Add support for OMAP35x processors (v3)
cover Add support for OMAP35x processors (v3)
These patches provide support for the OMAP35x processors.
This is essentially a re-submit after series of discusions earlier in the list. It had always been getting pushed in my to-do list :(
See: http://marc.info/?l=linux-omap&m=122029900603111&w=2
Based on the comments received, this patch includes following:
1) Updates to Kconfig
(Includes the changes suggested by Aguirre Rodriguez)
2) Runtime check for OMAP35x
3) Updates to omap3_evm_defconfig
If the changes look good, I can make updates to Beagle, Overo and Pandora boards as well.
Best regards,
Sanjeev
Sanjeev Premi (3):
Add support for OMAP35x processors
Runitme check for OMAP35x
Updates for OMAP3EVM
arch/arm/configs/omap3_evm_defconfig | 5 ++ arch/arm/mach-omap2/Kconfig | 65 ++++++++++++++++++++-- arch/arm/mach-omap2/board-omap3evm.c | 2 +- arch/arm/plat-omap/common.c | 68 +++++++++++++++++++++++ arch/arm/plat-omap/include/mach/common.h | 1 + arch/arm/plat-omap/include/mach/cpu.h | 88 +++++++++++++++++++++++++++++- 6 files changed, 220 insertions(+), 9 deletions(-)
Quoted 13 lines · Sanjeev Premi
These patches provide support for the OMAP35x processors.
This is essentially a re-submit after series of discusions earlier in the list. It had always been getting pushed in my to-do list :(
See: http://marc.info/?l=linux-omap&m=122029900603111&w=2Based on the comments received, this patch includes following:
1) Updates toKconfig
(Includes the changes suggested by Aguirre Rodriguez)
2) Runtime check for OMAP35x
3) Updates toomap3_evm_defconfig
Quoted 5 lines
If the changes look good, I can make updates to Beagle, Overo and Pandora boards as well.
Best regards,
Sanjeev
Sanjeev,
Is the HEAD of linux-omap working for you on omap3evm? I just got my EVM and am getting it going but it doesn't boot without CONFIG_DEBUG_LL, and with that enabled, as soon as the normal serial driver is enabled, the serial console goes crazy with garbage output.
I'm about to push a new PM branch and wanted to do some testing on the EVM.
Kevin
Quoted 16 lines
Sanjeev Premi (3):
Add support for OMAP35x processors
Runitme check for OMAP35x
Updates for OMAP3EVMarch/arm/configs/omap3_evm_defconfig | 5 ++ arch/arm/mach-omap2/Kconfig | 65 ++++++++++++++++++++-- arch/arm/mach-omap2/board-omap3evm.c | 2 +- arch/arm/plat-omap/common.c | 68 +++++++++++++++++++++++ arch/arm/plat-omap/include/mach/common.h | 1 + arch/arm/plat-omap/include/mach/cpu.h | 88 +++++++++++++++++++++++++++++- 6 files changed, 220 insertions(+), 9 deletions(-)--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Op 13 jan 2009, om 20:41 heeft Kevin Hilman het volgende geschreven:
Quoted 21 lines
Quoted 13 lines · Sanjeev Premi
These patches provide support for the OMAP35x processors.
This is essentially a re-submit after series of discusions earlier in the list. It had always been getting pushed in my to-do list :(
See: http://marc.info/?l=linux-omap&m=122029900603111&w=2Based on the comments received, this patch includes following:
1) Updates toKconfig
(Includes the changes suggested by Aguirre Rodriguez)
2) Runtime check for OMAP35x
3) Updates toomap3_evm_defconfigQuoted 5 lines
If the changes look good, I can make updates to Beagle, Overo and Pandora boards as well.
Best regards,
Sanjeev
Quoted 6 lines
Sanjeev,
Is the HEAD of linux-omap working for you on omap3evm? I just got my EVM and am getting it going but it doesn't boot without
CONFIG_DEBUG_LL, and with that enabled, as soon as the normal serial driver is enabled, the serial console goes crazy with garbage output.
That's indeed the same problem I reported some weeks ago. The console returns to normal when getty starts.
regards,
Koen
Quoted 31 lines
I'm about to push a new PM branch and wanted to do some testing on the EVM.
Kevin
Quoted 14 lines
Sanjeev Premi (3):
Add support for OMAP35x processors
Runitme check for OMAP35x
Updates for OMAP3EVM
arch/arm/configs/omap3_evm_defconfig| 5 ++arch/arm/mach-omap2/Kconfig| 65 ++++++++++++++++++++-- arch/arm/mach-omap2/board-omap3evm.c | 2 +- arch/arm/plat-omap/common.c | 68 +++++++++++++++++++++++
arch/arm/plat-omap/include/mach/common.h| 1 +arch/arm/plat-omap/include/mach/cpu.h| 88 ++++++++++++++++++++
+++++++++-Quoted 5 lines
6 files changed, 220 insertions(+), 9 deletions(-)--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 28 lines
-----Original Message-----
From: Kevin Hilman [mailto:[email protected]]
Sent: Wednesday, January 14, 2009 1:11 AM
To: Premi, Sanjeev
Cc: [email protected]
Subject: Re: [PATCH 0/3] Add support for OMAP35x processors (v3)Quoted 3 lines · Sanjeev Premi
These patches provide support for the OMAP35x processors.
This is essentially a re-submit after series of discusions
earlier in
Quoted 9 lines
the list. It had always been getting pushed in my to-do list :(
See: http://marc.info/?l=linux-omap&m=122029900603111&w=2Based on the comments received, this patch includes following:
1) Updates toKconfig
(Includes the changes suggested by Aguirre Rodriguez)
2) Runtime check for OMAP35x
3) Updates toomap3_evm_defconfigQuoted 5 lines
If the changes look good, I can make updates to Beagle, Overo and Pandora boards as well.
Best regards,
Sanjeev
Quoted 7 lines
Sanjeev,
Is the HEAD of linux-omap working for you on omap3evm? I just got my EVM and am getting it going but it doesn't boot without
CONFIG_DEBUG_LL, and with that enabled, as soon as the normal serial driver is enabled, the serial console goes crazy with garbage output.
Here is the git-log from my working branch that works fine for me.
commit 15f75b6226c2d3b82062bb721e7cb9a1d6f35efd
Author: Ajay Kumar Gupta <[email protected]> Date: Tue Jan 13 14:08:44 2009 +0200
usb: musb: fix bug in musbhsdma programming
<snip>--<snip>
commit 0ec95b96fd77036a13398c66901e11cd301190d0
Author: Jouni Hogander <[email protected]> Date: Fri Jan 9 09:52:33 2009 +0200
OMAP3: PM: Emu_pwrdm is switched off by hardware even when sdti is in use <snip>--<snip>
Quoted 4 lines
I'm about to push a new PM branch and wanted to do some testing on the EVM.
Currently building HEAD of your branch will update soon.
Best regards,
Sanjeev