XPERT TV - PVR 883
Hi, v4l.
I have some trouble in installing XPERT TV - PVR 883. lspci take this:
05:00.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder (rev 05)
Flags: bus master, medium devsel, latency 64, IRQ 21 Memory at ef000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
dmesg take this:
[ 32.296345] cx88/0: cx2388x v4l2 driver version 0.0.6 loaded [ 32.296392] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 32.296433] cx88[0]: Your board has no valid PCI Subsystem ID and thus can't [ 32.296434] cx88[0]: be autodetected. Please pass card=<n> insmod option to [ 32.296435] cx88[0]: workaround that. Redirect complaints to the vendor of [ 32.296435] cx88[0]: the TV card. Best regards, [ 32.296436] cx88[0]: -- tux [ 32.296438] cx88[0]: Here is a list of valid choices for the card=<n>
insmod option:
I try change number of card, but not have any result.
tnx for help. Sorry about my very bad english.
Signature · 7 lines
Graph <[email protected]> MgM -- video4linux-list mailing list Unsubscribe mailto:[email protected]?subject=unsubscribe https://www.redhat.com/mailman/listinfo/video4linux-list
Hi graph.
I'm not that linux expert but accorrding to your dmesg ouput i would recommend to check the driver of your mainboard chipset.
Maybe one site to look that up and which i've seen the last days is ubuntuhcl.org
Hope that helps
sl
Marius
Am 30.01.2009 um 21:17 schrieb Graph <[email protected]>:
Quoted 24 lines
Hi, v4l.
I have some trouble in installing XPERT TV - PVR 883. lspci take this:
05:00.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder (rev 05)
Flags: bus master, medium devsel, latency 64, IRQ 21 Memory atef000000(32-bit, non-prefetchable) [size=16M]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2dmesg take this:
[ 32.296345] cx88/0: cx2388x v4l2 driver version 0.0.6 loaded [ 32.296392] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 32.296433] cx88[0]: Your board has no valid PCI Subsystem ID and thus can't [ 32.296434] cx88[0]: be autodetected. Please pass card=<n> insmod option to [ 32.296435] cx88[0]: workaround that. Redirect complaints to the vendor of [ 32.296435] cx88[0]: the TV card. Best regards, [ 32.296436] cx88[0]: -- tux [ 32.296438] cx88[0]: Here is a list of valid choices for the card=<n>
Quoted 15 lines
insmod option:
I try change number of card, but not have any result.
tnx for help. Sorry about my very bad english.
Signature · 7 lines
Graph <[email protected]> MgM -- video4linux-list mailing list Unsubscribe mailto:[email protected]?subject=unsubscribe https://www.redhat.com/mailman/listinfo/video4linux-list
--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list