Skip to contentSkip to conversation

lpfc 8.3.1 : Fix up kernel-doc function comments (Take 2) - Part 5 of 5

PATCH In review James Smart 1 participant 1 message Apr 6, 2009

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 5/7 lpfc 8.3.1 : Fix up kernel-doc function comments (Take 2) - Part 5 of 5

Fix up kernel-doc function comments (Take 2) - Part 5 of 5

This patch cleans up the kernel-doc formatting in:
lpfc_mbox.c
lpfc_mem.c
lpfc_scsi.c

---

 drivers/scsi/lpfc/lpfc_mbox.c |   63 +++++++++++++++++----------------
 drivers/scsi/lpfc/lpfc_mem.c  |   19 +++++-----
 drivers/scsi/lpfc/lpfc_scsi.c |   79 +++++++++++++++++++----------------------
 3 files changed, 77 insertions(+), 84 deletions(-)
drivers/scsi/lpfc/lpfc_mbox.c +32 -31
@@ -39,7 +39,7 @@
 #include "lpfc_compat.h"
 
 /**
- * lpfc_dump_mem: Prepare a mailbox command for retrieving HBA's VPD memory.
+ * lpfc_dump_mem - Prepare a mailbox command for retrieving HBA's VPD memory
  * @phba: pointer to lpfc hba data structure.
  * @pmb: pointer to the driver internal queue element for mailbox command.
  * @offset: offset for dumping VPD memory mailbox command.
@@ -77,9 +77,10 @@ lpfc_dump_mem(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb, uint16_t offset)
 }
 
 /**
- * lpfc_dump_mem: Prepare a mailbox command for retrieving wakeup params.
+ * lpfc_dump_wakeup_param - Prepare mailbox command for retrieving wakeup params
  * @phba: pointer to lpfc hba data structure.
  * @pmb: pointer to the driver internal queue element for mailbox command.
+ *
  * This function create a dump memory mailbox command to dump wake up
  * parameters.
  */
@@ -109,7 +110,7 @@ lpfc_dump_wakeup_param(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 }
 
 /**
- * lpfc_read_nv: Prepare a mailbox command for reading HBA's NVRAM param.
+ * lpfc_read_nv - Prepare a mailbox command for reading HBA's NVRAM param
  * @phba: pointer to lpfc hba data structure.
  * @pmb: pointer to the driver internal queue element for mailbox command.
  *
@@ -132,7 +133,7 @@ lpfc_read_nv(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
 }
 
 /**
- * lpfc_config_async: Prepare a mailbox command for enabling HBA async event.
+ * lpfc_config_async - Prepare a mailbox command for enabling HBA async event
  * @phba: pointer to lpfc hba data structure.
  * @pmb: pointer to the driver internal queue element for mailbox command.
  * @ring: ring number for the asynchronous event to be configured.
@@ -159,7 +160,7 @@ lpfc_config_async(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb,
 }
 
 /**
- * lpfc_heart_beat: Prepare a mailbox command for heart beat.
+ * lpfc_heart_beat - Prepare a mailbox command for heart beat
  * @phba: pointer to lpfc hba data structure.
  * @pmb: pointer to the driver internal queue element for mailbox command.
  *
@@ -184,7 +185,7 @@ lpfc_heart_beat(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
 }
 
 /**
- * lpfc_read_la: Prepare a mailbox command for reading HBA link attention.
+ * lpfc_read_la - Prepare a mailbox command for reading HBA link attention
  * @phba: pointer to lpfc hba data structure.
  * @pmb: pointer to the driver internal queue element for mailbox command.
  * @mp: DMA buffer memory for reading the link attention information into.
@@ -228,7 +229,7 @@ lpfc_read_la(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb, struct lpfc_dmabuf *mp)
 }
 
 /**
- * lpfc_clear_la: Prepare a mailbox command for clearing HBA link attention.
+ * lpfc_clear_la - Prepare a mailbox command for clearing HBA link attention
  * @phba: pointer to lpfc hba data structure.
  * @pmb: pointer to the driver internal queue element for mailbox command.
  *
@@ -257,7 +258,7 @@ lpfc_clear_la(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
 }
 
 /**
- * lpfc_config_link: Prepare a mailbox command for configuring link on a HBA.
+ * lpfc_config_link - Prepare a mailbox command for configuring link on a HBA
  * @phba: pointer to lpfc hba data structure.
  * @pmb: pointer to the driver internal queue element for mailbox command.
  *
@@ -305,7 +306,7 @@ lpfc_config_link(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
 }
 
 /**
- * lpfc_config_msi: Prepare a mailbox command for configuring msi-x.
+ * lpfc_config_msi - Prepare a mailbox command for configuring msi-x
  * @phba: pointer to lpfc hba data structure.
  * @pmb: pointer to the driver internal queue element for mailbox command.
  *
@@ -383,7 +384,7 @@ lpfc_config_msi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 }
 
 /**
- * lpfc_init_link: Prepare a mailbox command for initialize link on a HBA.
+ * lpfc_init_link - Prepare a mailbox command for initialize link on a HBA
  * @phba: pointer to lpfc hba data structure.
  * @pmb: pointer to the driver internal queue element for mailbox command.
  * @topology: the link topology for the link to be initialized to.
@@ -463,7 +464,7 @@ lpfc_init_link(struct lpfc_hba * phba,
 }
 
 /**
- * lpfc_read_sparam: Prepare a mailbox command for reading HBA parameters.
+ * lpfc_read_sparam - Prepare a mailbox command for reading HBA parameters
  * @phba: pointer to lpfc hba data structure.
  * @pmb: pointer to the driver internal queue element for mailbox command.
  * @vpi: virtual N_Port identifier.
@@ -523,7 +524,7 @@ lpfc_read_sparam(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb, int vpi)
 }
 
 /**
- * lpfc_unreg_did: Prepare a mailbox command for unregistering DID.
+ * lpfc_unreg_did - Prepare a mailbox command for unregistering DID
  * @phba: pointer to lpfc hba data structure.
  * @vpi: virtual N_Port identifier.
  * @did: remote port identifier.
@@ -555,7 +556,7 @@ lpfc_unreg_did(struct lpfc_hba * phba, uint16_t vpi, uint32_t did,
 }
 
 /**
- * lpfc_read_config: Prepare a mailbox command for reading HBA configuration.
+ * lpfc_read_config - Prepare a mailbox command for reading HBA configuration
  * @phba: pointer to lpfc hba data structure.
  * @pmb: pointer to the driver internal queue element for mailbox command.
  *
@@ -581,7 +582,7 @@ lpfc_read_config(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
 }
 
 /**
- * lpfc_read_lnk_stat: Prepare a mailbox command for reading HBA link stats.
+ * lpfc_read_lnk_stat - Prepare a mailbox command for reading HBA link stats
  * @phba: pointer to lpfc hba data structure.
  * @pmb: pointer to the driver internal queue element for mailbox command.
  *
@@ -606,7 +607,7 @@ lpfc_read_lnk_stat(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
 }
 
 /**
- * lpfc_reg_login: Prepare a mailbox command for registering remote login.
+ * lpfc_reg_login - Prepare a mailbox command for registering remote login
  * @phba: pointer to lpfc hba data structure.
  * @vpi: virtual N_Port identifier.
  * @did: remote port identifier.
@@ -677,7 +678,7 @@ lpfc_reg_login(struct lpfc_hba *phba, uint16_t vpi, uint32_t did,
 }
 
 /**
- * lpfc_unreg_login: Prepare a mailbox command for unregistering remote login.
+ * lpfc_unreg_login - Prepare a mailbox command for unregistering remote login
  * @phba: pointer to lpfc hba data structure.
  * @vpi: virtual N_Port identifier.
  * @rpi: remote port identifier
@@ -709,7 +710,7 @@ lpfc_unreg_login(struct lpfc_hba *phba, uint16_t vpi, uint32_t rpi,
 }
 
 /**
- * lpfc_reg_vpi: Prepare a mailbox command for registering vport identifier.
+ * lpfc_reg_vpi - Prepare a mailbox command for registering vport identifier
  * @phba: pointer to lpfc hba data structure.
  * @vpi: virtual N_Port identifier.
  * @sid: Fibre Channel S_ID (N_Port_ID assigned to a virtual N_Port).
@@ -741,7 +742,7 @@ lpfc_reg_vpi(struct lpfc_hba *phba, uint16_t vpi, uint32_t sid,
 }
 
 /**
- * lpfc_unreg_vpi: Prepare a mailbox command for unregistering vport id.
+ * lpfc_unreg_vpi - Prepare a mailbox command for unregistering vport id
  * @phba: pointer to lpfc hba data structure.
  * @vpi: virtual N_Port identifier.
  * @pmb: pointer to the driver internal queue element for mailbox command.
@@ -771,7 +772,7 @@ lpfc_unreg_vpi(struct lpfc_hba *phba, uint16_t vpi, LPFC_MBOXQ_t *pmb)
 }
 
 /**
- * lpfc_config_pcb_setup: Set up IOCB rings in the Port Control Block (PCB)
+ * lpfc_config_pcb_setup - Set up IOCB rings in the Port Control Block (PCB)
  * @phba: pointer to lpfc hba data structure.
  *
  * This routine sets up and initializes the IOCB rings in the Port Control
@@ -835,7 +836,7 @@ lpfc_config_pcb_setup(struct lpfc_hba * phba)
 }
 
 /**
- * lpfc_read_rev: Prepare a mailbox command for reading HBA revision.
+ * lpfc_read_rev - Prepare a mailbox command for reading HBA revision
  * @phba: pointer to lpfc hba data structure.
  * @pmb: pointer to the driver internal queue element for mailbox command.
  *
@@ -861,7 +862,7 @@ lpfc_read_rev(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
 }
 
 /**
- * lpfc_build_hbq_profile2: Set up the HBQ Selection Profile 2.
+ * lpfc_build_hbq_profile2 - Set up the HBQ Selection Profile 2
  * @hbqmb: pointer to the HBQ configuration data structure in mailbox command.
  * @hbq_desc: pointer to the HBQ selection profile descriptor.
  *
@@ -880,7 +881,7 @@ lpfc_build_hbq_profile2(struct config_hbq_var *hbqmb,
 }
 
 /**
- * lpfc_build_hbq_profile3: Set up the HBQ Selection Profile 3.
+ * lpfc_build_hbq_profile3 - Set up the HBQ Selection Profile 3
  * @hbqmb: pointer to the HBQ configuration data structure in mailbox command.
  * @hbq_desc: pointer to the HBQ selection profile descriptor.
  *
@@ -902,7 +903,7 @@ lpfc_build_hbq_profile3(struct config_hbq_var *hbqmb,
 }
 
 /**
- * lpfc_build_hbq_profile5: Set up the HBQ Selection Profile 5.
+ * lpfc_build_hbq_profile5 - Set up the HBQ Selection Profile 5
  * @hbqmb: pointer to the HBQ configuration data structure in mailbox command.
  * @hbq_desc: pointer to the HBQ selection profile descriptor.
  *
@@ -925,7 +926,7 @@ lpfc_build_hbq_profile5(struct config_hbq_var *hbqmb,
 }
 
 /**
- * lpfc_config_hbq: Prepare a mailbox command for configuring an HBQ.
+ * lpfc_config_hbq - Prepare a mailbox command for configuring an HBQ
  * @phba: pointer to lpfc hba data structure.
  * @id: HBQ identifier.
  * @hbq_desc: pointer to the HBA descriptor data structure.
@@ -999,7 +1000,7 @@ lpfc_config_hbq(struct lpfc_hba *phba, uint32_t id,
 }
 
 /**
- * lpfc_config_ring: Prepare a mailbox command for configuring an IOCB ring.
+ * lpfc_config_ring - Prepare a mailbox command for configuring an IOCB ring
  * @phba: pointer to lpfc hba data structure.
  * @ring:
  * @pmb: pointer to the driver internal queue element for mailbox command.
@@ -1057,7 +1058,7 @@ lpfc_config_ring(struct lpfc_hba * phba, int ring, LPFC_MBOXQ_t * pmb)
 }
 
 /**
- * lpfc_config_port: Prepare a mailbox command for configuring port.
+ * lpfc_config_port - Prepare a mailbox command for configuring port
  * @phba: pointer to lpfc hba data structure.
  * @pmb: pointer to the driver internal queue element for mailbox command.
  *
@@ -1227,7 +1228,7 @@ lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 }
 
 /**
- * lpfc_kill_board: Prepare a mailbox command for killing board.
+ * lpfc_kill_board - Prepare a mailbox command for killing board
  * @phba: pointer to lpfc hba data structure.
  * @pmb: pointer to the driver internal queue element for mailbox command.
  *
@@ -1253,7 +1254,7 @@ lpfc_kill_board(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
 }
 
 /**
- * lpfc_mbox_put: Put a mailbox cmd into the tail of driver's mailbox queue.
+ * lpfc_mbox_put - Put a mailbox cmd into the tail of driver's mailbox queue
  * @phba: pointer to lpfc hba data structure.
  * @mbq: pointer to the driver internal queue element for mailbox command.
  *
@@ -1277,7 +1278,7 @@ lpfc_mbox_put(struct lpfc_hba * phba, LPFC_MBOXQ_t * mbq)
 }
 
 /**
- * lpfc_mbox_get: Remove a mailbox cmd from the head of driver's mailbox queue.
+ * lpfc_mbox_get - Remove a mailbox cmd from the head of driver's mailbox queue
  * @phba: pointer to lpfc hba data structure.
  *
  * Driver maintains a internal mailbox command queue implemented as a linked
@@ -1304,7 +1305,7 @@ lpfc_mbox_get(struct lpfc_hba * phba)
 }
 
 /**
- * lpfc_mbox_cmpl_put: Put mailbox command into mailbox command complete list.
+ * lpfc_mbox_cmpl_put - Put mailbox command into mailbox command complete list
  * @phba: pointer to lpfc hba data structure.
  * @mbq: pointer to the driver internal queue element for mailbox command.
  *
@@ -1327,7 +1328,7 @@ lpfc_mbox_cmpl_put(struct lpfc_hba * phba, LPFC_MBOXQ_t * mbq)
 }
 
 /**
- * lpfc_mbox_tmo_val: Retrieve mailbox command timeout value.
+ * lpfc_mbox_tmo_val - Retrieve mailbox command timeout value
  * @phba: pointer to lpfc hba data structure.
  * @cmd: mailbox command code.
  *
drivers/scsi/lpfc/lpfc_mem.c +9 -10
@@ -41,7 +41,7 @@
 
 
 /**
- * lpfc_mem_alloc: create and allocate all PCI and memory pools
+ * lpfc_mem_alloc - create and allocate all PCI and memory pools
  * @phba: HBA to allocate pools for
  *
  * Description: Creates and allocates PCI pools lpfc_scsi_dma_buf_pool,
@@ -136,12 +136,12 @@ lpfc_mem_alloc(struct lpfc_hba * phba)
 }
 
 /**
- * lpfc_mem_free: Frees all PCI and memory allocated by lpfc_mem_alloc
+ * lpfc_mem_free - Frees all PCI and memory allocated by lpfc_mem_alloc
  * @phba: HBA to free memory for
  *
  * Description: Frees PCI pools lpfc_scsi_dma_buf_pool, lpfc_mbuf_pool,
  * lpfc_hbq_pool.  Frees kmalloc-backed mempools for LPFC_MBOXQ_t and
- * lpfc_nodelist.  Also frees the VPI bitmask.
+ * lpfc_nodelist.  Also frees the VPI bitmask
  *
  * Returns: None
  **/
@@ -212,7 +212,7 @@ lpfc_mem_free(struct lpfc_hba * phba)
 }
 
 /**
- * lpfc_mbuf_alloc: Allocate an mbuf from the lpfc_mbuf_pool PCI pool
+ * lpfc_mbuf_alloc - Allocate an mbuf from the lpfc_mbuf_pool PCI pool
  * @phba: HBA which owns the pool to allocate from
  * @mem_flags: indicates if this is a priority (MEM_PRI) allocation
  * @handle: used to return the DMA-mapped address of the mbuf
@@ -249,7 +249,7 @@ lpfc_mbuf_alloc(struct lpfc_hba *phba, int mem_flags, dma_addr_t *handle)
 }
 
 /**
- * __lpfc_mem_free: Free an mbuf from the lpfc_mbuf_pool PCI pool (locked)
+ * __lpfc_mbuf_free - Free an mbuf from the lpfc_mbuf_pool PCI pool (locked)
  * @phba: HBA which owns the pool to return to
  * @virt: mbuf to free
  * @dma: the DMA-mapped address of the lpfc_mbuf_pool to be freed
@@ -278,7 +278,7 @@ __lpfc_mbuf_free(struct lpfc_hba * phba, void *virt, dma_addr_t dma)
 }
 
 /**
- * lpfc_mem_free: Free an mbuf from the lpfc_mbuf_pool PCI pool (unlocked)
+ * lpfc_mbuf_free - Free an mbuf from the lpfc_mbuf_pool PCI pool (unlocked)
  * @phba: HBA which owns the pool to return to
  * @virt: mbuf to free
  * @dma: the DMA-mapped address of the lpfc_mbuf_pool to be freed
@@ -291,7 +291,6 @@ __lpfc_mbuf_free(struct lpfc_hba * phba, void *virt, dma_addr_t dma)
  * Returns: None
  **/
 void
-
 lpfc_mbuf_free(struct lpfc_hba * phba, void *virt, dma_addr_t dma)
 {
 	unsigned long iflags;
@@ -303,7 +302,7 @@ lpfc_mbuf_free(struct lpfc_hba * phba, void *virt, dma_addr_t dma)
 }
 
 /**
- * lpfc_els_hbq_alloc: Allocate an HBQ buffer
+ * lpfc_els_hbq_alloc - Allocate an HBQ buffer
  * @phba: HBA to allocate HBQ buffer for
  *
  * Description: Allocates a DMA-mapped HBQ buffer from the lpfc_hbq_pool PCI
@@ -335,7 +334,7 @@ lpfc_els_hbq_alloc(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_mem_hbq_free: Frees an HBQ buffer allocated with lpfc_els_hbq_alloc
+ * lpfc_mem_hbq_free - Frees an HBQ buffer allocated with lpfc_els_hbq_alloc
  * @phba: HBA buffer was allocated for
  * @hbqbp: HBQ container returned by lpfc_els_hbq_alloc
  *
@@ -355,7 +354,7 @@ lpfc_els_hbq_free(struct lpfc_hba *phba, struct hbq_dmabuf *hbqbp)
 }
 
 /**
- * lpfc_in_buf_free: Free a DMA buffer
+ * lpfc_in_buf_free - Free a DMA buffer
  * @phba: HBA buffer is associated with
  * @mp: Buffer to free
  *
drivers/scsi/lpfc/lpfc_scsi.c +36 -43

283 lines not on this page · raw message