ZOOM2 Add initial support for Zoom2
PATCH 1/1 ZOOM2 Add initial support for Zoom2
Zoom2 is a new board from Texas Instruments and LogicPD This is the product description
http://www.logicpd.com/products/development-kits/texas-instruments-zoom%E2%84%A2-omap34x-ii-mdp
This patch provides a zoom2 base target by copying zoom1 and by making some obvious changes. This target compiles but does not yet run.
To configure, run
make omap3_zoom2_config
Signed-off-by Tom Rix <[email protected]>
--- MAINTAINERS | 4 + MAKEALL | 1 + Makefile | 3 + board/omap3/common/Makefile | 1 + board/omap3/zoom2/Makefile | 49 ++++++ board/omap3/zoom2/config.mk | 33 ++++ board/omap3/zoom2/u-boot.lds | 63 ++++++++ board/omap3/zoom2/zoom2.c | 79 ++++++++++ board/omap3/zoom2/zoom2.h | 134 +++++++++++++++++ include/configs/omap3_zoom2.h | 328 +++++++++++++++++++++++++++++++++++++++++ 10 files changed, 695 insertions(+), 0 deletions(-) create mode 100644 board/omap3/zoom2/Makefile create mode 100644 board/omap3/zoom2/config.mk create mode 100644 board/omap3/zoom2/u-boot.lds create mode 100644 board/omap3/zoom2/zoom2.c create mode 100644 board/omap3/zoom2/zoom2.h create mode 100644 include/configs/omap3_zoom2.h
MAINTAINERS +4 -0
@@ -610,6 +610,10 @@ Stelian Pop <[email protected]> at91sam9263ek ARM926EJS (AT91SAM9263 SoC) at91sam9rlek ARM926EJS (AT91SAM9RL SoC) +Tom Rix <[email protected]> + + omap3_zoom2 ARM CORTEX-A8 (OMAP3xx SoC) + Stefan Roese <[email protected]> ixdpg425 xscale
MAKEALL +1 -0
@@ -560,6 +560,7 @@ LIST_ARM_CORTEX_A8=" \ omap3_evm \ omap3_pandora \ omap3_zoom1 \ + omap3_zoom2 \ " #########################################################################
Makefile +3 -0
@@ -2971,6 +2971,9 @@ omap3_pandora_config : unconfig omap3_zoom1_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom1 omap3 omap3 +omap3_zoom2_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom2 omap3 omap3 + ######################################################################### ## XScale Systems #########################################################################
board/omap3/common/Makefile +1 -0
@@ -33,6 +33,7 @@ COBJS-$(CONFIG_OMAP3_BEAGLE) += power.o COBJS-$(CONFIG_OMAP3_OVERO) += power.o COBJS-$(CONFIG_OMAP3_PANDORA) += power.o COBJS-$(CONFIG_OMAP3_ZOOM1) += power.o +COBJS-$(CONFIG_OMAP3_ZOOM2) += power.o COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c)
board/omap3/zoom2/Makefile new file +49 -0
49 lines not on this page · raw message
board/omap3/zoom2/config.mk new file +33 -0
@@ -0,0 +1,33 @@ +# +# (C) Copyright 2009 +# Texas Instruments, <www.ti.com> +# +# Zoom II uses OMAP3 (ARM-CortexA8) cpu +# see http://www.ti.com/ for more information on Texas Instruments +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +# Physical Address: +# 8000'0000 (bank0) +# A000/0000 (bank1) +# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000 +# (mem base + reserved) + +# For use with external or internal boots. +TEXT_BASE = 0x80e80000
board/omap3/zoom2/u-boot.lds new file +63 -0
63 lines not on this page · raw message
board/omap3/zoom2/zoom2.c new file +79 -0
79 lines not on this page · raw message
board/omap3/zoom2/zoom2.h new file +134 -0
134 lines not on this page · raw message
include/configs/omap3_zoom2.h new file +328 -0
328 lines not on this page · raw message
Signature · 1 line
1.6.0.5