OMAP3: lessen amount of noisy messages
PATCH 1/1 OMAP3: lessen amount of noisy messages
From: Artem Bityutskiy <[email protected]>
Date: Thu, 9 Apr 2009 17:15:47 +0300
Subject: [PATCH] OMAP3: lessen amount of noisy messages
On our system we see the following messages:
Disabling unused clock "gpt2_ick"
Disabling unused clock "gpt3_ick"
Disabling unused clock "gpt4_ick"
Disabling unused clock "gpt5_ick"
Disabling unused clock "gpt6_ick"
Disabling unused clock "gpt7_ick"
Disabling unused clock "gpt8_ick"
Disabling unused clock "gpt9_ick"
Disabling unused clock "gpio2_dbck"
Disabling unused clock "gpio3_dbck"
Disabling unused clock "gpio4_dbck"
Disabling unused clock "gpio5_dbck"
Disabling unused clock "gpio6_dbck"
Disabling unused clock "gpt9_fck"
Disabling unused clock "gpt8_fck"
Disabling unused clock "gpt7_fck"
Disabling unused clock "gpt6_fck"
Disabling unused clock "gpt5_fck"
Disabling unused clock "gpt4_fck"
Disabling unused clock "gpt3_fck"
Disabling unused clock "gpt2_fck"
Disabling unused clock "wdt2_ick"
Disabling unused clock "wdt2_fck"
Disabling unused clock "gpio1_dbck"
Disabling unused clock "rng_ick"
Disabling unused clock "ssi_ick"
Disabling unused clock "gpt10_ick"
Disabling unused clock "gpt11_ick"
Disabling unused clock "uart1_ick"
Disabling unused clock "uart2_ick"
Disabling unused clock "usbtll_ick"
Disabling unused clock "ssi_ssr_fck"
Disabling unused clock "uart1_fck"
Disabling unused clock "uart2_fck"
Disabling unused clock "usbtll_fck"
Disabling unused clock "ts_fck"
Disabling unused clock "cpefuse_fck"
Disabling unused clock "gpt11_fck"
Disabling unused clock "gpt10_fck"
Disabling unused clock "dpll5_ck"
Disabling unused clock "dpll4_m6x2_ck"
Disabling unused clock "dpll4_m5x2_ck"
Disabling unused clock "dpll3_m3x2_ck"
Disabling unused clock "sys_clkout1"
The messages have KERN_INFO level and if you have serial console, they normally go there. I do not think it is good idea to print that much stuff there. Moreover, messages are not properly prefixed and for mortals it is not immeadietly clear where they come from.
Let's give them debugging level instead.
--- arch/arm/mach-omap2/clock.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
arch/arm/mach-omap2/clock.c +1 -1
@@ -1035,7 +1035,7 @@ void omap2_clk_disable_unused(struct clk *clk)if ((regval32 & (1 << clk->enable_bit)) == v)return ; -printk (KERN_INFO "Disabling unused clock \"%s\"\n" , clk->name); +pr_debug ("Disabling unused clock \"%s\"\n" , clk->name);if (cpu_is_omap34xx ()) {omap2_clk_enable (clk);omap2_clk_disable (clk);
Signature · 10 lines
1.6.0.6 -- Best regards, Artem Bityutskiy (Битюцкий Артём) -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 57 lines · Artem Bityutskiy
From: Artem Bityutskiy <[email protected]>
Date: Thu, 9 Apr 2009 17:15:47 +0300
Subject: [PATCH] OMAP3: lessen amount of noisy messagesOn our system we see the following messages:
Disabling unused clock "
gpt2_ick"
Disabling unused clock "gpt3_ick"
Disabling unused clock "gpt4_ick"
Disabling unused clock "gpt5_ick"
Disabling unused clock "gpt6_ick"
Disabling unused clock "gpt7_ick"
Disabling unused clock "gpt8_ick"
Disabling unused clock "gpt9_ick"
Disabling unused clock "gpio2_dbck"
Disabling unused clock "gpio3_dbck"
Disabling unused clock "gpio4_dbck"
Disabling unused clock "gpio5_dbck"
Disabling unused clock "gpio6_dbck"
Disabling unused clock "gpt9_fck"
Disabling unused clock "gpt8_fck"
Disabling unused clock "gpt7_fck"
Disabling unused clock "gpt6_fck"
Disabling unused clock "gpt5_fck"
Disabling unused clock "gpt4_fck"
Disabling unused clock "gpt3_fck"
Disabling unused clock "gpt2_fck"
Disabling unused clock "wdt2_ick"
Disabling unused clock "wdt2_fck"
Disabling unused clock "gpio1_dbck"
Disabling unused clock "rng_ick"
Disabling unused clock "ssi_ick"
Disabling unused clock "gpt10_ick"
Disabling unused clock "gpt11_ick"
Disabling unused clock "uart1_ick"
Disabling unused clock "uart2_ick"
Disabling unused clock "usbtll_ick"
Disabling unused clock "ssi_ssr_fck"
Disabling unused clock "uart1_fck"
Disabling unused clock "uart2_fck"
Disabling unused clock "usbtll_fck"
Disabling unused clock "ts_fck"
Disabling unused clock "cpefuse_fck"
Disabling unused clock "gpt11_fck"
Disabling unused clock "gpt10_fck"
Disabling unused clock "dpll5_ck"
Disabling unused clock "dpll4_m6x2_ck"
Disabling unused clock "dpll4_m5x2_ck"
Disabling unused clock "dpll3_m3x2_ck"
Disabling unused clock "sys_clkout1"The messages have
KERN_INFOlevel and if you have serial console, they normally go there. I do not think it is good idea to print that much stuff there. Moreover, messages are not properly prefixed and for mortals it is not immeadietly clear where they come from.
Quoted 3 lines
Let's give them debugging level instead.
Signed-off-by Artem Bityutskiy <[email protected]>
Hi, what is the destiny of this patch?
Signature · 6 lines
Best Regards, Artem Bityutskiy (Артём Битюцкий) -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Artem,
Personally, I like your patch :)
Regards,
Kyuwon
Quoted 65 lines · Artem Bityutskiy
Quoted 58 lines · Artem Bityutskiy
From: Artem Bityutskiy <[email protected]>
Date: Thu, 9 Apr 2009 17:15:47 +0300
Subject: [PATCH] OMAP3: lessen amount of noisy messagesOn our system we see the following messages:
Disabling unused clock "
gpt2_ick"
Disabling unused clock "gpt3_ick"
Disabling unused clock "gpt4_ick"
Disabling unused clock "gpt5_ick"
Disabling unused clock "gpt6_ick"
Disabling unused clock "gpt7_ick"
Disabling unused clock "gpt8_ick"
Disabling unused clock "gpt9_ick"
Disabling unused clock "gpio2_dbck"
Disabling unused clock "gpio3_dbck"
Disabling unused clock "gpio4_dbck"
Disabling unused clock "gpio5_dbck"
Disabling unused clock "gpio6_dbck"
Disabling unused clock "gpt9_fck"
Disabling unused clock "gpt8_fck"
Disabling unused clock "gpt7_fck"
Disabling unused clock "gpt6_fck"
Disabling unused clock "gpt5_fck"
Disabling unused clock "gpt4_fck"
Disabling unused clock "gpt3_fck"
Disabling unused clock "gpt2_fck"
Disabling unused clock "wdt2_ick"
Disabling unused clock "wdt2_fck"
Disabling unused clock "gpio1_dbck"
Disabling unused clock "rng_ick"
Disabling unused clock "ssi_ick"
Disabling unused clock "gpt10_ick"
Disabling unused clock "gpt11_ick"
Disabling unused clock "uart1_ick"
Disabling unused clock "uart2_ick"
Disabling unused clock "usbtll_ick"
Disabling unused clock "ssi_ssr_fck"
Disabling unused clock "uart1_fck"
Disabling unused clock "uart2_fck"
Disabling unused clock "usbtll_fck"
Disabling unused clock "ts_fck"
Disabling unused clock "cpefuse_fck"
Disabling unused clock "gpt11_fck"
Disabling unused clock "gpt10_fck"
Disabling unused clock "dpll5_ck"
Disabling unused clock "dpll4_m6x2_ck"
Disabling unused clock "dpll4_m5x2_ck"
Disabling unused clock "dpll3_m3x2_ck"
Disabling unused clock "sys_clkout1"The messages have
KERN_INFOlevel and if you have serial console, they normally go there. I do not think it is good idea to print that much stuff there. Moreover, messages are not properly prefixed and for mortals it is not immeadietly clear where they come from.Quoted 3 lines
Let's give them debugging level instead.
Signed-off-by Artem Bityutskiy <[email protected]>Hi, what is the destiny of this patch?
Quoted 8 lines
--
Best Regards,
Artem Bityutskiy (Артём Битюцкий)
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Paul Walmsley
maintainerQuoted 58 lines · Artem Bityutskiy
Quoted 57 lines · Artem Bityutskiy
From: Artem Bityutskiy <[email protected]>
Date: Thu, 9 Apr 2009 17:15:47 +0300
Subject: [PATCH] OMAP3: lessen amount of noisy messagesOn our system we see the following messages:
Disabling unused clock "
gpt2_ick"
Disabling unused clock "gpt3_ick"
Disabling unused clock "gpt4_ick"
Disabling unused clock "gpt5_ick"
Disabling unused clock "gpt6_ick"
Disabling unused clock "gpt7_ick"
Disabling unused clock "gpt8_ick"
Disabling unused clock "gpt9_ick"
Disabling unused clock "gpio2_dbck"
Disabling unused clock "gpio3_dbck"
Disabling unused clock "gpio4_dbck"
Disabling unused clock "gpio5_dbck"
Disabling unused clock "gpio6_dbck"
Disabling unused clock "gpt9_fck"
Disabling unused clock "gpt8_fck"
Disabling unused clock "gpt7_fck"
Disabling unused clock "gpt6_fck"
Disabling unused clock "gpt5_fck"
Disabling unused clock "gpt4_fck"
Disabling unused clock "gpt3_fck"
Disabling unused clock "gpt2_fck"
Disabling unused clock "wdt2_ick"
Disabling unused clock "wdt2_fck"
Disabling unused clock "gpio1_dbck"
Disabling unused clock "rng_ick"
Disabling unused clock "ssi_ick"
Disabling unused clock "gpt10_ick"
Disabling unused clock "gpt11_ick"
Disabling unused clock "uart1_ick"
Disabling unused clock "uart2_ick"
Disabling unused clock "usbtll_ick"
Disabling unused clock "ssi_ssr_fck"
Disabling unused clock "uart1_fck"
Disabling unused clock "uart2_fck"
Disabling unused clock "usbtll_fck"
Disabling unused clock "ts_fck"
Disabling unused clock "cpefuse_fck"
Disabling unused clock "gpt11_fck"
Disabling unused clock "gpt10_fck"
Disabling unused clock "dpll5_ck"
Disabling unused clock "dpll4_m6x2_ck"
Disabling unused clock "dpll4_m5x2_ck"
Disabling unused clock "dpll3_m3x2_ck"
Disabling unused clock "sys_clkout1"The messages have
KERN_INFOlevel and if you have serial console, they normally go there. I do not think it is good idea to print that much stuff there. Moreover, messages are not properly prefixed and for mortals it is not immeadietly clear where they come from.
Quoted 5 lines
Quoted 3 lines
Let's give them debugging level instead.
Signed-off-by Artem Bityutskiy <[email protected]>Hi, what is the destiny of this patch?
Hello Artem,
stil thinking about it. These messages have made it easy to catch bugs with the PM code in the past (e.g., sad2d). Making them debug-level will require booting a kernel with clock debugging specifically compiled in. So I wonder if there might be a better way to deal with these...
- Paul
Hi,
Quoted 5 lines · Paul Walmsley
stil thinking about it. These messages have made it easy to catch bugs with the PM code in the past (e.g., sad2d). Making them debug-level will require booting a kernel with clock debugging specifically compiled in. So I wonder if there might be a better way to deal with these...
Yeah, I see your concern. I'm your user, and from my perspective this is an excessive output to slow serial line.
If you do not want re-compilation, I may send a different patch like this:
- printk(KERN_INFO "Disabling unused clock \"%s\"\n", clk->name);
+ printk(KERN_DEBUG "Disabling unused clock \"%s\"\n", clk->name);
in which case you would not loose the messages, but the messages would not go to the serial line.
And then you would be able to get them from:
a) dmesg
b) syslog
c) console, just like currently, if you add "ignore_loglevel" kernel boot option (Documentation/kernel-parameters.txt)
Would this be better? Here is the patch, just in case. --
From: Artem Bityutskiy <[email protected]>
Subject: [PATCH] OMAP3: lessen amount of noisy messages
On our system we see the following messages:
Disabling unused clock "gpt2_ick"
Disabling unused clock "gpt3_ick"
Disabling unused clock "gpt4_ick"
Disabling unused clock "gpt5_ick"
Disabling unused clock "gpt6_ick"
Disabling unused clock "gpt7_ick"
Disabling unused clock "gpt8_ick"
Disabling unused clock "gpt9_ick"
Disabling unused clock "gpio2_dbck"
Disabling unused clock "gpio3_dbck"
Disabling unused clock "gpio4_dbck"
Disabling unused clock "gpio5_dbck"
Disabling unused clock "gpio6_dbck"
Disabling unused clock "gpt9_fck"
Disabling unused clock "gpt8_fck"
Disabling unused clock "gpt7_fck"
Disabling unused clock "gpt6_fck"
Disabling unused clock "gpt5_fck"
Disabling unused clock "gpt4_fck"
Disabling unused clock "gpt3_fck"
Disabling unused clock "gpt2_fck"
Disabling unused clock "wdt2_ick"
Disabling unused clock "wdt2_fck"
Disabling unused clock "gpio1_dbck"
Disabling unused clock "rng_ick"
Disabling unused clock "ssi_ick"
Disabling unused clock "gpt10_ick"
Disabling unused clock "gpt11_ick"
Disabling unused clock "uart1_ick"
Disabling unused clock "uart2_ick"
Disabling unused clock "usbtll_ick"
Disabling unused clock "ssi_ssr_fck"
Disabling unused clock "uart1_fck"
Disabling unused clock "uart2_fck"
Disabling unused clock "usbtll_fck"
Disabling unused clock "ts_fck"
Disabling unused clock "cpefuse_fck"
Disabling unused clock "gpt11_fck"
Disabling unused clock "gpt10_fck"
Disabling unused clock "dpll5_ck"
Disabling unused clock "dpll4_m6x2_ck"
Disabling unused clock "dpll4_m5x2_ck"
Disabling unused clock "dpll3_m3x2_ck"
Disabling unused clock "sys_clkout1"
The messages have KERN_INFO level and if you have serial console, they normally go there. I do not think it is good idea to print that much stuff there. Moreover, messages are not properly prefixed and for mortals it is not immeadietly clear where they come from.
Let's give them debugging level instead.
--- arch/arm/mach-omap2/clock.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
arch/arm/mach-omap2/clock.c +1 -1
@@ -1035,7 +1035,7 @@ void omap2_clk_disable_unused(struct clk *clk)if ((regval32 & (1 << clk->enable_bit)) == v)return ; -printk (KERN_INFO "Disabling unused clock \"%s\"\n" , clk->name); +printk (KERN_DEBUG "Disabling unused clock \"%s\"\n" , clk->name);if (cpu_is_omap34xx ()) {omap2_clk_enable (clk);omap2_clk_disable (clk);
Signature · 10 lines
1.6.0.6 -- Best regards, Artem Bityutskiy (Битюцкий Артём) -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 63 lines · Artem Bityutskiy
Disabling unused clock "
gpt2_ick" Disabling unused clock "gpt3_ick" Disabling unused clock "gpt4_ick" Disabling unused clock "gpt5_ick" Disabling unused clock "gpt6_ick" Disabling unused clock "gpt7_ick" Disabling unused clock "gpt8_ick" Disabling unused clock "gpt9_ick" Disabling unused clock "gpio2_dbck" Disabling unused clock "gpio3_dbck" Disabling unused clock "gpio4_dbck" Disabling unused clock "gpio5_dbck" Disabling unused clock "gpio6_dbck" Disabling unused clock "gpt9_fck" Disabling unused clock "gpt8_fck" Disabling unused clock "gpt7_fck" Disabling unused clock "gpt6_fck" Disabling unused clock "gpt5_fck" Disabling unused clock "gpt4_fck" Disabling unused clock "gpt3_fck" Disabling unused clock "gpt2_fck" Disabling unused clock "wdt2_ick" Disabling unused clock "wdt2_fck" Disabling unused clock "gpio1_dbck" Disabling unused clock "rng_ick" Disabling unused clock "ssi_ick" Disabling unused clock "gpt10_ick" Disabling unused clock "gpt11_ick" Disabling unused clock "uart1_ick" Disabling unused clock "uart2_ick" Disabling unused clock "usbtll_ick" Disabling unused clock "ssi_ssr_fck" Disabling unused clock "uart1_fck" Disabling unused clock "uart2_fck" Disabling unused clock "usbtll_fck" Disabling unused clock "ts_fck" Disabling unused clock "cpefuse_fck" Disabling unused clock "gpt11_fck" Disabling unused clock "gpt10_fck" Disabling unused clock "dpll5_ck" Disabling unused clock "dpll4_m6x2_ck" Disabling unused clock "dpll4_m5x2_ck" Disabling unused clock "dpll3_m3x2_ck" Disabling unused clock "sys_clkout1"The messages have
KERN_INFOlevel and if you have serial console, they normally go there. I do not think it is good idea to print that much stuff there. Moreover, messages are not properly prefixed and for mortals it is not immeadietly clear where they come from.Let's give them debugging level instead.
Signed-off-by Artem Bityutskiy <[email protected]>--- arch/arm/mach-omap2/clock.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)arch/arm/mach-omap2/clock.c +0
-0
arch/arm/mach-omap2/clock.c void omap2_clk_disable_unused(struct clk *clk) · line 1041
Quoted 8 lines
arch/arm/mach-omap2/clock.c +1
-1@@ -1035,7 +1035,7 @@ void omap2_clk_disable_unused(struct clk *clk)if ((regval32 & (1 << clk->enable_bit)) == v)return ; -printk (KERN_INFO "Disabling unused clock \"%s\"\n" , clk->name); +printk (KERN_DEBUG "Disabling unused clock \"%s\"\n" , clk->name);if (cpu_is_omap34xx ()) {omap2_clk_enable (clk);omap2_clk_disable (clk);
Few notes. I'm just trying to clean up our system, because it prints too much to serial line. The clocks prints are not very bad, but I still find them a little bit excessive. Thus, suggested a patch.
But if you think PM is in a stage when it still needs some debugging printing, I'm not going to insist, of course. You could do this later, when stuff is more stable.
Signature · 6 lines
Best Regards, Artem Bityutskiy (Артём Битюцкий) -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Tony Lindgren
maintainerQuoted 77 lines · Artem Bityutskiy
Quoted 63 lines · Artem Bityutskiy
Disabling unused clock "
gpt2_ick" Disabling unused clock "gpt3_ick" Disabling unused clock "gpt4_ick" Disabling unused clock "gpt5_ick" Disabling unused clock "gpt6_ick" Disabling unused clock "gpt7_ick" Disabling unused clock "gpt8_ick" Disabling unused clock "gpt9_ick" Disabling unused clock "gpio2_dbck" Disabling unused clock "gpio3_dbck" Disabling unused clock "gpio4_dbck" Disabling unused clock "gpio5_dbck" Disabling unused clock "gpio6_dbck" Disabling unused clock "gpt9_fck" Disabling unused clock "gpt8_fck" Disabling unused clock "gpt7_fck" Disabling unused clock "gpt6_fck" Disabling unused clock "gpt5_fck" Disabling unused clock "gpt4_fck" Disabling unused clock "gpt3_fck" Disabling unused clock "gpt2_fck" Disabling unused clock "wdt2_ick" Disabling unused clock "wdt2_fck" Disabling unused clock "gpio1_dbck" Disabling unused clock "rng_ick" Disabling unused clock "ssi_ick" Disabling unused clock "gpt10_ick" Disabling unused clock "gpt11_ick" Disabling unused clock "uart1_ick" Disabling unused clock "uart2_ick" Disabling unused clock "usbtll_ick" Disabling unused clock "ssi_ssr_fck" Disabling unused clock "uart1_fck" Disabling unused clock "uart2_fck" Disabling unused clock "usbtll_fck" Disabling unused clock "ts_fck" Disabling unused clock "cpefuse_fck" Disabling unused clock "gpt11_fck" Disabling unused clock "gpt10_fck" Disabling unused clock "dpll5_ck" Disabling unused clock "dpll4_m6x2_ck" Disabling unused clock "dpll4_m5x2_ck" Disabling unused clock "dpll3_m3x2_ck" Disabling unused clock "sys_clkout1"The messages have
KERN_INFOlevel and if you have serial console, they normally go there. I do not think it is good idea to print that much stuff there. Moreover, messages are not properly prefixed and for mortals it is not immeadietly clear where they come from.Let's give them debugging level instead.
Signed-off-by Artem Bityutskiy <[email protected]>--- arch/arm/mach-omap2/clock.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)arch/arm/mach-omap2/clock.c +0
-0arch/arm/mach-omap2/clock.c void omap2_clk_disable_unused(struct clk *clk) · line 1041
Quoted 7 lines
arch/arm/mach-omap2/clock.c +1
-0@@ -1035,7 +1035,7 @@ void omap2_clk_disable_unused(struct clk *clk)if ((regval32 & (1 << clk->enable_bit)) == v)return ; -printk (KERN_INFO "Disabling unused clock \"%s\"\n" , clk->name); +printk (KERN_DEBUG "Disabling unused clock \"%s\"\n" , clk->name);if (cpu_is_omap34xx ()) {omap2_clk_enable (clk);omap2_clk_disable (clk);Few notes. I'm just trying to clean up our system, because it prints too much to serial line. The clocks prints are not very bad, but I still find them a little bit excessive. Thus, suggested a patch.
Quoted 3 lines
But if you think PM is in a stage when it still needs some debugging printing, I'm not going to insist, of course. You could do this later, when stuff is more stable.
These lines have been very informative when the boot fails mysteriously. But I'd be fine seeing it only if debug is specified in cmdline.
Tony
Paul Walmsley
maintainerHi Artem,
Quoted 8 lines · Artem Bityutskiy
If you do not want re-compilation, I may send a different patch like this:
arch/arm/mach-omap2/clock.c +1
-1-printk (KERN_INFO "Disabling unused clock \"%s\"\n" , clk->name); +printk (KERN_DEBUG "Disabling unused clock \"%s\"\n" , clk->name);in which case you would not loose the messages, but the messages would not go to the serial line.
Yes, that patch is fine. I'll add that to the omap-clock-upstream branch.
- Paul
Quoted 18 lines · Artem Bityutskiy
Hi,
Quoted 5 lines · Paul Walmsley
stil thinking about it. These messages have made it easy to catch bugs with the PM code in the past (e.g., sad2d). Making them debug-level will require booting a kernel with clock debugging specifically compiled in. So I wonder if there might be a better way to deal with these...
Yeah, I see your concern. I'm your user, and from my perspective this is an excessive output to slow serial line.
If you do not want re-compilation, I may send a different patch like this:
arch/arm/mach-omap2/clock.c +1
-1-printk (KERN_INFO "Disabling unused clock \"%s\"\n" , clk->name); +printk (KERN_DEBUG "Disabling unused clock \"%s\"\n" , clk->name);
Quoted 3 lines
in which case you would not loose the messages, but the messages would not go to the serial line.
I prefer this method as well since i can see them simply by adding debug to the cmdline.
Kevin
Quoted 15 lines · Kevin Hilman
Quoted 13 lines · Artem Bityutskiy
Hi,
Quoted 1 line · Paul Walmsley
stil thinking about it. These messages have made it easy to catch bugs with the PM code in the past (e.g., sad2d). Making them debug-level will require booting a kernel with clock debugging specifically compiled in. So I wonder if there might be a better way to deal with these...
Yeah, I see your concern. I'm your user, and from my perspective this is an excessive output to slow serial line.
If you do not want re-compilation, I may send a different patch like this:
arch/arm/mach-omap2/clock.c +1
-1-printk (KERN_INFO "Disabling unused clock \"%s\"\n" , clk->name); +printk (KERN_DEBUG "Disabling unused clock \"%s\"\n" , clk->name);
Quoted 7 lines
Quoted 3 lines
in which case you would not loose the messages, but the messages would not go to the serial line.
I prefer this method as well since i can see them simply by adding debug to the cmdline.
Fine with me, thanks for looking at this.
Signature · 6 lines
Best Regards, Artem Bityutskiy (Артём Битюцкий) -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html