ppc4xx: Don't write the MAC address into the internal SoC registers
Remove this code. It's not needed. The 4xx EMAC driver stores the MAC addresses into the SoC registers instead.
Signed-off-by Stefan Roese <[email protected]>
--- cpu/ppc4xx/cpu_init.c | 29 +---------------------------- 1 files changed, 1 insertions(+), 28 deletions(-)
cpu/ppc4xx/cpu_init.c +1 -28
@@ -321,35 +321,9 @@ cpu_init_f (void)*/ int cpu_init_r (void ) { -#if defined(CONFIG_405GP ) || defined(CONFIG_405EP ) -bd_t *bd = gd->bd; -unsigned long reg; -uchar enetaddr[6 ];#if defined(CONFIG_405GP )uint pvr =get_pvr (); -#endif - -/* -* Write Ethernetaddress into on-chip register -*/ - reg =0x00000000 ; -eth_getenv_enetaddr ("ethaddr" , enetaddr); - reg |= enetaddr[0 ];/* set high address */ - reg = reg <<8 ; - reg |= enetaddr[1 ]; -out32 (EMAC_IAH , reg); - - reg =0x00000000 ; - reg |= enetaddr[2 ];/* set low address */ - reg = reg <<8 ; - reg |= enetaddr[3 ]; - reg = reg <<8 ; - reg |= enetaddr[4 ]; - reg = reg <<8 ; - reg |= enetaddr[5 ]; -out32 (EMAC_IAL , reg); -#if defined(CONFIG_405GP )/* * Set edge conditioning circuitry on PPC405GPr * for compatibility to existing PPC405GP designs.
@@ -358,7 +332,6 @@ int cpu_init_r (void) mtdcr(ecr, 0x60606000); }#endif /* defined(CONFIG_405GP) */ -#endif /* defined(CONFIG_405GP) || defined(CONFIG_405EP) */ -return (0 ); +return 0 ; }
Signature · 1 line
1.6.1.3