LinuxTv issue with Hauppauge WinTV-NOVA-TD-Stick - very near (but not quite ) working]
Hi,
I have been following the good instructions for getting the above work with my fedora 9 64bit machine from :
http://www.linuxtv.org/wiki/index.php/Hauppauge_WinTV-NOVA-TD-Stick#Firmware
It is very nearly working, and I seem to have a bug which is manifesting itself in 2 ways.
1. If I try :
scandvb /usr/share/doc/dvb-apps-1.1.1/channels.conf-dvbt-sandy_heath
I get the following ERROR which I can not locate on the web:
scanning /usr/share/doc/dvb-apps-1.1.1/channels.conf-dvbt-sandy_heath
using '/dev/dvb/adapter0/frontend0' and
'/dev/dvb/adapter0/demux0'
ERROR: cannot
parse'BBC-Choice:641833334:INVERSION_OFF:BANDWIDTH_8_MHZ:FEC_2_3:FEC_NONE:QAM_64:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:620:621
'2. When I enter kaffeine, I can scan the dvb device and all of the channels appear in the menu. But I can not get any to display (audio or video) , when selected.
If I run Kaffeine from the command line, I get:
kaffeine
/dev/dvb/adapter0/frontend0 : opened ( DiBcom 7000PC ) /dev/dvb/adapter1/frontend0 : opened ( DiBcom 7000PC ) 0 EPG plugins loaded for device 0:0.
0 EPG plugins loaded for device 1:0.
Loaded epg data : 0 events (0 msecs)
The when I select a channel from the kaffeine menu I get on the command line
Tuning to: BBC ONE / autocount: 0 Using DVB device 0:0 "DiBcom 7000PC" tuning DVB-T to 642000000 Hz
inv:2 bw:3 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4
...............
Not able to lock to the signal on the given frequency Frontend closed
Tuning delay: 2688 ms
The dvb-app have been installed, along with the firmaware and the modprobe.d/options file have been created with the LNA option as required.
If I run
dmesg | grep dvb
I am getting
dvb-usb: found a 'Hauppauge Nova-TD Stick/Elgato Eye-TV Diversity' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
dvb-usb: Hauppauge Nova-TD Stick/Elgato Eye-TV Diversity successfully initialized and connected.
usbcore: registered new interface driver dvb_usb_dib0700
I amn running the NOVA device with an external aerial cable: with good signal and S/N ratios, so am not using their mini aerial
Any thoughts to the missing piece of the jigsaw would be most welcome.
Best regards
Colin Thomas
Quoted 8 lines
I amn running the NOVA device with an external aerial cable: with good signal and S/N ratios, so am not using their mini aerial
Any thoughts to the missing piece of the jigsaw would be most welcome.
Best regards
Colin Thomas
please try http://mercurial.intuxication.org/hg/s2-liplianin
with scan-s2 http://mercurial.intuxication.org/hg/scan-s2
with ini files from http://www.vdr-settings.com/download/channels/CLyngsatSP.tar.bz2 (folder scan-s2)
and http://hg.kewl.org/dvb2010/ with xml files from http://www.vdr-settings.com/download/channels/CLyngsatSP.tar.bz2
I hope it will help you
Goga
Quoted 12 lines
Quoted 8 lines
I amn running the NOVA device with an external aerial cable: with good signal and S/N ratios, so am not using their mini aerial
Any thoughts to the missing piece of the jigsaw would be most welcome.
Best regards
Colin Thomas
please try http://mercurial.intuxication.org/hg/s2-liplianin
with scan-s2 http://mercurial.intuxication.org/hg/scan-s2
Quoted 6 lines
with ini files from http://www.vdr-settings.com/download/channels/CLyngsatSP.tar.bz2 (folder scan-s2)
and http://hg.kewl.org/dvb2010/ with xml files from http://www.vdr-settings.com/download/channels/CLyngsatSP.tar.bz2
I hope it will help you
sorry I was wrong. You have dvb-t version of Nova, not dvb-s
Goga