Skip to contentSkip to conversation

Add support for the digsy MTC board.

PATCH Superseded Grzegorz Bernacki 1 participant 1 message Feb 3, 2009

Subsystems (2)

v2 of 8 Superseded Latest is v8 →

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 Add support for the digsy MTC board.

This is the InterControl custom device based on the MPC5200B chip.

---
Version 2:
- use I/O accessor functions instead of volatile pointer
- set ethernet address only if not set in environment
- add some comments and some style cleanup

 MAKEALL                          |    1 +
 Makefile                         |   16 ++
 board/digsy_mtc/Makefile         |   51 ++++++
 board/digsy_mtc/config.mk        |   43 +++++
 board/digsy_mtc/digsy_mtc.c      |  330 ++++++++++++++++++++++++++++++++++++
 board/digsy_mtc/eeprom.h         |   32 ++++
 board/digsy_mtc/is42s16800a-7t.h |   28 +++
 cpu/mpc5xxx/ide.c                |    2 +-
 drivers/net/mpc5xxx_fec.c        |    1 +
 include/configs/digsy_mtc.h      |  345 ++++++++++++++++++++++++++++++++++++++
 10 files changed, 848 insertions(+), 1 deletions(-)
 create mode 100644 board/digsy_mtc/Makefile
 create mode 100644 board/digsy_mtc/config.mk
 create mode 100644 board/digsy_mtc/digsy_mtc.c
 create mode 100644 board/digsy_mtc/eeprom.h
 create mode 100644 board/digsy_mtc/is42s16800a-7t.h
 create mode 100644 include/configs/digsy_mtc.h
MAKEALL +1 -0
index 530fe82..71ce43a 100755
@@ -47,6 +47,7 @@ LIST_5xxx="		\
 	BC3450		\
 	cm5200		\
 	cpci5200	\
+	digsy_mtc	\
 	EVAL5200	\
 	fo300		\
 	icecube_5100	\
Makefile +16 -0
index 8c73586..fed942e 100644
@@ -527,6 +527,22 @@ cm5200_config:	unconfig
 cpci5200_config:  unconfig
 	@$(MKCONFIG) -a cpci5200  ppc mpc5xxx cpci5200 esd
 
+digsy_mtc_config \
+digsy_mtc_LOWBOOT_config	\
+digsy_mtc_RAMBOOT_config:	unconfig
+	@mkdir -p $(obj)include
+	@mkdir -p $(obj)board/digsy_mtc
+	@ >$(obj)include/config.h
+	@[ -z "$(findstring LOWBOOT_,$@)" ] || \
+		{ echo "TEXT_BASE = 0xFF000000" >$(obj)board/digsy_mtc/config.tmp ; \
+		  echo "... with LOWBOOT configuration" ; \
+		}
+	@[ -z "$(findstring RAMBOOT_,$@)" ] || \
+		{ echo "TEXT_BASE = 0x00100000" >$(obj)board/digsy_mtc/config.tmp ; \
+		  echo "... with RAMBOOT configuration" ; \
+		}
+	@$(MKCONFIG) -a digsy_mtc  ppc mpc5xxx digsy_mtc
+
 hmi1001_config:	unconfig
 	@$(MKCONFIG) hmi1001 ppc mpc5xxx hmi1001
 
board/digsy_mtc/Makefile new file +51 -0

51 lines not on this page · raw message

board/digsy_mtc/config.mk new file +43 -0

43 lines not on this page · raw message

board/digsy_mtc/digsy_mtc.c new file +330 -0

330 lines not on this page · raw message

board/digsy_mtc/eeprom.h new file +32 -0
new file mode 100644
index 0000000..39e0378
@@ -0,0 +1,32 @@
+/*
+ * (C) Copyright 2009 Semihalf.
+ * Written by: Grzegorz Bernacki <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the anty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+#ifndef CMD_EEPROM_H
+#define CMD_EEPROM_H
+
+#define EEPROM_ADDR		CONFIG_SYS_I2C_EEPROM_ADDR
+#define EEPROM_LEN		1024	/* eeprom length */
+#define EEPROM_IDENT		2408	/* identification word */
+#define EEPROM_ADDR_IDENT	0	/* identification word offset */
+#define EEPROM_ADDR_LEN_SYS	2	/* system area length offset */
+#define EEPROM_ADDR_LEN_SYSCFG	4	/* system config area length offset */
+#define EEPROM_ADDR_ETHADDR	23	/* ethernet address offset */
+
+#endif
board/digsy_mtc/is42s16800a-7t.h new file +28 -0
new file mode 100644
index 0000000..1873ea7
@@ -0,0 +1,28 @@
+/*
+ * (C) Copyright 2004-2009
+ * Mark Jonas, Freescale Semiconductor, mark.jonas at motorola.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#define SDRAM_MODE	0x00CD0000
+#define SDRAM_CONTROL	0x505F0000
+#define SDRAM_CONFIG1	0xD2322900
+#define SDRAM_CONFIG2	0x8AD70000
+
cpu/mpc5xxx/ide.c +1 -1
index df5b4ac..88da199 100644
@@ -42,7 +42,7 @@ int ide_preinit (void)
 	struct mpc5xxx_sdma *psdma = (struct mpc5xxx_sdma *) MPC5XXX_SDMA;
 
 	reg = *(vu_long *) MPC5XXX_GPS_PORT_CONFIG;
-#if defined(CONFIG_TOTAL5200)
+#if defined(CONFIG_TOTAL5200) || defined(CONFIG_DIGSY_MTC)
 	/* ATA cs0/1 on i2c2 clk/io */
 	reg = (reg & ~0x03000000ul) | 0x02000000ul;
 #else
drivers/net/mpc5xxx_fec.c +1 -0
index f8618b1..a1c72d6 100644
@@ -893,6 +893,7 @@ int mpc5xxx_fec_initialize(bd_t * bis)
 	fec->rbdBase = (FEC_RBD *)(FEC_BD_BASE + FEC_TBD_NUM * sizeof(FEC_TBD));
 #if defined(CONFIG_CANMB)		|| \
 	defined(CONFIG_CM5200)		|| \
+	defined(CONFIG_DIGSY_MTC)	|| \
 	defined(CONFIG_HMI1001)		|| \
 	defined(CONFIG_ICECUBE)		|| \
 	defined(CONFIG_INKA4X0)		|| \
include/configs/digsy_mtc.h new file +345 -0

345 lines not on this page · raw message

Signature · 1 line
1.6.0.6