USB: Fix speed detection on EHCI cntr with root hub transaction translators
PATCH 1/1 USB: Fix speed detection on EHCI cntr with root hub transaction translators
This patch fixes an issue that the speed of USB devices was not detected correctly on some EHCI controllers. This will be used on the upcoming VCT EHCI support.
Signed-off-by Stefan Roese <[email protected]>
--- drivers/usb/usb_ehci_core.c | 17 ++++++++++++++++- 1 files changed, 16 insertions(+), 1 deletions(-)
drivers/usb/usb_ehci_core.c +16 -1
@@ -546,7 +546,22 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer, }if (reg &EHCI_PS_PP ) tmpbuf[1 ] |=USB_PORT_STAT_POWER >>8 ; - tmpbuf[1 ] |=USB_PORT_STAT_HIGH_SPEED >>8 ; + +if (ehci_is_TDI ()) { +switch ((reg >>26 ) &3 ) { +case 0 : +break ; +case 1 : + tmpbuf[1 ] |=USB_PORT_STAT_LOW_SPEED >>8 ; +break ; +case 2 : +default : + tmpbuf[1 ] |=USB_PORT_STAT_HIGH_SPEED >>8 ; +break ; + } + }else { + tmpbuf[1 ] |=USB_PORT_STAT_HIGH_SPEED >>8 ; + }if (reg &EHCI_PS_CSC ) tmpbuf[2 ] |=USB_PORT_STAT_C_CONNECTION ;
Signature · 1 line
1.6.1