Skip to contentSkip to conversation

Make the ELF loader aware of backwards compatibility

PATCH Applied Alexander Graf 4 participants 7 messages Feb 28, 2009 – Mar 13, 2009

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Make the ELF loader aware of backwards compatibility

Most 64 bit architectures I'm aware of support running 32 bit code of the same architecture as well.

So x86_64 can run i386 code easily and ppc64 can run ppc code.

Unfortunately, the current checks are pretty strict. So you can only load e.g. an x86_64 elf binary on qemu-system-x86_64, but no i386 one.

This can get really annoying. I first encountered this issue with my multiboot patch, where qemu-system-x86_64 was unable to load an i386 elf binary because the elf loader rejected it.

The same thing happened again on PPC64 now. The firmware we're loading is a PPC32 elf binary, as it's shared with PPC32. But the platform is PPC64.

Right now there is a hack for this in the ppc cpu.h definition, that simply sets the type to PPC32 in system emulation mode. While that works fine for the firmware, it's no good if you also want to load a PPC64 kernel with -kernel.

So in order to solve this mess, I figured the easiest way is to make the elf loader aware of platforms that are backwards compatible. For now I was only sure that x86_64 does i386 and ppc64 does ppc32, but maybe there are other combinations too.

This patch is a prerequisite for having a working -kernel option on PPC64.

---
 elf_ops.h        |   17 +++++++++++++++--
 target-ppc/cpu.h |    2 +-
 2 files changed, 16 insertions(+), 3 deletions(-)
elf_ops.h +15 -2
index feea12f..485442a 100644
@@ -194,8 +194,21 @@ static int glue(load_elf, SZ)(int fd, int64_t address_offset,
         glue(bswap_ehdr, SZ)(&ehdr);
     }
 
-    if (ELF_MACHINE != ehdr.e_machine)
-        goto fail;
+    switch (ELF_MACHINE) {
+        case EM_PPC64:
+            if (EM_PPC64 != ehdr.e_machine)
+                if (EM_PPC != ehdr.e_machine)
+                    goto fail;
+            break;
+        case EM_X86_64:
+            if (EM_X86_64 != ehdr.e_machine)
+                if (EM_386 != ehdr.e_machine)
+                    goto fail;
+            break;
+        default:
+            if (ELF_MACHINE != ehdr.e_machine)
+                goto fail;
+    }
 
     if (pentry)
    	*pentry = (uint64_t)(elf_sword)ehdr.e_entry;
target-ppc/cpu.h +1 -1
index 80ee76c..4fc06c3 100644
@@ -67,7 +67,7 @@
 #define TARGET_HAS_ICE 1
 
 /* Load a 32 bit BIOS also on 64 bit machines */
-#if defined (TARGET_PPC64) && defined(CONFIG_USER_ONLY)
+#if defined (TARGET_PPC64)
 #define ELF_MACHINE     EM_PPC64
 #else
 #define ELF_MACHINE     EM_PPC
Signature · 1 line
1.5.3.1
#1 lore raw
Quoted 2 lines · Alexander Graf

Most 64 bit architectures I'm aware of support running 32 bit code
of the same architecture as well.

For Sparc64 this is only true for userland, kernel level code is not compatible at all. Sparc64 kernel can run Sparc64 and Sparc32 binaries, but a Sparc32 kernel will crash on Sparc64.

Quoted 6 lines

/* Load a 32 bit BIOS also on 64 bit machines */
-#if defined (TARGET_PPC64) && defined(CONFIG_USER_ONLY) +#if defined (TARGET_PPC64)
#define ELF_MACHINE EM_PPC64
#else
#define ELF_MACHINE EM_PPC

The comment should be removed with the hack.

#2 lore raw

Am 28.02.2009 um 16:30 schrieb Blue Swirl:

Quoted 7 lines · Alexander Graf
Quoted 2 lines

Most 64 bit architectures I'm aware of support running 32 bit code of the same architecture as well.

For Sparc64 this is only true for userland, kernel level code is not compatible at all. Sparc64 kernel can run Sparc64 and Sparc32 binaries, but a Sparc32 kernel will crash on Sparc64.

Same for ppc. To install Linux, you need to type "install64" at the prompt, the default "install" crashes on a G5.

Andreas

#3 lore raw
Quoted 10 lines · Andreas Färber

Am 28.02.2009 um 16:30 schrieb Blue Swirl:

Quoted 6 lines · Alexander Graf
Quoted 4 lines

Most 64 bit architectures I'm aware of support running 32 bit code of the same architecture as well.

Quoted 7 lines
Quoted 4 lines

For Sparc64 this is only true for userland, kernel level code is not compatible at all. Sparc64 kernel can run Sparc64 and Sparc32 binaries, but a Sparc32 kernel will crash on Sparc64.

Same for ppc. To install Linux, you need to type "install64" at the prompt,
the default "install" crashes on a G5.

Not exactly. I guess it's possible to construct a dual PPC32/PPC64 kernel for 32 bit mode because even though the MMUs are not compatible, instruction sets are. But Sparc32 supervisor instructions do wildly different things on a Sparc64.

#4 lore raw
In reply to Blue Swirl
Quoted 8 lines · Blue Swirl
Quoted 2 lines · Alexander Graf

Most 64 bit architectures I'm aware of support running 32 bit code of the same architecture as well.

For Sparc64 this is only true for userland, kernel level code is not compatible at all. Sparc64 kernel can run Sparc64 and Sparc32 binaries, but a Sparc32 kernel will crash on Sparc64.

Quoted 8 lines

target-ppc/cpu.h line 73

Quoted 6 lines

/* Load a 32 bit BIOS also on 64 bit machines */

target-ppc/cpu.h +1 -1
-#if defined (TARGET_PPC64) && defined(CONFIG_USER_ONLY)
+#if defined (TARGET_PPC64)
 #define ELF_MACHINE     EM_PPC64
 #else
 #define ELF_MACHINE     EM_PPC

The comment should be removed with the hack.

I agree.

Any functional issues with this patch? -kernel for ppc64 still doesn't work with current SVN :-).

Alex

#5 lore raw
Quoted 26 lines · Alexander Graf
Quoted 11 lines · Blue Swirl
Quoted 3 lines · Alexander Graf

Most 64 bit architectures I'm aware of support running 32 bit code of the same architecture as well.

For Sparc64 this is only true for userland, kernel level code is not compatible at all. Sparc64 kernel can run Sparc64 and Sparc32 binaries, but a Sparc32 kernel will crash on Sparc64.

Quoted 10 lines

target-ppc/cpu.h line 73

Quoted 7 lines

/* Load a 32 bit BIOS also on 64 bit machines */

target-ppc/cpu.h +1 -1
-#if defined (TARGET_PPC64) && defined(CONFIG_USER_ONLY)
+#if defined (TARGET_PPC64)
 #define ELF_MACHINE     EM_PPC64
 #else
 #define ELF_MACHINE     EM_PPC

The comment should be removed with the hack.

Quoted 4 lines

I agree.

Any functional issues with this patch? -kernel for ppc64 still doesn't work
with current SVN :-).

The elf_check_arch macro that linux-user uses could be cleaner approach. But this is OK as the first step, so I'll commit this shortly.

Applied
#6 lore raw
In reply to Alexander Graf
Quoted 26 lines · Alexander Graf
Quoted 11 lines · Blue Swirl
Quoted 3 lines · Alexander Graf

Most 64 bit architectures I'm aware of support running 32 bit code of the same architecture as well.

For Sparc64 this is only true for userland, kernel level code is not compatible at all. Sparc64 kernel can run Sparc64 and Sparc32 binaries, but a Sparc32 kernel will crash on Sparc64.

Quoted 10 lines

target-ppc/cpu.h line 73

Quoted 7 lines

/* Load a 32 bit BIOS also on 64 bit machines */

target-ppc/cpu.h +1 -1
-#if defined (TARGET_PPC64) && defined(CONFIG_USER_ONLY)
+#if defined (TARGET_PPC64)
 #define ELF_MACHINE     EM_PPC64
 #else
 #define ELF_MACHINE     EM_PPC

The comment should be removed with the hack.

Quoted 4 lines

I agree.

Any functional issues with this patch? -kernel for ppc64 still doesn't work
with current SVN :-).

Thanks, applied.