Skip to contentSkip to conversation

Driver for this DVB-T tuner?

DISCUSSION Stefan Czinczoll 2 participants 10 messages Feb 8, 2009 – Feb 10, 2009 Media (V4L/DVB)

lore
Share & tools
lore
#0 lore raw

Hi all,

I'm trying to get my Terratec DVB-T USB (Cinergy T USB XE MKII) working with linux. Any chance in the near future? It works with Windumb & BDA drivers, but this is not what i want... ;-)

Below is from dmesg output.

Kind regards,

Stefan

[..]
dvb-usb: found a 'TerraTec Cinergy T USB XE' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (TerraTec Cinergy T USB XE)
input: Power Button (FF) as /class/input/input3
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input4
ACPI: Power Button (CM) [PWRB]
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. forcedeth 0000:00:05.0: setting latency timer to 64
nv_probe: set workaround bit for reversed mac addr
af9013: firmware version:4.65.0
DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T)...
af9015: Freescale MC44S803 tuner found but no driver for thattuner. Look at the Linuxtv.org for tuner driver
status.
dvb-usb: TerraTec Cinergy T USB XE successfully initialized and connected.
usbcore: registered new interface driver dvb_usb_af9015
[..]

Signature · 1 line
Stefan Czinczoll <[email protected]>
#1 lore raw
Quoted 3 lines · Stefan Czinczoll

I'm trying to get my Terratec DVB-T USB (Cinergy T USB XE MKII) working with linux. Any chance in the near future? It works with Windumb & BDA drivers, but this is not what i want... ;-)

You should use driver from
http://linuxtv.org/hg/~anttip/mc44s803/

Quoted 1 line

af9013: firmware version:4.65.0

Use 4.95.0 instead.

Quoted 4 lines

DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T)...
af9015: Freescale MC44S803 tuner found but no driver for thattuner. Look at the Linuxtv.org for tuner driver
status.

regards
Antti

#2 lore raw

Wow that was fast! Thanks!!!

Quoted 2 lines

You should use driver from
http://linuxtv.org/hg/~anttip/mc44s803/

I managed to do that.

Quoted 3 lines
Quoted 1 line

af9013: firmware version:4.65.0

Use 4.95.0 instead.

How do I insert it correctly into the source tree? A short hint (to a readme) should help.

Thanks again!

Stefan

#3 lore raw
Quoted 11 lines · [email protected] wrote:

Wow that was fast! Thanks!!!

Quoted 2 lines

You should use driver from
http://linuxtv.org/hg/~anttip/mc44s803/

I managed to do that.

Quoted 2 lines
Quoted 1 line

af9013: firmware version:4.65.0

Use 4.95.0 instead.

How do I insert it correctly into the source tree? A short hint (to a readme) should help.

Sorry, didn't understand what you mean.

Anyhow, Mauro just committed this driver to the master, you can now use v4l-dvb -master instead.
http://linuxtv.org/repo/

regards
Antti

Signature · 1 line
http://palosaari.fi/
#4 lore raw

----- Original Nachricht ----

Von:     Antti Palosaari <[email protected]>
An:      [email protected]
Datum:   09.02.2009 22:26
Betreff: Re: Aw: Re: Driver for this DVB-T tuner?
Quoted 8 lines
Quoted 7 lines · [email protected] wrote:

Wow that was fast! Thanks!!!

Quoted 2 lines

You should use driver from
http://linuxtv.org/hg/~anttip/mc44s803/

I managed to do that.

Quoted 7 lines
Quoted 5 lines
Quoted 2 lines
Quoted 1 line

af9013: firmware version:4.65.0

Use 4.95.0 instead.

How do I insert it correctly into the source tree? A short hint (to a readme) should help.

Sorry, didn't understand what you mean.

I've downloaded the af9015 firmware version 4.95.0 from here:

http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/4.95.0/

but simply downloading and installing into /lib/firmware seems to be not enough here (Mandriva 2009.0).

Quoted 1 line

Anyhow, Mauro just committed this driver to the master, you can now use

I did so, but firmware 4.95.0 is not included?!?

Thanks,

Stefan

#5 lore raw
In reply to Antti Palosaari

----- Original Nachricht ----

Von:     Antti Palosaari <[email protected]>
An:      [email protected]
Datum:   09.02.2009 22:26
Betreff: Re: Aw: Re: Driver for this DVB-T tuner?
Quoted 8 lines
Quoted 7 lines · [email protected] wrote:

Wow that was fast! Thanks!!!

Quoted 2 lines

You should use driver from
http://linuxtv.org/hg/~anttip/mc44s803/

I managed to do that.

Quoted 7 lines
Quoted 5 lines
Quoted 2 lines
Quoted 1 line

af9013: firmware version:4.65.0

Use 4.95.0 instead.

How do I insert it correctly into the source tree? A short hint (to a readme) should help.

Sorry, didn't understand what you mean.

I've downloaded the af9015 firmware version 4.95.0 from here:

http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/4.95.0/

but simply downloading and installing into /lib/firmware seems to be not enough here (Mandriva 2009.0).

Quoted 1 line

Anyhow, Mauro just committed this driver to the master, you can now use

I did so, but firmware 4.95.0 is not included?!?

Thanks,

Stefan

#6 lore raw
Quoted 3 lines · [email protected] wrote:

I've downloaded the af9015 firmware version 4.95.0 from here:

http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/4.95.0/

Thats ok

Quoted 1 line

but simply downloading and installing into /lib/firmware seems to be not enough here (Mandriva 2009.0).

?? How did you installed old 4.65.0 firmware? Just replace 4.65.0 firmware file (file name is same) with 4.95.0 is enough.

Quoted 3 lines
Quoted 1 line

Anyhow, Mauro just committed this driver to the master, you can now use

I did so, but firmware 4.95.0 is not included?!?

Is not included? Firmware does not come with driver - it should be downloaded and installed separately.

What it now prints to the /var/log/messages ?

regards
Antti

Signature · 1 line
http://palosaari.fi/
#9 lore raw
In reply to Antti Palosaari

----- Original Nachricht ----

Von:     Antti Palosaari <[email protected]>
An:      [email protected]
Datum:   09.02.2009 22:26
Betreff: Re: Aw: Re: Driver for this DVB-T tuner?
Quoted 8 lines
Quoted 7 lines · [email protected] wrote:

Wow that was fast! Thanks!!!

Quoted 2 lines

You should use driver from
http://linuxtv.org/hg/~anttip/mc44s803/

I managed to do that.

Quoted 7 lines
Quoted 5 lines
Quoted 2 lines
Quoted 1 line

af9013: firmware version:4.65.0

Use 4.95.0 instead.

How do I insert it correctly into the source tree? A short hint (to a readme) should help.

Sorry, didn't understand what you mean.

I've downloaded the af9015 firmware version 4.95.0 from here:

http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/4.95.0/

but simply downloading and installing into /lib/firmware seems to be not enough here (Mandriva 2009.0).

Quoted 1 line

Anyhow, Mauro just committed this driver to the master, you can now use

I did so, but firmware 4.95.0 is not included?!?

Thanks,

Stefan

#7 lore raw
In reply to [email protected]
Quoted 3 lines · Antti

?? How did you installed old 4.65.0 firmware? Just replace 4.65.0 firmware file (file name is same) with 4.95.0 is enough.

I'm not fully sure, if I did it at all, it was from an old, unsuccessful attempt. Tryed an "updatedb" as root and the only places where I could find it has the new version. I'm suspecting it comes with standard kernel 2.6.27.10-1 on Mandriva, which I'm using. Should I deactivate 9015 from standard kernel options?

Anyhow - is there no default place to store firmware when compiling a kernel or modules?

Quoted 1 line

What it now prints to the /var/log/messages ?

This is still as before:

Feb 10 20:10:44 localhost kernel: af9013: firmware version:4.65.0

Thanks for your help,

Stefan

#8 lore raw
Quoted 1 line · [email protected] wrote:
Feb 10 20:10:44 localhost kernel: af9013: firmware version:4.65.0

Still old firmware. What md5sum says?

[root@localhost ~]# md5sum /lib/firmware/dvb-usb-af9015.fw dccbc92c9168cc629a88b34ee67ede7b /lib/firmware/dvb-usb-af9015.fw

Antti

Signature · 1 line
http://palosaari.fi/