFG_SDRAM_BASE            0x00000000
#define CFG_MONITOR_BASE          0x01a00000
#define CFG_MONITOR_LEN           (192 * 1024)   /* Reserve 196 kB for Monitor */
#define CFG_MALLOC_LEN            (128 * 1024)   /* Reserve 128 kB for malloc()   */

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 8 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define CFG_BOOTMAPSZ             (8 << 20)   /* Initial Memory map for Linux */

/*-----------------------------------------------------------------------
 * Cache Configuration
 */
#define CFG_DCACHE_SIZE           8192 /* Virtex-II Pro PPC 405 CPUs */
#define CFG_CACHELINE_SIZE        32 /* ...                 */

/*-----------------------------------------------------------------------
 * Definitions for initial stack pointer and data area (in DPRAM)
 */

#define CFG_INIT_RAM_ADDR         0x1700000  /* inside of SDRAM */
#define CFG_INIT_RAM_END          0x2000     /* End of used area in RAM */
#define CFG_GBL_DATA_SIZE         128     /* size in bytes reserved for initial data */
#define CFG_GBL_DATA_OFFSET      (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET       CFG_GBL_DATA_OFFSET

/*
 * Internal Definitions
 *
 * Boot Flags
 */
#define BOOTFLAG_COLD             0x01  /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM             0x02  /* Software reboot         */

#endif           /* __CONFIG_H */