Skip to contentSkip to conversation

lpfc 8.3.1 : Main body of fixes/changes

PATCH In review James Smart 1 participant 1 message Apr 6, 2009

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 6/7 lpfc 8.3.1 : Main body of fixes/changes

8.3.1 Fixes/Changes :

- Fix incorrect byte-swapping on word 4 of IOCB (data length) which caused LUNs to not be discovered on big-endian (e.g. PPC)

- Remove a bad cast of MBslimaddr which loses the __iomem (sparse)

- Make lpfc_debugfs_mask_disc_trc static (sparse)

- Correct misspelled word BlockGuard in lpfc_logmsg.h comment

- Replaced repeated code segment for canceling IOCBs from a list with a function call, lpfc_sli_cancel_iocbs().

- Increased HBQ buffers to support 40KB SSC sequences.

- Added sysfs interface to update speed and topology parameter without link bounce.

- Fixed bug with sysfs fc_host WWNs not being updated after changing the WWNs.

- Check if the active mailbox is NULL in the beginning of the mailbox timeout handler - fixes panic in the mailbox timeout handler while running IO stress test

- Fixed system panic in lpfc_pci_remove_one() due to ndlp indirect reference to phba through vport

- Removed de-reference of scsi device after call to scsi_done() to fix panic in scsi completion path while accessing scsi device after scsi_done is called.

- Fixed "Nodelist not empty" message when unloading the driver after target reboot test

- Added LP2105 HBA model description

- Added code to print all 16 words of unrecognized ASYNC events

- Fixed memory leak in vport create + delete loop

- Added support for handling dual error bit from HBA

- Fixed a driver NULL pointer dereference in lpfc_sli_process_sol_iocb

- Fixed a discovery bug with FC switch reboot in lpfc_setup_disc_node

- Take NULL termintator into account when calculating available buffer space

---

 lpfc.h           |    2 
 lpfc_attr.c      |   67 +++++++++++++---
 lpfc_crtn.h      |    2 
 lpfc_debugfs.c   |    5 -
 lpfc_disc.h      |    1 
 lpfc_els.c       |   75 ++++--------------
 lpfc_hbadisc.c   |   80 ++++++++-----------
 lpfc_init.c      |  104 +++++++++++++++++++++----
 lpfc_logmsg.h    |    2 
 lpfc_nportdisc.c |   18 ----
 lpfc_scsi.c      |   47 ++++++-----
 lpfc_sli.c       |  221 ++++++++++++++++++++++++++++++++++++-------------------
 12 files changed, 378 insertions(+), 246 deletions(-)
drivers/scsi/lpfc/lpfc_attr.c +55 -12
diff -upNr a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
@@ -2216,18 +2216,41 @@ LPFC_VPORT_ATTR_R(scan_down, 1, 0, 1,
  * non-zero return value from lpfc_issue_lip()
  * -EINVAL val out of range
  **/
-static int
-lpfc_topology_set(struct lpfc_hba *phba, int val)
+static ssize_t
+lpfc_topology_store(struct device *dev, struct device_attribute *attr,
+			const char *buf, size_t count)
 {
+	struct Scsi_Host  *shost = class_to_shost(dev);
+	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
+	struct lpfc_hba   *phba = vport->phba;
+	int val = 0;
+	int nolip = 0;
+	const char *val_buf = buf;
 	int err;
 	uint32_t prev_val;
+
+	if (!strncmp(buf, "nolip ", strlen("nolip "))) {
+		nolip = 1;
+		val_buf = &buf[strlen("nolip ")];
+	}
+
+	if (!isdigit(val_buf[0]))
+		return -EINVAL;
+	if (sscanf(val_buf, "%i", &val) != 1)
+		return -EINVAL;
+
 	if (val >= 0 && val <= 6) {
 		prev_val = phba->cfg_topology;
 		phba->cfg_topology = val;
+		if (nolip)
+			return strlen(buf);
+
 		err = lpfc_issue_lip(lpfc_shost_from_vport(phba->pport));
-		if (err)
+		if (err) {
 			phba->cfg_topology = prev_val;
-		return err;
+			return -EINVAL;
+		} else
+			return strlen(buf);
 	}
 	lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
 		"%d:0467 lpfc_topology attribute cannot be set to %d, "
@@ -2240,7 +2263,6 @@ module_param(lpfc_topology, int, 0);
 MODULE_PARM_DESC(lpfc_topology, "Select Fibre Channel topology");
 lpfc_param_show(topology)
 lpfc_param_init(topology, 0, 0, 6)
-lpfc_param_store(topology)
 static DEVICE_ATTR(lpfc_topology, S_IRUGO | S_IWUSR,
 		lpfc_topology_show, lpfc_topology_store);
 
@@ -2281,7 +2303,7 @@ lpfc_stat_data_ctrl_store(struct device 
 	unsigned long base, step, bucket_type;
 
 	if (!strncmp(buf, "setbucket", strlen("setbucket"))) {
-		if (strlen(buf) > LPFC_MAX_DATA_CTRL_LEN)
+		if (strlen(buf) > (LPFC_MAX_DATA_CTRL_LEN - 1))
 			return -EINVAL;
 
 		strcpy(bucket_data, buf);
@@ -2598,12 +2620,29 @@ static struct bin_attribute sysfs_drvr_s
  * non-zero return value from lpfc_issue_lip()
  * -EINVAL val out of range
  **/
-static int
-lpfc_link_speed_set(struct lpfc_hba *phba, int val)
+static ssize_t
+lpfc_link_speed_store(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t count)
 {
+	struct Scsi_Host  *shost = class_to_shost(dev);
+	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
+	struct lpfc_hba   *phba = vport->phba;
+	int val = 0;
+	int nolip = 0;
+	const char *val_buf = buf;
 	int err;
 	uint32_t prev_val;
 
+	if (!strncmp(buf, "nolip ", strlen("nolip "))) {
+		nolip = 1;
+		val_buf = &buf[strlen("nolip ")];
+	}
+
+	if (!isdigit(val_buf[0]))
+		return -EINVAL;
+	if (sscanf(val_buf, "%i", &val) != 1)
+		return -EINVAL;
+
 	if (((val == LINK_SPEED_1G) && !(phba->lmt & LMT_1Gb)) ||
 		((val == LINK_SPEED_2G) && !(phba->lmt & LMT_2Gb)) ||
 		((val == LINK_SPEED_4G) && !(phba->lmt & LMT_4Gb)) ||
@@ -2611,14 +2650,19 @@ lpfc_link_speed_set(struct lpfc_hba *phb
 		((val == LINK_SPEED_10G) && !(phba->lmt & LMT_10Gb)))
 		return -EINVAL;
 
-	if ((val >= 0 && val <= LPFC_MAX_LINK_SPEED)
+	if ((val >= 0 && val <= 8)
 		&& (LPFC_LINK_SPEED_BITMAP & (1 << val))) {
 		prev_val = phba->cfg_link_speed;
 		phba->cfg_link_speed = val;
+		if (nolip)
+			return strlen(buf);
+
 		err = lpfc_issue_lip(lpfc_shost_from_vport(phba->pport));
-		if (err)
+		if (err) {
 			phba->cfg_link_speed = prev_val;
-		return err;
+			return -EINVAL;
+		} else
+			return strlen(buf);
 	}
 
 	lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
@@ -2665,7 +2709,6 @@ lpfc_link_speed_init(struct lpfc_hba *ph
 	return -EINVAL;
 }
 
-lpfc_param_store(link_speed)
 static DEVICE_ATTR(lpfc_link_speed, S_IRUGO | S_IWUSR,
 		lpfc_link_speed_show, lpfc_link_speed_store);
 
drivers/scsi/lpfc/lpfc_crtn.h +2 -0
diff -upNr a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h
@@ -184,6 +184,8 @@ void lpfc_sli_poll_fcp_ring(struct lpfc_
 struct lpfc_iocbq * lpfc_sli_get_iocbq(struct lpfc_hba *);
 void lpfc_sli_release_iocbq(struct lpfc_hba *, struct lpfc_iocbq *);
 uint16_t lpfc_sli_next_iotag(struct lpfc_hba *, struct lpfc_iocbq *);
+void lpfc_sli_cancel_iocbs(struct lpfc_hba *, struct list_head *, uint32_t,
+			   uint32_t);
 
 void lpfc_reset_barrier(struct lpfc_hba * phba);
 int lpfc_sli_brdready(struct lpfc_hba *, uint32_t);
drivers/scsi/lpfc/lpfc_debugfs.c +2 -3
diff -upNr a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c
@@ -95,7 +95,7 @@ module_param(lpfc_debugfs_max_slow_ring_
 MODULE_PARM_DESC(lpfc_debugfs_max_slow_ring_trc,
 	"Set debugfs slow ring trace depth");
 
-int lpfc_debugfs_mask_disc_trc;
+static int lpfc_debugfs_mask_disc_trc;
 module_param(lpfc_debugfs_mask_disc_trc, int, 0);
 MODULE_PARM_DESC(lpfc_debugfs_mask_disc_trc,
 	"Set debugfs discovery trace mask");
@@ -399,8 +399,7 @@ lpfc_debugfs_dumpHBASlim_data(struct lpf
 
 	len +=  snprintf(buf+len, size-len, "HBA SLIM\n");
 	lpfc_memcpy_from_slim(buffer,
-		((uint8_t *)phba->MBslimaddr) + lpfc_debugfs_last_hba_slim_off,
-		1024);
+		phba->MBslimaddr + lpfc_debugfs_last_hba_slim_off, 1024);
 
 	ptr = (uint32_t *)&buffer[0];
 	off = lpfc_debugfs_last_hba_slim_off;
drivers/scsi/lpfc/lpfc_disc.h +1 -0
diff -upNr a/drivers/scsi/lpfc/lpfc_disc.h b/drivers/scsi/lpfc/lpfc_disc.h
@@ -99,6 +99,7 @@ struct lpfc_nodelist {
 #define NLP_USG_FREE_ACK_BIT	0x8	/* Indicate ndlp memory free invoked */
 
 	struct timer_list   nlp_delayfunc;	/* Used for delayed ELS cmds */
+	struct lpfc_hba *phba;
 	struct fc_rport *rport;			/* Corresponding FC transport
 						   port structure */
 	struct lpfc_vport *vport;
drivers/scsi/lpfc/lpfc_els.c +18 -57

122 lines not on this page · raw message

drivers/scsi/lpfc/lpfc.h +1 -1
diff -upNr a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
@@ -443,6 +443,7 @@ struct lpfc_hba {
 	uint32_t hba_flag;	/* hba generic flags */
 #define HBA_ERATT_HANDLED	0x1 /* This flag is set when eratt handled */
 
+#define DEFER_ERATT		0x4 /* Deferred error attention in progress */
 	struct lpfc_dmabuf slim2p;
 
 	MAILBOX_t *mbox;
@@ -723,4 +724,3 @@ lpfc_sli_read_hs(struct lpfc_hba *phba)
 
 	return;
 }
-
drivers/scsi/lpfc/lpfc_hbadisc.c +35 -45

165 lines not on this page · raw message

drivers/scsi/lpfc/lpfc_init.c +85 -19

159 lines not on this page · raw message

drivers/scsi/lpfc/lpfc_logmsg.h +1 -1
diff -upNr a/drivers/scsi/lpfc/lpfc_logmsg.h b/drivers/scsi/lpfc/lpfc_logmsg.h
@@ -27,7 +27,7 @@
 #define LOG_FCP                       0x40	/* FCP traffic history */
 #define LOG_NODE                      0x80	/* Node table events */
 #define LOG_TEMP                      0x100	/* Temperature sensor events */
-#define LOG_BG			      0x200	/* BlockBuard events */
+#define LOG_BG			      0x200	/* BlockGuard events */
 #define LOG_MISC                      0x400	/* Miscellaneous events */
 #define LOG_SLI                       0x800	/* SLI events */
 #define LOG_FCP_ERROR                 0x1000	/* log errors, not underruns */
drivers/scsi/lpfc/lpfc_nportdisc.c +4 -14
diff -upNr a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -192,7 +192,6 @@ lpfc_els_abort(struct lpfc_hba *phba, st
 	struct lpfc_sli  *psli = &phba->sli;
 	struct lpfc_sli_ring *pring = &psli->ring[LPFC_ELS_RING];
 	struct lpfc_iocbq *iocb, *next_iocb;
-	IOCB_t *cmd;
 
 	/* Abort outstanding I/O on NPort <nlp_DID> */
 	lpfc_printf_vlog(ndlp->vport, KERN_INFO, LOG_DISCOVERY,
@@ -223,19 +222,10 @@ lpfc_els_abort(struct lpfc_hba *phba, st
 	}
 	spin_unlock_irq(&phba->hbalock);
 
-	while (!list_empty(&completions)) {
-		iocb = list_get_first(&completions, struct lpfc_iocbq, list);
-		cmd = &iocb->iocb;
-		list_del_init(&iocb->list);
-
-		if (!iocb->iocb_cmpl)
-			lpfc_sli_release_iocbq(phba, iocb);
-		else {
-			cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
-			cmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
-			(iocb->iocb_cmpl) (phba, iocb, iocb);
-		}
-	}
+	/* Cancel all the IOCBs from the completions list */
+	lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+			      IOERR_SLI_ABORTED);
+
 	lpfc_cancel_retry_delay_tmo(phba->pport, ndlp);
 	return 0;
 }
drivers/scsi/lpfc/lpfc_scsi.c +26 -21

151 lines not on this page · raw message

drivers/scsi/lpfc/lpfc_sli.c +148 -73

360 lines not on this page · raw message