ARM: OMAP: board-omap3beagle: set i2c-3 to 100kHz

From: Koen Kooi <[email protected]>

Changing it to 100kHz is needed to make more devices works properly. Controlling the TI DLP Pico projector[1] doesn't work properly at 400kHz, 100kHz and lower work fine. EDID readout is unaffected by this change.

[1] http://focus.ti.com/dlpdmd/docs/dlpdiscovery.tsp?sectionId=60&tabId=2234

---
 arch/arm/mach-omap2/board-omap3beagle.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

index fe97bab..f279404 100644
@@ -227,7 +227,7 @@ static int __init omap3_beagle_i2c_init(void)
 #ifdef CONFIG_I2C2_OMAP_BEAGLE
 	omap_register_i2c_bus(2, 400, NULL, 0);
 #endif
-	omap_register_i2c_bus(3, 400, NULL, 0);
+	omap_register_i2c_bus(3, 100, NULL, 0);
 	return 0;
 }
 

1.5.6.3