KNC1
Hi,
I've got some problems getting my KNC1 DVB-C working correctly.
The card is found correctly as
DVB: registering new adapter (KNC1 DVB-C MK3)
DVB: registering adapter 0 frontend 0 (Philips TDA10023 DVB-C)
I also have a CAM connected with an irdeto card installed. Syslog tells me that its been succesfullay detected.
dvb_ca adapter 0: DVB CAM detected and initialised successfully
I can view non-encrypted/encrypted channels when using Kaffeine, everything is working perfectly.
My problem is that I want to record tv from the consol (I'm working on script that can record television and expose it thru mediatomb to be played on my PS3), and Kaffeine does not run without its UI.
I have tried mplayer and xine, but I quickly found that neither of them has the abilty to decrypt using the attached CAM. So I went onto try gnutv, and thats where my problems really start.
When I start gnutv like this.
./gnutv -caslotnum 0 -out file test.ts -channels channels.conf "Kanal 5"
I get this error in syslog.
DVB: TDA10023(0): tda10023_writereg, writereg error (reg == 0x2a, val == 0x02, ret == -121)
gnutv outputs this to console:
CAM Application type: 01
CAM Application manufacturer: cafe
CAM Manufacturer code: babe
CAM Menu string: Irdeto Access
And nothing else.
The stream saved to test.ts has no video, so I presume gnutv does not decrypt the video stream.
./gnutv -cammenu works fine, and I can access the cam information using it.
The problem is also there when using zap and dvbstreamer. I have not yet tried mythtv or vdr, since I was hoping for a simpler solution using gnutv or similar software to just dump the stream to disk (decrypted ofcourse).
I have installed latest v4l drivers from CSV and alos latest dvbapps from CSV.
I hope somebody might now what the problem could be..
Regards,
Rasmus Pedersen
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead [email protected] [email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Hi Rasmus,
the VLC media player records programs for me perfectly from the command line. If you have problems to give the correct options to it, don't hesitate to ask.
Regards,
Tomas
----- Original Message -----
From: "Rasmus Pedersen" <[email protected]>
To: <[email protected]>
Sent: Wednesday, March 11, 2009 12:19 AM
Subject: [linux-dvb] KNC1
Quoted 5 lines
Hi,
I've got some problems getting my KNC1 DVB-C working correctly.
The card is found correctly as
.........
Quoted 3 lines
My problem is that I want to record tv from the consol (I'm working on script that can record television and expose it thru mediatomb to be played on my PS3), and Kaffeine does not run without its UI.
.........
Quoted 11 lines
The problem is also there when using zap and dvbstreamer. I have not yet tried mythtv or vdr, since I was hoping for a simpler solution using gnutv or similar software to just dump the stream to disk (decrypted ofcourse).
I hope somebody might now what the problem could be..
Regards,
Rasmus Pedersen
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead [email protected] [email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Hi Tomas
Ahh, I had forgotten all about VLC.
What options you use to get it working?
Regards,
Rasmus
ons, 11 03 2009 kl. 00:26 +0100, skrev Tomas Drajsajtl:
Quoted 18 lines
Hi Rasmus,
the VLC media player records programs for me perfectly from the command line. If you have problems to give the correct options to it, don't hesitate to ask.Regards,
Tomas----- Original Message -----
From: "Rasmus Pedersen" <[email protected]>
To: <[email protected]>
Sent: Wednesday, March 11, 2009 12:19 AM
Subject: [linux-dvb] KNC1Quoted 2 lines
Hi,
Quoted 20 lines
Quoted 3 lines
I've got some problems getting my KNC1 DVB-C working correctly.
The card is found correctly as
.........
Quoted 3 lines
My problem is that I want to record tv from the consol (I'm working on script that can record television and expose it thru mediatomb to be played on my PS3), and Kaffeine does not run without its UI.
.........
Quoted 11 lines
The problem is also there when using zap and dvbstreamer. I have not yet tried mythtv or vdr, since I was hoping for a simpler solution using gnutv or similar software to just dump the stream to disk (decrypted ofcourse).
I hope somebody might now what the problem could be..
Regards,
Rasmus Pedersen
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead [email protected] [email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Hi Tomas,
VLC works perfect, I can view the encrypted channels now. One step closer to getting recorded tv on my PS3.
Now I just need to figure out how to make VLC save the stream to disk.
Thanks alot :-)
ons, 11 03 2009 kl. 00:43 +0100, skrev Rasmus Pedersen:
Quoted 52 lines
Hi Tomas
Ahh, I had forgotten all about VLC.
What options you use to get it working?
Regards,
Rasmusons, 11 03 2009 kl. 00:26 +0100, skrev Tomas Drajsajtl:
Quoted 18 lines
Hi Rasmus,
the VLC media player records programs for me perfectly from the command line. If you have problems to give the correct options to it, don't hesitate to ask.Regards,
Tomas----- Original Message -----
From: "Rasmus Pedersen" <[email protected]>
To: <[email protected]>
Sent: Wednesday, March 11, 2009 12:19 AM
Subject: [linux-dvb] KNC1Quoted 2 lines
Hi,
Quoted 20 lines
Quoted 3 lines
I've got some problems getting my KNC1 DVB-C working correctly.
The card is found correctly as
.........
Quoted 3 lines
My problem is that I want to record tv from the consol (I'm working on script that can record television and expose it thru mediatomb to be played on my PS3), and Kaffeine does not run without its UI.
.........
Quoted 11 lines
The problem is also there when using zap and dvbstreamer. I have not yet tried mythtv or vdr, since I was hoping for a simpler solution using gnutv or similar software to just dump the stream to disk (decrypted ofcourse).
I hope somebody might now what the problem could be..
Regards,
Rasmus Pedersen
Quoted 5 lines
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead [email protected] [email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead [email protected] [email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Hi Rasmus,
something like
vlc -vvv --color -I dummy --ts-es-id-pid --program=1 --dvb-adapter=0 dvb: --dvb-frequency=258000000 --dvb-srate=6900000 --dvb-modulation=64 --sout '#standard{access=file,mux=ts,dst="record.mpg"}'
does the job. Of course you need to pass your own DVB-C options.
Regards,
Tomas
----- Original Message -----
From: Rasmus Pedersen
To: [email protected]
Sent: Wednesday, March 11, 2009 1:56 AM
Subject: Re: [linux-dvb] KNC1
Hi Tomas,
VLC works perfect, I can view the encrypted channels now. One step closer to getting recorded tv on my PS3.
Now I just need to figure out how to make VLC save the stream to disk.
Thanks alot :-)
ons, 11 03 2009 kl. 00:43 +0100, skrev Rasmus Pedersen:
Hi Tomas
Ahh, I had forgotten all about VLC.
What options you use to get it working?
Regards,
Rasmus
ons, 11 03 2009 kl. 00:26 +0100, skrev Tomas Drajsajtl:
Hi Rasmus,
the VLC media player records programs for me perfectly from the command line. If you have problems to give the correct options to it, don't hesitate to ask.
Regards,
Tomas
----- Original Message -----
From: "Rasmus Pedersen" <[email protected]>
To: <[email protected]>
Sent: Wednesday, March 11, 2009 12:19 AM
Subject: [linux-dvb] KNC1
Quoted 5 lines
Hi,
I've got some problems getting my KNC1 DVB-C working correctly.
The card is found correctly as
.........
Quoted 3 lines
My problem is that I want to record tv from the consol (I'm working on script that can record television and expose it thru mediatomb to be played on my PS3), and Kaffeine does not run without its UI.
.........
Quoted 11 lines
The problem is also there when using zap and dvbstreamer. I have not yet tried mythtv or vdr, since I was hoping for a simpler solution using gnutv or similar software to just dump the stream to disk (decrypted ofcourse).
I hope somebody might now what the problem could be..
Regards,
Rasmus Pedersen
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead [email protected] [email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
------------------------------------------------------------------------------
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead [email protected] [email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead [email protected] [email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Hi Tomas
Thanks for the info. I successfully recorded various channels and played them on the PS3, so fare so good. :)
I only have a bit of trouble recording the h.264 channels. If I view them with VLC they work fin, but if I record them with VLC and then view them with VLC they get all pixelated.
The PS3 wont play them either, even tho it plays a h.264 stream recorded with Xine from the same channel.
I think I might be missing some setting when recording the h.264 stream, since it works perfecly when viewing live tv with VLC.
Regards,
Rasmus
ons, 11 03 2009 kl. 07:21 +0100, skrev Tomas Drajsajtl:
Quoted 99 lines
Hi Rasmus,
something likevlc -vvv --color -I dummy --ts-es-id-pid --program=1 --dvb-adapter=0
dvb: --dvb-frequency=258000000 --dvb-srate=6900000 --dvb-modulation=64 --sout '#standard{access=file,mux=ts,dst="record.mpg"}'does the job. Of course you need to pass your own DVB-C options.
Regards,
Tomas----- Original Message ----- From: Rasmus Pedersen To: [email protected] Sent: Wednesday, March 11, 2009 1:56 AM Subject: Re: [linux-dvb] KNC1 Hi Tomas, VLC works perfect, I can view the encrypted channels now. One step closer to getting recorded tv on my PS3. Now I just need to figure out how to make VLC save the stream to disk. Thanks alot :-) ons, 11 03 2009 kl. 00:43 +0100, skrev Rasmus Pedersen: > > > > Hi Tomas > > Ahh, I had forgotten all about VLC. > > What options you use to get it working? > > Regards, > Rasmus > > ons, 11 03 2009 kl. 00:26 +0100, skrev Tomas Drajsajtl: > > > Hi Rasmus, > > the VLC media player records programs for me perfectly from the command > > line. If you have problems to give the correct options to it, don't hesitate > > to ask. > > > > Regards, > > Tomas > > > > > > ----- Original Message ----- > > From: "Rasmus Pedersen" <[email protected]> > > To: <[email protected]> > > Sent: Wednesday, March 11, 2009 12:19 AM > > Subject: [linux-dvb] KNC1 > > > > > > > Hi, > > > > > > I've got some problems getting my KNC1 DVB-C working correctly. > > > > > > The card is found correctly as > > ......... > > > My problem is that I want to record tv from the consol (I'm working on > > > script that can record television and expose it thru mediatomb to be > > > played on my PS3), and Kaffeine does not run without its UI. > > ......... > > > The problem is also there when using zap and dvbstreamer. I have not yet > > > tried mythtv or vdr, since I was hoping for a simpler solution using > > > gnutv or similar software to just dump the stream to disk (decrypted > > > ofcourse). > > > > > > I hope somebody might now what the problem could be.. > > > > > > Regards, > > > Rasmus Pedersen > > > > > > > > > > _______________________________________________ > linux-dvb users mailing list > For V4L/DVB development, please use instead [email protected] > [email protected] > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Quoted 8 lines
______________________________________________________________
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead
[email protected]
[email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead [email protected] [email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Hi Rasmus,
I haven't tested my HD channels yet, in fact there was nothing intersting I would like to record yet. ;-) All my favourite channels are still provided in MPEG-2 PAL. Try another mux= option or transcode. What about "mp4"? http://wiki.videolan.org/Codec#Muxers Maybe I will try it during the weekend.
Regards,
Tomas
----- Original Message -----
From: Rasmus Pedersen
To: [email protected]
Cc: [email protected]
Sent: Wednesday, March 11, 2009 10:48 PM
Subject: Re: [linux-dvb] KNC1
Hi Tomas
Thanks for the info. I successfully recorded various channels and played them on the PS3, so fare so good. :)
I only have a bit of trouble recording the h.264 channels. If I view them with VLC they work fin, but if I record them with VLC and then view them with VLC they get all pixelated.
The PS3 wont play them either, even tho it plays a h.264 stream recorded with Xine from the same channel.
I think I might be missing some setting when recording the h.264 stream, since it works perfecly when viewing live tv with VLC.
Regards,
Rasmus
ons, 11 03 2009 kl. 07:21 +0100, skrev Tomas Drajsajtl:
Hi Rasmus,
something like
vlc -vvv --color -I dummy --ts-es-id-pid --program=1 --dvb-adapter=0 dvb: --dvb-frequency=258000000 --dvb-srate=6900000 --dvb-modulation=64 --sout '#standard{access=file,mux=ts,dst="record.mpg"}'
does the job. Of course you need to pass your own DVB-C options.
Regards,
Tomas
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead [email protected] [email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Hi Tomas,
Our HD channels are very limited as well, I just thought it was strange that when I viewed the channel with VLC there was no errors, but when dumping it to disc (with vlc) and then viewing it produced alot of errors.
I might give the MP4 mux a go at some point, HD is not that important.
Again thanks alot for your help :)
Regards,
Rasmus
tor, 12 03 2009 kl. 12:31 +0100, skrev Tomas Drajsajtl:
Quoted 42 lines
Hi Rasmus,
I haven't tested my HD channels yet, in fact there was nothing intersting I would like to record yet. ;-) All my favourite channels are still provided in MPEG-2 PAL. Try another mux= option or transcode. What about "mp4"?
http://wiki.videolan.org/Codec#Muxers Maybe I will try it during the weekend.Regards,
Tomas----- Original Message -----
From: Rasmus Pedersen
To: [email protected]
Cc: [email protected]
Sent: Wednesday, March 11, 2009 10:48 PM
Subject: Re: [linux-dvb] KNC1Hi Tomas
Thanks for the info. I successfully recorded various channels and played them on the PS3, so fare so good. :)
I only have a bit of trouble recording the h.264 channels. If I view them with VLC they work fin, but if I record them with VLC and then view them with VLC they get all pixelated.
The PS3 wont play them either, even tho it plays a h.264 stream recorded with Xine from the same channel.
I think I might be missing some setting when recording the h.264 stream, since it works perfecly when viewing live tv with VLC.
Regards,
Rasmus
Quoted 12 lines
ons, 11 03 2009 kl. 07:21 +0100, skrev Tomas Drajsajtl:
>
> Hi Rasmus,
> something like
> vlc -vvv --color -I dummy --ts-es-id-pid --program=1 > --dvb-adapter=0 dvb: --dvb-frequency=258000000 > --dvb-srate=6900000 --dvb-modulation=64 --sout > '#standard{access=file,mux=ts,dst="record.mpg"}' > does the job. Of course you need to pass your own DVB-C > options.
> Regards,
> Tomas
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead [email protected] [email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb