V4L: em28xx: add support for Digitus/Plextor PX-AV200U grabbers
Subsystems (2)
PATCH 1/1 V4L: em28xx: add support for Digitus/Plextor PX-AV200U grabbers
From: Misha Zhilin <[email protected]>
Adds support for Digitus/Plextor PX-AV200U grabbers
---
drivers/media/video/em28xx/em28xx-cards.c +15 -0
@@ -1087,6 +1087,21 @@ .amux = EM28XX_AMUX_LINE_IN, } }, }, + [EM2820_BOARD_PLEXTOR_PX_AV200U ] = { + .name ="Plextor PX-AV200U" , + .valid =EM28XX_BOARD_NOT_VALIDATED , + .vchannels =2 , + .decoder =EM28XX_SAA7113 , + .input = { { + .type =EM28XX_VMUX_COMPOSITE1 , + .vmux =SAA7115_COMPOSITE0 , + .amux =EM28XX_AMUX_AC97_LINE_IN , + }, { + .type =EM28XX_VMUX_SVIDEO , + .vmux =SAA7115_SVIDEO3 , + .amux =EM28XX_AMUX_AC97_LINE_IN , + } }, + }, };const unsigned int em28xx_bcount =ARRAY_SIZE (em28xx_boards);
Binary files linux-2.6.27.x86_64.orig/drivers/media/video/em28xx/.em28xx-cards.c.swp and linux-2.6.27.x86_64.new/drivers/media/video/em28xx/.em28xx-cards.c.swp differ
drivers/media/video/em28xx/em28xx.h +2 -0
@@ -97,6 +97,8 @@#define EM2882_BOARD_PINNACLE_HYBRID_PRO 56#define EM2883_BOARD_KWORLD_HYBRID_A316 57#define EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU 58 +#define EM2820_BOARD_PLEXTOR_PX_AV200U 59 +/* Limits minimum and default number of buffers */ #define EM28XX_MIN_BUF 4
Documentation/video4linux/CARDLIST.em28xx +1 -0
@@ -57,3 +57,4 @@ 56 -> Pinnacle Hybrid Pro (2) (em2882) [2304:0226] 57 -> Kworld PlusTV HD Hybrid 330 (em2883) [eb1a:a316] 58 -> Compro VideoMate ForYou/Stereo (em2820/em2840) [185b:2041] + 59 -> Plextor PX-AV200U (em2880)
Quoted 53 lines · Mikhail Jiline
From: Misha Zhilin <[email protected]>
Adds support for Digitus/Plextor PX-AV200U grabbers
Signed-off-by Misha Zhilin <[email protected]>---
diff -urN
linux-2.6.27.x86_64.orig/drivers/media/video/em28xx/em28xx-cards.clinux-2.6.27.x86_64.new/drivers/media/video/em28xx/em28xx-cards.cdrivers/media/video/em28xx/em28xx-cards.c 2009-03-04 16:18:03.000000000 -0500 renamed from drivers/media/video/em28xx/em28xx-cards.c 2008-10-09 18:13:53.000000000 -0400 +15
-0@@ -1087,6 +1087,21 @@ .amux = EM28XX_AMUX_LINE_IN, } }, }, + [EM2820_BOARD_PLEXTOR_PX_AV200U] = { + .name = "Plextor PX-AV200U", + .valid = EM28XX_BOARD_NOT_VALIDATED, + .vchannels = 2, + .decoder = EM28XX_SAA7113, + .input = { { + .type = EM28XX_VMUX_COMPOSITE1, + .vmux = SAA7115_COMPOSITE0, + .amux = EM28XX_AMUX_AC97_LINE_IN, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = SAA7115_SVIDEO3, + .amux = EM28XX_AMUX_AC97_LINE_IN, + } }, + }, }; const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);Binary files linux-2.6.27.x86_64.orig/drivers/media/video/em28xx/.em28xx-cards.c.swp and linux-2.6.27.x86_64.new/drivers/media/video/em28xx/.em28xx-cards.c.swp differ diff -urN
linux-2.6.27.x86_64.orig/drivers/media/video/em28xx/em28xx.hlinux-2.6.27.x86_64.new/drivers/media/video/em28xx/em28xx.hdrivers/media/video/em28xx/em28xx.h 2009-03-04 15:33:24.000000000 -0500 renamed from drivers/media/video/em28xx/em28xx.h 2008-10-09 18:13:53.000000000 -0400 +2
-0@@ -97,6 +97,8 @@ #define EM2882_BOARD_PINNACLE_HYBRID_PRO 56 #define EM2883_BOARD_KWORLD_HYBRID_A316 57 #define EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU 58 +#define EM2820_BOARD_PLEXTOR_PX_AV200U 59 + /* Limits minimum and default number of buffers */ #define EM28XX_MIN_BUF 4diff -urN linux-2.6.27.x86_64.orig/Documentation/video4linux/CARDLIST.em28xx linux-2.6.27.x86_64.new/Documentation/video4linux/CARDLIST.em28xx
Documentation/video4linux/CARDLIST.em28xx 2009-03-18 11:15:00.000000000 -0400 renamed from Documentation/video4linux/CARDLIST.em28xx 2008-10-09 18:13:53.000000000 -0400 +0
-0@@ -57,3 +57,4 @@56 -> Pinnacle Hybrid Pro (2) (em2882) [2304:0226] 57 -> Kworld PlusTV HD Hybrid 330 (em2883) [eb1a:a316] 58 -> Compro VideoMate ForYou/Stereo (em2820/em2840) [185b:2041]
+ 59 -> Plextor PX-AV200U (em2880)
Quoted 6 lines
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Is this patch incomplete? Where is the registration for the USB ID of the device?
Devin
Signature · 3 lines
Devin J. Heitmueller http://www.devinheitmueller.com AIM: devinheitmueller
Quoted 54 lines · Devin Heitmueller
Quoted 53 lines · Mikhail Jiline
From: Misha Zhilin <[email protected]>
Adds support for Digitus/Plextor PX-AV200U grabbers
Signed-off-by Misha Zhilin <[email protected]>---
diff -urN
linux-2.6.27.x86_64.orig/drivers/media/video/em28xx/em28xx-cards.clinux-2.6.27.x86_64.new/drivers/media/video/em28xx/em28xx-cards.cdrivers/media/video/em28xx/em28xx-cards.c 2009-03-04 16:18:03.000000000 -0500 renamed from drivers/media/video/em28xx/em28xx-cards.c 2008-10-09 18:13:53.000000000 -0400 +15
-0@@ -1087,6 +1087,21 @@ .amux = EM28XX_AMUX_LINE_IN, } }, }, + [EM2820_BOARD_PLEXTOR_PX_AV200U] = { + .name = "Plextor PX-AV200U", + .valid = EM28XX_BOARD_NOT_VALIDATED, + .vchannels = 2, + .decoder = EM28XX_SAA7113, + .input = { { + .type = EM28XX_VMUX_COMPOSITE1, + .vmux = SAA7115_COMPOSITE0, + .amux = EM28XX_AMUX_AC97_LINE_IN, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = SAA7115_SVIDEO3, + .amux = EM28XX_AMUX_AC97_LINE_IN, + } }, + }, }; const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);Binary files linux-2.6.27.x86_64.orig/drivers/media/video/em28xx/.em28xx-cards.c.swp and linux-2.6.27.x86_64.new/drivers/media/video/em28xx/.em28xx-cards.c.swp differ diff -urN
linux-2.6.27.x86_64.orig/drivers/media/video/em28xx/em28xx.hlinux-2.6.27.x86_64.new/drivers/media/video/em28xx/em28xx.hdrivers/media/video/em28xx/em28xx.h 2009-03-04 15:33:24.000000000 -0500 renamed from drivers/media/video/em28xx/em28xx.h 2008-10-09 18:13:53.000000000 -0400 +2
-0@@ -97,6 +97,8 @@ #define EM2882_BOARD_PINNACLE_HYBRID_PRO 56 #define EM2883_BOARD_KWORLD_HYBRID_A316 57 #define EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU 58 +#define EM2820_BOARD_PLEXTOR_PX_AV200U 59 + /* Limits minimum and default number of buffers */ #define EM28XX_MIN_BUF 4diff -urN linux-2.6.27.x86_64.orig/Documentation/video4linux/CARDLIST.em28xx linux-2.6.27.x86_64.new/Documentation/video4linux/CARDLIST.em28xx
Documentation/video4linux/CARDLIST.em28xx 2009-03-18 11:15:00.000000000 -0400 renamed from Documentation/video4linux/CARDLIST.em28xx 2008-10-09 18:13:53.000000000 -0400 +1
-0@@ -57,3 +57,4 @@ 56 -> Pinnacle Hybrid Pro (2) (em2882) [2304:0226] 57 -> Kworld PlusTV HD Hybrid 330 (em2883) [eb1a:a316] 58 -> Compro VideoMate ForYou/Stereo (em2820/em2840) [185b:2041] + 59 -> Plextor PX-AV200U (em2880)
Quoted 4 lines
Quoted 1 line
--
Is this patch incomplete? Where is the registration for the USB ID of the device?
The patch is complete. This device (as many others) doesn't have unique VID/PID, it uses generic eb1a:2821, which is already associated with ex28xx (see drivers/media/video/em28xx/em28xx-cards.c:1103)
Regards,
Misha.
Quoted 9 lines · Mikhail Jiline
Quoted 2 lines
Is this patch incomplete? Where is the registration for the USB ID of the device?
The patch is complete. This device (as many others) doesn't have unique VID/PID, it uses generic eb1a:2821, which is already associated with ex28xx (see
drivers/media/video/em28xx/em28xx-cards.c:1103)Regards,
Misha.
Yeah, something still seems wrong here. In cases where the device uses one of the Empia generic USB ids, you need to have either an i2c hash entry of an eeprom hash entry. That's how it knows which device to associate it with in those cases.
Did you try this patch? If so, can you send the full dmesg output after connecting the device?
Devin
Signature · 3 lines
Devin J. Heitmueller http://www.devinheitmueller.com AIM: devinheitmueller
Quoted 9 lines
Yeah, something still seems wrong here. In cases where the device uses one of the Empia generic USB ids, you need to have either an i2c hash entry of an eeprom hash entry. That's how it knows which device to associate it with in those cases.
Did you try this patch? If so, can you send the full dmesg output after connecting the device?
If I don't force card id via module params, I get the following
[ 19.699849] em28xx 1-1.2:1.0: usb_probe_interface [ 19.699867] em28xx 1-1.2:1.0: usb_probe_interface - got id [ 19.699883] em28xx new video device (1aeb:2128): interface 0, class 255 [ 19.706528] em28xx Has usb audio class [ 19.710319] em28xx #0: Alternate settings: 8 [ 19.714604] em28xx #0: Alternate setting 0, max size= 0 [ 19.719826] em28xx #0: Alternate setting 1, max size= 1024 [ 19.725302] em28xx #0: Alternate setting 2, max size= 1448 [ 19.730778] em28xx #0: Alternate setting 3, max size= 2048 [ 19.736255] em28xx #0: Alternate setting 4, max size= 2304 [ 19.741734] em28xx #0: Alternate setting 5, max size= 2580 [ 19.747211] em28xx #0: Alternate setting 6, max size= 2892 [ 19.752688] em28xx #0: Alternate setting 7, max size= 3072 [ 19.758498] em28xx #0: em28xx chip ID = 18 [ 20.357669] saa7115' 0-0025: saa7113 found (1f7113d0e100000) @ 0x4a (em28xx #0) [ 21.109479] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 21 28 90 00 11 03 6a 22 00 00 [ 21.117619] em28xx #0: i2c eeprom 10: 00 00 04 57 06 21 01 00 00 00 00 00 00 00 00 00 [ 21.125767] em28xx #0: i2c eeprom 20: 02 00 01 01 f0 10 00 00 00 00 00 00 5b 00 00 00 [ 21.133870] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 01 03 01 00 00 00 00 [ 21.141974] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 21.150071] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 21.158184] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 22 03 55 00 53 00 [ 21.166296] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 32 00 31 00 20 00 44 00 [ 21.174487] em28xx #0: i2c eeprom 80: 65 00 76 00 69 00 63 00 65 00 00 00 00 00 00 00 [ 21.182600] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 21.190714] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 21.198826] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 21.206939] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 21.215043] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 21.223139] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 21.231243] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 21.239348] EEPROM ID= 0x1aeb6795, hash = 0x00000000 [ 21.244305] Vendor/Product ID= 1aeb:2128 [ 21.248218] No audio on board. [ 21.251269] 500mA max power [ 21.254062] Table at 0x04, strings=0x6a22, 0x0000, 0x0000 [ 21.273860] em28xx #0: found i2c device @ 0x4a [saa7113h] [ 21.295311] em28xx #0: found i2c device @ 0xa0 [eeprom] [ 21.318136] em28xx #0: Your board has no unique USB ID and thus need a hint to be detected. [ 21.326495] em28xx #0: You may try to use card=<n> insmod option to workaround that. [ 21.334250] em28xx #0: Please send an email with this log to: [ 21.339992] em28xx #0: V4L Mailing List <[email protected]> [ 21.346500] em28xx #0: Board eeprom hash is 0x00000000 [ 21.351633] em28xx #0: Board i2c devicelist hash is 0x6ba50080 [ 21.357457] em28xx #0: Here is a list of valid choices for the card=<n> insmod option: [ 21.365354] em28xx #0: card=0 -> Unknown EM2800 video grabber [ 21.371435] em28xx #0: card=1 -> Unknown EM2750/28xx video grabber [ 21.377951] em28xx #0: card=2 -> Terratec Cinergy 250 USB [ 21.383686] em28xx #0: card=3 -> Pinnacle PCTV USB 2 [ 21.389094] em28xx #0: card=4 -> Hauppauge WinTV USB 2 [ 21.394565] em28xx #0: card=5 -> MSI VOX USB 2.0 [ 21.399524] em28xx #0: card=6 -> Terratec Cinergy 200 USB [ 21.405264] em28xx #0: card=7 -> Leadtek Winfast USB II [ 21.410824] em28xx #0: card=8 -> Kworld USB2800 [ 21.415689] em28xx #0: card=9 -> Pinnacle Dazzle DVC 90/DVC 100 [ 21.421945] em28xx #0: card=10 -> Hauppauge WinTV HVR 900 [ 21.427681] em28xx #0: card=11 -> Terratec Hybrid XS [ 21.432977] em28xx #0: card=12 -> Kworld PVR TV 2800 RF [ 21.438534] em28xx #0: card=13 -> Terratec Prodigy XS [ 21.443925] em28xx #0: card=14 -> Pixelview Prolink PlayTV USB 2.0 [ 21.450440] em28xx #0: card=15 -> V-Gear PocketTV [ 21.455485] em28xx #0: card=16 -> Hauppauge WinTV HVR 950 [ 21.461222] em28xx #0: card=17 -> Pinnacle PCTV HD Pro Stick [ 21.467218] em28xx #0: card=18 -> Hauppauge WinTV HVR 900 (R2) [ 21.473388] em28xx #0: card=19 -> PointNix Intra-Oral Camera [ 21.479383] em28xx #0: card=20 -> AMD ATI TV Wonder HD 600 [ 21.485407] em28xx #0: card=21 -> eMPIA Technology, Inc. GrabBeeX+ Video Encoder [ 21.493130] em28xx #0: card=22 -> Unknown EM2750/EM2751 webcam grabber [ 21.499989] em28xx #0: card=23 -> Huaqi DLCW-130 [ 21.504940] em28xx #0: card=24 -> D-Link DUB-T210 TV Tuner [ 21.510764] em28xx #0: card=25 -> Gadmei UTV310 [ 21.515636] em28xx #0: card=26 -> Hercules Smart TV USB 2.0 [ 21.521548] em28xx #0: card=27 -> Pinnacle PCTV USB 2 (Philips FM1216ME) [ 21.528580] em28xx #0: card=28 -> Leadtek Winfast USB II Deluxe [ 21.534835] em28xx #0: card=29 -> Pinnacle Dazzle DVC 100 [ 21.540572] em28xx #0: card=30 -> Videology 20K14XUSB USB2.0 [ 21.546569] em28xx #0: card=31 -> Usbgear VD204v9 [ 21.551613] em28xx #0: card=32 -> Supercomp USB 2.0 TV [ 21.557083] em28xx #0: card=33 -> SIIG AVTuner-PVR/Prolink PlayTV USB 2.0 [ 21.564202] em28xx #0: card=34 -> Terratec Cinergy A Hybrid XS [ 21.570371] em28xx #0: card=35 -> Typhoon DVD Maker [ 21.575589] em28xx #0: card=36 -> NetGMBH Cam [ 21.580280] em28xx #0: card=37 -> Gadmei UTV330 [ 21.585145] em28xx #0: card=38 -> Yakumo MovieMixer [ 21.590547] em28xx #0: card=39 -> KWorld PVRTV 300U [ 21.595763] em28xx #0: card=40 -> Plextor ConvertX PX-TV100U [ 21.601760] em28xx #0: card=41 -> Kworld 350 U DVB-T [ 21.607064] em28xx #0: card=42 -> Kworld 355 U DVB-T [ 21.612361] em28xx #0: card=43 -> Terratec Cinergy T XS [ 21.617926] em28xx #0: card=44 -> Terratec Cinergy T XS (MT2060) [ 21.624267] em28xx #0: card=45 -> Pinnacle PCTV DVB-T [ 21.629650] em28xx #0: card=46 -> Compro, VideoMate U3 [ 21.635128] em28xx #0: card=47 -> KWorld DVB-T 305U [ 21.640346] em28xx #0: card=48 -> KWorld DVB-T 310U [ 21.645566] em28xx #0: card=49 -> MSI DigiVox A/D [ 21.650611] em28xx #0: card=50 -> MSI DigiVox A/D II [ 21.655915] em28xx #0: card=51 -> Terratec Hybrid XS Secam [ 21.661740] em28xx #0: card=52 -> DNT DA2 Hybrid [ 21.666698] em28xx #0: card=53 -> Pinnacle Hybrid Pro [ 21.672089] em28xx #0: card=54 -> Kworld VS-DVB-T 323UR [ 21.677654] em28xx #0: card=55 -> Terratec Hybrid XS (em2882) [ 21.683736] em28xx #0: card=56 -> Pinnacle Hybrid Pro (2) [ 21.689655] em28xx #0: card=57 -> Kworld PlusTV HD Hybrid 330 [ 21.695737] em28xx #0: card=58 -> Compro VideoMate ForYou/Stereo [ 21.702079] em28xx #0: card=59 -> Plextor PX-AV200U [ 22.277385] em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0 [ 22.284272] em28xx #0: Found Unknown EM2750/28xx video grabber
Quoted 111 lines · Mikhail Jiline
Quoted 9 lines
Yeah, something still seems wrong here. In cases where the device uses one of the Empia generic USB ids, you need to have either an i2c hash entry of an eeprom hash entry. That's how it knows which device to associate it with in those cases.
Did you try this patch? If so, can you send the full dmesg output after connecting the device?
If I don't force card id via module params, I get the following
[ 19.699849] em28xx 1-1.2:1.0:
usb_probe_interface
[ 19.699867] em28xx 1-1.2:1.0:usb_probe_interface- got id
[ 19.699883] em28xx new video device (1aeb:2128): interface 0, class 255
[ 19.706528] em28xx Has usb audio class
[ 19.710319] em28xx #0: Alternate settings: 8
[ 19.714604] em28xx #0: Alternate setting 0, max size= 0
[ 19.719826] em28xx #0: Alternate setting 1, max size= 1024
[ 19.725302] em28xx #0: Alternate setting 2, max size= 1448
[ 19.730778] em28xx #0: Alternate setting 3, max size= 2048
[ 19.736255] em28xx #0: Alternate setting 4, max size= 2304
[ 19.741734] em28xx #0: Alternate setting 5, max size= 2580
[ 19.747211] em28xx #0: Alternate setting 6, max size= 2892
[ 19.752688] em28xx #0: Alternate setting 7, max size= 3072
[ 19.758498] em28xx #0: em28xx chip ID = 18
[ 20.357669] saa7115' 0-0025: saa7113 found (1f7113d0e100000) @0x4a(em28xx #0) [ 21.109479] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 21 28 90 00 11 03 6a 22 00 00 [ 21.117619] em28xx #0: i2c eeprom 10: 00 00 04 57 06 21 01 00 00 00 00 00 00 00 00 00 [ 21.125767] em28xx #0: i2c eeprom 20: 02 00 01 01 f0 10 00 00 00 00 00 00 5b 00 00 00 [ 21.133870] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 01 03 01 00 00 00 00 [ 21.141974] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 21.150071] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 21.158184] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 22 03 55 00 53 00 [ 21.166296] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 32 00 31 00 20 00 44 00 [ 21.174487] em28xx #0: i2c eeprom 80: 65 00 76 00 69 00 63 00 65 00 00 00 00 00 00 00 [ 21.182600] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 21.190714] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 21.198826] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 21.206939] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 21.215043] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 21.223139] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 21.231243] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 21.239348] EEPROM ID=0x1aeb6795, hash =0x00000000
[ 21.244305] Vendor/Product ID= 1aeb:2128
[ 21.248218] No audio on board.
[ 21.251269] 500mA max power
[ 21.254062] Table at0x04, strings=0x6a22,0x0000,0x0000
[ 21.273860] em28xx #0: found i2c device @0x4a[saa7113h]
[ 21.295311] em28xx #0: found i2c device @0xa0[eeprom]
[ 21.318136] em28xx #0: Your board has no unique USB ID and thus need a hint to be detected. [ 21.326495] em28xx #0: You may try to use card=<n> insmod option to workaround that. [ 21.334250] em28xx #0: Please send an email with this log to:
[ 21.339992] em28xx #0: V4L Mailing List <[email protected]> [ 21.346500] em28xx #0: Board eeprom hash is0x00000000
[ 21.351633] em28xx #0: Board i2c devicelist hash is0x6ba50080
[ 21.357457] em28xx #0: Here is a list of valid choices for the card=<n> insmod option:
[ 21.365354] em28xx #0: card=0 -> Unknown EM2800 video grabber
[ 21.371435] em28xx #0: card=1 -> Unknown EM2750/28xx video grabber
[ 21.377951] em28xx #0: card=2 -> Terratec Cinergy 250 USB
[ 21.383686] em28xx #0: card=3 -> Pinnacle PCTV USB 2
[ 21.389094] em28xx #0: card=4 -> Hauppauge WinTV USB 2
[ 21.394565] em28xx #0: card=5 -> MSI VOX USB 2.0
[ 21.399524] em28xx #0: card=6 -> Terratec Cinergy 200 USB
[ 21.405264] em28xx #0: card=7 -> Leadtek Winfast USB II
[ 21.410824] em28xx #0: card=8 -> Kworld USB2800
[ 21.415689] em28xx #0: card=9 -> Pinnacle Dazzle DVC 90/DVC 100
[ 21.421945] em28xx #0: card=10 -> Hauppauge WinTV HVR 900
[ 21.427681] em28xx #0: card=11 -> Terratec Hybrid XS
[ 21.432977] em28xx #0: card=12 -> Kworld PVR TV 2800 RF
[ 21.438534] em28xx #0: card=13 -> Terratec Prodigy XS
[ 21.443925] em28xx #0: card=14 -> Pixelview Prolink PlayTV USB 2.0
[ 21.450440] em28xx #0: card=15 -> V-Gear PocketTV
[ 21.455485] em28xx #0: card=16 -> Hauppauge WinTV HVR 950
[ 21.461222] em28xx #0: card=17 -> Pinnacle PCTV HD Pro Stick
[ 21.467218] em28xx #0: card=18 -> Hauppauge WinTV HVR 900 (R2)
[ 21.473388] em28xx #0: card=19 -> PointNix Intra-Oral Camera
[ 21.479383] em28xx #0: card=20 -> AMD ATI TV Wonder HD 600
[ 21.485407] em28xx #0: card=21 -> eMPIA Technology, Inc. GrabBeeX+ Video Encoder [ 21.493130] em28xx #0: card=22 -> Unknown EM2750/EM2751 webcam grabber
[ 21.499989] em28xx #0: card=23 -> Huaqi DLCW-130
[ 21.504940] em28xx #0: card=24 -> D-Link DUB-T210 TV Tuner
[ 21.510764] em28xx #0: card=25 -> Gadmei UTV310
[ 21.515636] em28xx #0: card=26 -> Hercules Smart TV USB 2.0
[ 21.521548] em28xx #0: card=27 -> Pinnacle PCTV USB 2 (Philips FM1216ME) [ 21.528580] em28xx #0: card=28 -> Leadtek Winfast USB II Deluxe
[ 21.534835] em28xx #0: card=29 -> Pinnacle Dazzle DVC 100
[ 21.540572] em28xx #0: card=30 -> Videology 20K14XUSB USB2.0
[ 21.546569] em28xx #0: card=31 -> Usbgear VD204v9
[ 21.551613] em28xx #0: card=32 -> Supercomp USB 2.0 TV
[ 21.557083] em28xx #0: card=33 -> SIIG AVTuner-PVR/Prolink PlayTV USB 2.0 [ 21.564202] em28xx #0: card=34 -> Terratec Cinergy A Hybrid XS
[ 21.570371] em28xx #0: card=35 -> Typhoon DVD Maker
[ 21.575589] em28xx #0: card=36 -> NetGMBH Cam
[ 21.580280] em28xx #0: card=37 -> Gadmei UTV330
[ 21.585145] em28xx #0: card=38 -> Yakumo MovieMixer
[ 21.590547] em28xx #0: card=39 -> KWorld PVRTV 300U
[ 21.595763] em28xx #0: card=40 -> Plextor ConvertX PX-TV100U
[ 21.601760] em28xx #0: card=41 -> Kworld 350 U DVB-T
[ 21.607064] em28xx #0: card=42 -> Kworld 355 U DVB-T
[ 21.612361] em28xx #0: card=43 -> Terratec Cinergy T XS
[ 21.617926] em28xx #0: card=44 -> Terratec Cinergy T XS (MT2060)
[ 21.624267] em28xx #0: card=45 -> Pinnacle PCTV DVB-T
[ 21.629650] em28xx #0: card=46 -> Compro, VideoMate U3
[ 21.635128] em28xx #0: card=47 -> KWorld DVB-T 305U
[ 21.640346] em28xx #0: card=48 -> KWorld DVB-T 310U
[ 21.645566] em28xx #0: card=49 -> MSI DigiVox A/D
[ 21.650611] em28xx #0: card=50 -> MSI DigiVox A/D II
[ 21.655915] em28xx #0: card=51 -> Terratec Hybrid XS Secam
[ 21.661740] em28xx #0: card=52 -> DNT DA2 Hybrid
[ 21.666698] em28xx #0: card=53 -> Pinnacle Hybrid Pro
Quoted 11 lines
[ 21.672089] em28xx #0: card=54 -> Kworld VS-DVB-T 323UR
[ 21.677654] em28xx #0: card=55 -> Terratec Hybrid XS (em2882) [ 21.683736] em28xx #0: card=56 -> Pinnacle Hybrid Pro (2) [ 21.689655] em28xx #0: card=57 -> Kworld PlusTV HD Hybrid 330 [ 21.695737] em28xx #0: card=58 -> Compro VideoMate ForYou/Stereo [ 21.702079] em28xx #0: card=59 -> Plextor PX-AV200U
[ 22.277385] em28xx #0: V4L2 device registered as/dev/video0and/dev/vbi0[ 22.284272] em28xx #0: Found Unknown EM2750/28xx video grabber
Ok, here's the problem. Yeah, please do not submit profiles that require a card= specification. Instead, please resubmit your patch including an entry in the em28xx_i2c_hash[] table that includes your device. It probably needs to look something like the following:
{0x6ba50080, EM2820_BOARD_PLEXTOR_PX_AV200U, TUNER_LG_PAL_NEW_TAPC},
I am curious though why your eeprom hash is blank even though it successfully dumped out the eeprom.
Devin
Signature · 8 lines
Devin J. Heitmueller http://www.devinheitmueller.com AIM: devinheitmueller -- video4linux-list mailing list Unsubscribe mailto:[email protected]?subject=unsubscribe https://www.redhat.com/mailman/listinfo/video4linux-list
Devin,
Quoted 4 lines
Ok, here's the problem. Yeah, please do not submit profiles that require a card= specification. Instead, please resubmit your patch including an entry in the em28xx_i2c_hash[] table that includes your device. It probably needs to look something like the following:
Here is the output from the version with em28xx_i2c_hash hint. Update patch is below.
Mar 23 09:13:57 T60p kernel: usb 1-5: new high speed USB device using ehci_hcd and address 9 Mar 23 09:13:57 T60p kernel: usb 1-5: configuration #1 chosen from 1 choice Mar 23 09:13:57 T60p kernel: em28xx new video device (eb1a:2821): interface 0, class 255 Mar 23 09:13:57 T60p kernel: em28xx Has usb audio class Mar 23 09:13:57 T60p kernel: em28xx #0: Alternate settings: 8 Mar 23 09:13:57 T60p kernel: em28xx #0: Alternate setting 0, max size= 0 Mar 23 09:13:57 T60p kernel: em28xx #0: Alternate setting 1, max size= 1024 Mar 23 09:13:57 T60p kernel: em28xx #0: Alternate setting 2, max size= 1448 Mar 23 09:13:57 T60p kernel: em28xx #0: Alternate setting 3, max size= 2048 Mar 23 09:13:57 T60p kernel: em28xx #0: Alternate setting 4, max size= 2304 Mar 23 09:13:57 T60p kernel: em28xx #0: Alternate setting 5, max size= 2580 Mar 23 09:13:57 T60p kernel: em28xx #0: Alternate setting 6, max size= 2892 Mar 23 09:13:57 T60p kernel: em28xx #0: Alternate setting 7, max size= 3072 Mar 23 09:13:57 T60p kernel: em28xx #0: em28xx chip ID = 18 Mar 23 09:13:57 T60p kernel: em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 21 28 90 00 11 03 6a 22 00 00 Mar 23 09:13:57 T60p kernel: em28xx #0: i2c eeprom 10: 00 00 04 57 06 21 01 00 00 00 00 00 00 00 00 00 Mar 23 09:13:57 T60p kernel: em28xx #0: i2c eeprom 20: 02 00 01 01 f0 10 00 00 00 00 00 00 5b 00 00 00 Mar 23 09:13:57 T60p kernel: em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 01 03 01 00 00 00 00 Mar 23 09:13:57 T60p kernel: em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Mar 23 09:13:57 T60p kernel: em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Mar 23 09:13:57 T60p kernel: em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 22 03 55 00 53 00 Mar 23 09:13:57 T60p kernel: em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 32 00 31 00 20 00 44 00 Mar 23 09:13:57 T60p kernel: em28xx #0: i2c eeprom 80: 65 00 76 00 69 00 63 00 65 00 00 00 00 00 00 00 Mar 23 09:13:57 T60p kernel: em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Mar 23 09:13:57 T60p kernel: em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Mar 23 09:13:57 T60p kernel: em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Mar 23 09:13:57 T60p kernel: em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Mar 23 09:13:57 T60p kernel: em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Mar 23 09:13:57 T60p kernel: em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Mar 23 09:13:57 T60p kernel: em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Mar 23 09:13:57 T60p kernel: EEPROM ID= 0x9567eb1a, hash = 0x37da7b8a Mar 23 09:13:57 T60p kernel: Vendor/Product ID= eb1a:2821 Mar 23 09:13:57 T60p kernel: AC97 audio (5 sample rates) Mar 23 09:13:57 T60p kernel: 500mA max power Mar 23 09:13:57 T60p kernel: Table at 0x04, strings=0x226a, 0x0000, 0x0000 Mar 23 09:13:57 T60p kernel: em28xx #0: found i2c device @ 0x4a [saa7113h] Mar 23 09:13:57 T60p kernel: em28xx #0: found i2c device @ 0xa0 [eeprom] Mar 23 09:13:57 T60p kernel: em28xx #0: Your board has no unique USB ID. Mar 23 09:13:57 T60p kernel: em28xx #0: A hint were successfully done, based on i2c devicelist hash. Mar 23 09:13:57 T60p kernel: em28xx #0: This method is not 100% failproof. Mar 23 09:13:57 T60p kernel: em28xx #0: If the board were missdetected, please email this log to: Mar 23 09:13:57 T60p kernel: em28xx #0: V4L Mailing List <[email protected]> Mar 23 09:13:57 T60p kernel: em28xx #0: Board detected as Plextor PX-AV200U Mar 23 09:13:57 T60p kernel: em28xx #0: Mar 23 09:13:57 T60p kernel: Mar 23 09:13:57 T60p kernel: em28xx #0: The support for this board weren't valid yet. Mar 23 09:13:57 T60p kernel: em28xx #0: Please send a report of having this working Mar 23 09:13:57 T60p kernel: em28xx #0: not to V4L mailing list (and/or to other addresses) Mar 23 09:13:57 T60p kernel: Mar 23 09:13:58 T60p kernel: saa7115' 1-0025: saa7113 found (1f7113d0e100000) @ 0x4a (em28xx #0) Mar 23 09:13:58 T60p kernel: em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0 Mar 23 09:13:58 T60p kernel: em28xx #0: Found Plextor PX-AV200U Mar 23 09:13:58 T60p kernel: usb 1-5: New USB device found, idVendor=eb1a, idProduct=2821 Mar 23 09:13:58 T60p kernel: usb 1-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0 Mar 23 09:13:58 T60p kernel: usb 1-5: Product: USB 2821 Device
From: Misha Zhilin <[email protected]>
Adds support for Digitus/Plextor PX-AV200U grabbers
---
drivers/media/video/em28xx/em28xx-cards.c +16 -0
@@ -1087,6 +1087,21 @@ .amux = EM28XX_AMUX_LINE_IN, } }, }, + [EM2820_BOARD_PLEXTOR_PX_AV200U ] = { + .name ="Plextor PX-AV200U" , + .valid =EM28XX_BOARD_NOT_VALIDATED , + .vchannels =2 , + .decoder =EM28XX_SAA7113 , + .input = { { + .type =EM28XX_VMUX_COMPOSITE1 , + .vmux =SAA7115_COMPOSITE0 , + .amux =EM28XX_AMUX_AC97_LINE_IN , + }, { + .type =EM28XX_VMUX_SVIDEO , + .vmux =SAA7115_SVIDEO3 , + .amux =EM28XX_AMUX_AC97_LINE_IN , + } }, + }, };const unsigned int em28xx_bcount =ARRAY_SIZE (em28xx_boards);
@@ -1269,6 +1284,7 @@ {0xb06a32c3, EM2800_BOARD_TERRATEC_CINERGY_200, TUNER_LG_PAL_NEW_TAPC}, {0xf51200e3, EM2800_BOARD_VGEAR_POCKETTV, TUNER_LG_PAL_NEW_TAPC}, {0x1ba50080, EM2860_BOARD_POINTNIX_INTRAORAL_CAMERA, TUNER_ABSENT}, + {0x6ba50080, EM2820_BOARD_PLEXTOR_PX_AV200U, TUNER_ABSENT}, };int em28xx_tuner_callback (void *ptr,int command,int arg)
drivers/media/video/em28xx/em28xx.h +2 -0
@@ -97,6 +97,8 @@#define EM2882_BOARD_PINNACLE_HYBRID_PRO 56#define EM2883_BOARD_KWORLD_HYBRID_A316 57#define EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU 58 +#define EM2820_BOARD_PLEXTOR_PX_AV200U 59 +/* Limits minimum and default number of buffers */ #define EM28XX_MIN_BUF 4
Documentation/video4linux/CARDLIST.em28xx +1 -0
@@ -57,3 +57,4 @@ 56 -> Pinnacle Hybrid Pro (2) (em2882) [2304:0226] 57 -> Kworld PlusTV HD Hybrid 330 (em2883) [eb1a:a316] 58 -> Compro VideoMate ForYou/Stereo (em2820/em2840) [185b:2041] + 59 -> Plextor PX-AV200U (em2880)
Quoted 1 line · Mikhail Jiline
Here is the output from the version with
em28xx_i2c_hashhint. Update patch is below.
<snip>
Ok, that looks better. You should no longer need the "card=" line with that patch.
Did you verify that both video inputs were working as expected? Also, did you confirm the audio support works? If so, please remove the
"valid = EM28XX_BOARD_NOT_VALIDATED", submit a final patch, and
I will check it in.
Thanks,
Devin
Signature · 3 lines
Devin J. Heitmueller http://www.devinheitmueller.com AIM: devinheitmueller
Quoted 4 lines
Did you verify that both video inputs were working as expected? Also, did you confirm the audio support works?
Yes, audio, composite and s-video are functional.
From: Misha Zhilin <[email protected]>
Adds support for Digitus/Plextor PX-AV200U grabbers
---
drivers/media/video/em28xx/em28xx-cards.c +16 -0
@@ -1087,6 +1087,21 @@ .amux = EM28XX_AMUX_LINE_IN, } }, }, + [EM2820_BOARD_PLEXTOR_PX_AV200U ] = { + .name ="Plextor PX-AV200U" , + .vchannels =2 , + .tuner_type =TUNER_ABSENT , + .decoder =EM28XX_SAA7113 , + .input = { { + .type =EM28XX_VMUX_COMPOSITE1 , + .vmux =SAA7115_COMPOSITE0 , + .amux =EM28XX_AMUX_AC97_LINE_IN , + }, { + .type =EM28XX_VMUX_SVIDEO , + .vmux =SAA7115_SVIDEO3 , + .amux =EM28XX_AMUX_AC97_LINE_IN , + } }, + }, };const unsigned int em28xx_bcount =ARRAY_SIZE (em28xx_boards);
@@ -1269,6 +1284,7 @@ {0xb06a32c3, EM2800_BOARD_TERRATEC_CINERGY_200, TUNER_LG_PAL_NEW_TAPC}, {0xf51200e3, EM2800_BOARD_VGEAR_POCKETTV, TUNER_LG_PAL_NEW_TAPC}, {0x1ba50080, EM2860_BOARD_POINTNIX_INTRAORAL_CAMERA, TUNER_ABSENT}, + {0x6ba50080, EM2820_BOARD_PLEXTOR_PX_AV200U, TUNER_ABSENT}, };int em28xx_tuner_callback (void *ptr,int command,int arg)
drivers/media/video/em28xx/em28xx.h +1 -0
@@ -97,6 +97,7 @@#define EM2882_BOARD_PINNACLE_HYBRID_PRO 56#define EM2883_BOARD_KWORLD_HYBRID_A316 57#define EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU 58 +#define EM2820_BOARD_PLEXTOR_PX_AV200U 59/* Limits minimum and default number of buffers */ #define EM28XX_MIN_BUF 4
Documentation/video4linux/CARDLIST.em28xx +1 -0
@@ -57,3 +57,4 @@ 56 -> Pinnacle Hybrid Pro (2) (em2882) [2304:0226] 57 -> Kworld PlusTV HD Hybrid 330 (em2883) [eb1a:a316] 58 -> Compro VideoMate ForYou/Stereo (em2820/em2840) [185b:2041] + 59 -> Plextor PX-AV200U (em2880)