[linux-dvb] QQ box dvb-s usb dongle not supported ?

ar

author

2009-01-20 19:38 UTC #0 lore raw

I am running ubuntu intrepid latest update on hp pavilion tx1000z with latest dvb kernel modules.

I have bought the "QQ box" dvb-s usb dongle and it seems to be unsupported.

HOW CAN I GET IT WORKING UNDER LINUX ?
------------------------------------------------------------------------
Here is tech info:

system: Linux hp 2.6.27-9-generic #1 SMP Thu Nov 20 22:15:32 UTC 2008
x86_64 GNU/Linux

output of lsusb -v for the device:

Bus 002 Device 027: ID 3344:1120
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00

  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  idVendor           0x3344 
  idProduct          0x1120 
  bcdDevice            0.00
  iManufacturer           0 
  iProduct                0 
  iSerial                 3 ???
  bNumConfigurations      1

Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 76
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 7
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x87 EP 7 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x03fc 1x 1020 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x0a EP 10 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x8a EP 10 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00

  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0

bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)

dmesg output:

[102008.676081] usb 2-8: new high speed USB device using ehci_hcd and
address 28
[102008.808944] usb 2-8: config 1 interface 0 altsetting 1 bulk endpoint
0x81 has invalid maxpacket 64
[102008.808966] usb 2-8: config 1 interface 0 altsetting 1 bulk endpoint
0x1 has invalid maxpacket 64
[102008.808974] usb 2-8: config 1 interface 0 altsetting 1 bulk endpoint
0x2 has invalid maxpacket 64
[102008.808982] usb 2-8: config 1 interface 0 altsetting 1 bulk endpoint
0x8A has invalid maxpacket 64
[102008.814644] usb 2-8: configuration #1 chosen from 1 choice

system: Linux hp 2.6.27-9-generic #1 SMP Thu Nov 20 22:15:32 UTC 2008 x86_64 GNU/Linux

output of lsusb -v for the device:
Bus 002 Device 027: ID 3344:1120
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00

  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  idVendor           0x3344 
  idProduct          0x1120 
  bcdDevice            0.00
  iManufacturer           0 
  iProduct                0 
  iSerial                 3 ???
  bNumConfigurations      1

Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 76
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 7
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x87 EP 7 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x03fc 1x 1020 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x0a EP 10 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x8a EP 10 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00

  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0

bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)

dmesg output :

[102008.676081] usb 2-8: new high speed USB device using ehci_hcd and address 28
[102008.808944] usb 2-8: config 1 interface 0 altsetting 1 bulk endpoint 0x81 has invalid maxpacket 64
[102008.808966] usb 2-8: config 1 interface 0 altsetting 1 bulk endpoint 0x1 has invalid maxpacket 64
[102008.808974] usb 2-8: config 1 interface 0 altsetting 1 bulk endpoint 0x2 has invalid maxpacket 64
[102008.808982] usb 2-8: config 1 interface 0 altsetting 1 bulk endpoint 0x8A has invalid maxpacket 64
[102008.814644] usb 2-8: configuration #1 chosen from 1 choice

_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead [email protected] [email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Antti Palosaari

2009-01-20 20:06 UTC #1 lore raw

Quoted 2 lines · ar

I have bought the "QQ box" dvb-s usb dongle and it seems to be unsupported.

Is that same / similar device sold by DealExtreme?

Quoted 1 line

HOW CAN I GET IT WORKING UNDER LINUX ?

You should open it and look what chips are used. Some hi res photos
from device internals could be nice to see also. If you are lucky there is drivers for chips...

regards
Antti

Igor M. Liplianin

2009-01-20 20:47 UTC #2 lore raw

In reply to ar

В сообщении от 20 January 2009 21:37:53 ar написал(а):

Quoted 145 lines

I am running ubuntu intrepid latest update on hp pavilion tx1000z with latest dvb kernel modules.
I have bought the "QQ box" dvb-s usb dongle and it seems to be unsupported.
HOW CAN I GET IT WORKING UNDER LINUX ?
------------------------------------------------------------------------
Here is tech info:
system: Linux hp 2.6.27-9-generic #1 SMP Thu Nov 20 22:15:32 UTC 2008
x86_64 GNU/Linux
output of lsusb -v for the device:
Bus 002 Device 027: ID 3344:1120
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x3344
  idProduct          0x1120
  bcdDevice            0.00
  iManufacturer           0
  iProduct                0
  iSerial                 3 ???
  bNumConfigurations      1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 76
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 7
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x87 EP 7 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x03fc 1x 1020 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x0a EP 10 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x8a EP 10 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
dmesg output:

Quoted 11 lines

[102008.676081] usb 2-8: new high speed USB device using ehci_hcd and
address 28
[102008.808944] usb 2-8: config 1 interface 0 altsetting 1 bulk endpoint
0x81 has invalid maxpacket 64
[102008.808966] usb 2-8: config 1 interface 0 altsetting 1 bulk endpoint
0x1 has invalid maxpacket 64
[102008.808974] usb 2-8: config 1 interface 0 altsetting 1 bulk endpoint
0x2 has invalid maxpacket 64
[102008.808982] usb 2-8: config 1 interface 0 altsetting 1 bulk endpoint
0x8A has invalid maxpacket 64
[102008.814644] usb 2-8: configuration #1 chosen from 1 choice

I believe, it contains LME2510 USB chip.
As I have a card with that chip too, I begin to write code (hard to say 'driver'). For now I can load firmware (of two parts) and determine 'cold' and 'warm' state. Eventually, the card was rejected by vendor and I drop it.

Signature · 2 lines

Igor M. Liplianin
Microsoft Windows Free Zone - Linux used for all Computing Tasks

ar

author

2009-01-21 15:45 UTC #3 lore raw

Quoted 11 lines · Igor M. Liplianin

В сообщении от 20 January 2009 21:37:53 ar написал(а):
Quoted 9 lines
I am running ubuntu intrepid latest update on hp pavilion tx1000z with latest dvb kernel modules.
I have bought the "QQ box" dvb-s usb dongle and it seems to be unsupported.
HOW CAN I GET IT WORKING UNDER LINUX ?
------------------------------------------------------------------------
I believe, it contains LME2510 USB chip.

it is really LME2510C chip

Quoted 3 lines

As I have a card with that chip too, I begin to write code (hard to say 'driver'). For now I can load firmware (of two parts) and determine 'cold' and 'warm' state. Eventually, the card was rejected by vendor and I drop it.

So no hope to have kernel module for linux 2.6... ?

Quoted 5 lines

_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead [email protected] [email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb