Skip to contentSkip to conversation

Fusion-IO

DISCUSSION Clive Wagenaar 3 participants 4 messages Apr 29, 2009 – May 6, 2009

lore
Share & tools
lore
#0 lore raw

Hi There

Could you advise info on your Fusion-IO IODrives.
http://www.fusionio.com/

Has Fusion-IO managed to release the ioxtreme yet?
If not do you have a indication of when it may be released and how much it will be, obviously ballpark stuff here.
http://www.fusionio.com/PressDetails.php?id=46

Also for fun what is pricing of:
PCI-E X4 cards: 80/160/320GB, as per your site.

Can you deliver to Ireland?

I take it one would have to compile the drivers from source if ones kernel is later than the drivers they have on their site for ones kernel?
The latest Ubuntu one they have under support section of their site is:
iodrive-driver_1.2.4-1.7-2.6.24_22_generic_amd64.deb
(i.e only for kernel 2.6.24-22)

Will the driver be incorporated into the Linux kernel directly? Has Fusion-IO given one of these to Linus Torvalds yet to get the driver into the mainline kernel and have it optimized for Linux?
http://www.kernel.org/pub/linux/docs/lkml/
Linus Torvalds: [email protected]
Alan Cox: [email protected]

With reference to booting off a PCI-E:
If they had the ioxtreme available, I take it one could have '/' and '/home' on the io-drive and only need to have '/boot' on a conventional sata type sdd/hdd drive?
(I.E I take it one cant boot directly off a PCI-E drive?)

Hope some of this makes sense.

Regards

-
[email protected]

System Powered by:
Ubuntu/Debian/Gnu/Linux
Ver: Jaunty 9.04
Kernel 2.6.28-11-generic
Gnu+Linux user #419390
Ubuntu user #1072

#1 lore raw

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Quoted 1 line · On Wed, 29 Apr 2009 19:04:43 +0100 Clive Wagenaar <[email protected]>…

Has Fusion-IO managed to release the ioxtreme yet?

Yes, we got our hands on a 80GB unit this morning. They're out in the United Kingdom. It was 3600GBP + VAT.

Quoted 1 line

Can you deliver to Ireland?

You should probably talk to DiamondPoint, which is where ours came from:
http://www.dpie.com/contact.html

They should be responsive, but if not, e-mail me and I'll get you a direct contact.

Quoted 3 lines

I take it one would have to compile the drivers from source if ones kernel is later than the drivers they have on their site for ones kernel?

- From what I can see they offer kernel sources. The OS selection is a bit pedestrian, but with some searching you can find a tarball.

Quoted 2 lines

Will the driver be incorporated into the Linux kernel
directly?

If you talk to FusionIO, please suggest Greg's staging tree to them. They could submit their current driver and have volunteers improve on it until it gets to a state where it can enter the mainline kernel.

Regards,
Tony V.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.11 (GNU/Linux)

iEYEARECAAYFAkoBeY8ACgkQp5vW4rUFj5qCEgCcDBq5Rn8zRfrzCuWxGGWfZZhW
5IgAoJ/lBXhxvKiMyMvJwHBIDaC4o53a
=IbkO
-----END PGP SIGNATURE----- ÿôèº{.nÇ+‰·Ÿ®‰­†+%ŠËÿ±éݶ¥Šwÿº{.nÇ+‰·¥Š{±þG«�éÿŠ{ayºʇڙë,j­¢f£¢·hš�ï�êÿ‘êçz_è®(­éšŽŠÝ¢j"�ú¶m§ÿÿ¾«þG«�éÿ¢¸?™¨è­Ú&£ø§~�á¶iO•æ¬z·švØ^¶m§ÿÿà ÿ¶ìÿ¢¸?–I¥

#2 lore raw
In reply to Tony Vroon
Quoted 38 lines · Tony Vroon

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Quoted 1 line · On Wed, 29 Apr 2009 19:04:43 +0100 Clive Wagenaar <[email protected]>…

Has Fusion-IO managed to release the ioxtreme yet?

Yes, we got our hands on a 80GB unit this morning. They're out in the United Kingdom. It was 3600GBP + VAT.

Quoted 1 line

Can you deliver to Ireland?

You should probably talk to DiamondPoint, which is where ours came from:
http://www.dpie.com/contact.html

They should be responsive, but if not, e-mail me and I'll get you a direct contact.

Quoted 3 lines

I take it one would have to compile the drivers from source if ones kernel is later than the drivers they have on their site for ones kernel?

- From what I can see they offer kernel sources. The OS selection is a bit pedestrian, but with some searching you can find a tarball.

Quoted 2 lines

Will the driver be incorporated into the Linux kernel
directly?

If you talk to FusionIO, please suggest Greg's staging tree to them. They could submit their current driver and have volunteers improve on it until it gets to a state where it can enter the mainline kernel.

Regards,
Tony V.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.11 (GNU/Linux)

Quoted 4 lines

iEYEARECAAYFAkoBeY8ACgkQp5vW4rUFj5qCEgCcDBq5Rn8zRfrzCuWxGGWfZZhW 5IgAoJ/lBXhxvKiMyMvJwHBIDaC4o53a
=IbkO
-----END PGP SIGNATURE-----

I ended up with a OCZ Vertex 120G SDD for under €400, 200MB/s read, they seem very active with their firmware updates, also very responsive to user feedback.
The drive is probably a bit slower than the x25-m, but then a lot cheaper and they seem alot more customer focused and should support trim before Intel on the x25 drives

It arrived today, Ubuntu 9.04 boots in 11 seconds on bootchart and 15 seconds to get into GDM with Arora browser at google homepage. Best I got with 7200 Seagate Barracuda drive was 17 seconds. As a whole desktop is very response for now.
Will be fine as 120G drive and 9.04 only uses 4G on my setup. I will reflash if its slows down before 'trim' happen between Ocz and Linux.

Within the next 2 weeks they will be releasing new firmware that will support the trim ATA 'standard' for the linux kernel.
They have a tool/exe the runs under 32 windows to trim the drive for windows file-systems, but its not integrated into Windows as they waiting, zzz, for MS to implement it which could be window 7 release, or maybe only W7 + SP1. (Does not help that the ATA standard is not yet approved). Their Windows exe runs from within widoews, but obviously only trims windows filesystems

Tony, the main forum staff chap, indicates native linux support soon:
http://www.ocztechnologyforum.com/forum/showthread.php?t=55632&highlight=trim+linux

Snip:
Mid May or earlier we should see a new FW with native Linux TRIM for beta testing

I will be testing it and have plenty of time to test for Linux kernel devs or OCZ, this is why I bought the drive .

If I can help test trim under Linux, it would be my pleasure.

Signature · 9 lines
[email protected]

System Powered by:
Ubuntu/Debian/Gnu/Linux
Distro: Jaunty 9.04
Kernel: 2.6.30-rc4-generic
File System: Ext4
Gnu+Linux user #419390
Ubuntu user #1072