Skip to contentSkip to conversation

Boot program interface

DISCUSSION Carlos Mitidieri 3 participants 5 messages Apr 20, 2009 – Apr 21, 2009 MIPS

lore
Share & tools
lore
#0 lore raw

Hello,

I am working on a project that requires an extensive boot program interface.

It turns out that the device tree used on PPC architecture meets the requirements.

I have been looking, and I could not find any similar concept implemented for MIPS.

So, I am now considering to port the OFDT library into the MIPS arch.

What do you think about this? Is there anyone working on a similar project?

Best regards,

Signature · 2 lines
Carlos Mitidieri
Project Engineer
#1 lore raw

Hi Carlos,

Le Monday 20 April 2009 09:37:25 Carlos Mitidieri, vous avez écrit :

Quoted 10 lines

Hello,

I am working on a project that requires an extensive boot program interface.

It turns out that the device tree used on PPC architecture meets the requirements.

I have been looking, and I could not find any similar concept implemented for MIPS.

I do not know any MIPS board using a device tree either.

Quoted 4 lines

So, I am now considering to port the OFDT library into the MIPS arch.

What do you think about this? Is there anyone working on a similar project?

You should see how Sparc, PowerPC and Microblaze use it and how they do share code. Also condiser seeing how u-boot handles device trees, specifically on PowerPC and Microblaze.

Hope that helps.

Signature · 4 lines
Best regards, Florian Fainelli
Email : [email protected]
http://openwrt.org
-------------------------------
#2 lore raw

Hi,

Quoted 17 lines

Hi Carlos,

Le Monday 20 April 2009 09:37:25 Carlos Mitidieri, vous avez écrit :

Quoted 10 lines

Hello,

I am working on a project that requires an extensive boot program interface.

It turns out that the device tree used on PPC architecture meets the requirements.

I have been looking, and I could not find any similar concept implemented for MIPS.

I do not know any MIPS board using a device tree either.

Quoted 1 line
Quoted 7 lines
Quoted 3 lines

So, I am now considering to port the OFDT library into the MIPS arch.

What do you think about this? Is there anyone working on a similar project?

You should see how Sparc, PowerPC and Microblaze use it and how they do share code. Also condiser seeing how u-boot handles device trees, specifically on PowerPC and Microblaze.

Ok, but what you think about doing such a port? I mean, is it something that could be eventually accepted by the MIPS Linux community? Or do you have problems with this approach?

I am looking forward for your answers.

Kind regards,

Signature · 2 lines
Carlos Mitidieri
Project Engineer
#3 lore raw
In reply to Florian Fainelli

We have a working version of the device tree for MIPS. I'll see if we can expedite a patch.

Quoted 46 lines

-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Florian Fainelli
Sent: Monday, April 20, 2009 1:57 AM
To: Carlos Mitidieri
Cc: [email protected]
Subject: Re: Boot program interface

Hi Carlos,

Le Monday 20 April 2009 09:37:25 Carlos Mitidieri, vous avez écrit :

Quoted 9 lines

Hello,

I am working on a project that requires an extensive boot program interface.

It turns out that the device tree used on PPC architecture meets the requirements.

I have been looking, and I could not find any similar

concept implemented

Quoted 1 line

for MIPS.

I do not know any MIPS board using a device tree either.

Quoted 2 lines

So, I am now considering to port the OFDT library into the

MIPS arch.

Quoted 2 lines

What do you think about this? Is there anyone working on a

similar project?

You should see how Sparc, PowerPC and Microblaze use it and how they do share
code. Also condiser seeing how u-boot handles device trees, specifically on
PowerPC and Microblaze.

Hope that helps.

Signature · 4 lines
Best regards, Florian Fainelli
Email : [email protected]
http://openwrt.org
-------------------------------
#4 lore raw

Hello,

That would be nice. Would be that convenient, I am willing to help.

Best regards,

Quoting "David VomLehn (dvomlehn)" <[email protected]>:

Quoted 50 lines

We have a working version of the device tree for MIPS. I'll see if we can expedite a patch.

Quoted 46 lines

-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Florian Fainelli
Sent: Monday, April 20, 2009 1:57 AM
To: Carlos Mitidieri
Cc: [email protected]
Subject: Re: Boot program interface

Hi Carlos,

Le Monday 20 April 2009 09:37:25 Carlos Mitidieri, vous avez écrit :

Quoted 9 lines

Hello,

I am working on a project that requires an extensive boot program interface.

It turns out that the device tree used on PPC architecture meets the requirements.

I have been looking, and I could not find any similar

concept implemented

Quoted 1 line

for MIPS.

I do not know any MIPS board using a device tree either.

Quoted 2 lines

So, I am now considering to port the OFDT library into the

MIPS arch.

Quoted 2 lines

What do you think about this? Is there anyone working on a

similar project?

You should see how Sparc, PowerPC and Microblaze use it and how they do share
code. Also condiser seeing how u-boot handles device trees, specifically on
PowerPC and Microblaze.

Hope that helps.
--
Best regards, Florian Fainelli
Email : [email protected]
http://openwrt.org
-------------------------------

Signature · 2 lines
Carlos Mitidieri
Project Engineer