Skip to contentSkip to conversation

Add config option for disabling DM9000-SROM support.

PATCH New Remy Bohmer 5 participants 8 messages May 3, 2009 – May 4, 2009

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Add config option for disabling DM9000-SROM support.

Some boards do not have SROM support for the DM9000 network adapter. Instead of listing these board names in the driver code, make this option configurable from the board config file.

It also removes a build warning for the at91sam9261ek board:
'dm9000x.c:545: warning: 'read_srom_word' defined but not used'

And it repaires the trizepsiv board build which was broken around the same routines

---
 board/trizepsiv/eeprom.c        |   14 +++++++-------
 drivers/net/dm9000x.c           |   16 ++++++++--------
 include/configs/at91sam9261ek.h |    1 +
 include/dm9000.h                |   11 +++++++++++
 4 files changed, 27 insertions(+), 15 deletions(-)
 create mode 100644 include/dm9000.h
board/trizepsiv/eeprom.c +7 -7
index 63f1c6c..9fa7aef 100644
@@ -23,17 +23,17 @@
 
 #include <common.h>
 #include <command.h>
-
-extern u16 read_srom_word(int);
-extern void write_srom_word(int offset, u16 val);
+#include <dm9000.h>
 
 static int do_read_dm9000_eeprom ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) {
-	int i;
+	unsigned int i;
+	u8 data[2];
 
 	for (i=0; i < 0x40; i++) {
 		if (!(i % 0x10))
-			printf("\n%08lx:", i);
-		printf(" %04x", read_srom_word(i));
+			printf("\n%08x:", i);
+		dm9000_read_srom_word(i, data);
+		printf(" %02x%02x", data[1], data[0]);
 	}
 	printf ("\n");
 	return (0);
@@ -54,7 +54,7 @@ static int do_write_dm9000_eeprom ( cmd_tbl_t *cmdtp, int flag, int argc, char *
 		cmd_usage(cmdtp);
 		return 1;
 	}
-	write_srom_word(offset, value);
+	dm9000_write_srom_word(offset, value);
 	return (0);
 }
 
drivers/net/dm9000x.c +8 -8
index 8ca2bf7..934d991 100644
@@ -53,7 +53,7 @@ v1.2   03/18/2003       Weilun Huang <[email protected]>:
 			  notes (i.e. double reset)
 			- some minor code cleanups
 			These changes are tested with DM9000{A,EP,E} together
-			with a 200MHz Atmel AT91SAM92161 core
+			with a 200MHz Atmel AT91SAM9261 core
 
 TODO: external MII is not functional, only internal at the moment.
 */
@@ -62,6 +62,7 @@ TODO: external MII is not functional, only internal at the moment.
 #include <command.h>
 #include <net.h>
 #include <asm/io.h>
+#include <dm9000.h>
 
 #include "dm9000x.h"
 
@@ -113,7 +114,6 @@ void eth_halt(void);
 static int dm9000_probe(void);
 static u16 phy_read(int);
 static void phy_write(int, u16);
-static void read_srom_word(int, u8 *);
 static u8 DM9000_ior(int);
 static void DM9000_iow(int reg, u8 value);
 
@@ -347,9 +347,9 @@ eth_init(bd_t * bd)
 
 	/* Set Node address */
 	if (!eth_getenv_enetaddr("ethaddr", enetaddr)) {
-#if !defined(CONFIG_AT91SAM9261EK)
+#if !defined(CONFIG_DM9000_NO_SROM_AVAIL)
 		for (i = 0; i < 3; i++)
-			read_srom_word(i, enetaddr + 2 * i);
+			dm9000_read_srom_word(i, enetaddr + 2 * i);
 		eth_setenv_enetaddr("ethaddr", enetaddr);
 #endif
 	}
@@ -541,7 +541,8 @@ eth_rx(void)
 /*
   Read a word data from SROM
 */
-static void read_srom_word(int offset, u8 *to)
+#if !defined(CONFIG_DM9000_NO_SROM_AVAIL)
+void dm9000_read_srom_word(int offset, u8 *to)
 {
 	DM9000_iow(DM9000_EPAR, offset);
 	DM9000_iow(DM9000_EPCR, 0x4);
@@ -551,8 +552,7 @@ static void read_srom_word(int offset, u8 *to)
 	to[1] = DM9000_ior(DM9000_EPDRH);
 }
 
-void
-write_srom_word(int offset, u16 val)
+void dm9000_write_srom_word(int offset, u16 val)
 {
 	DM9000_iow(DM9000_EPAR, offset);
 	DM9000_iow(DM9000_EPDRH, ((val >> 8) & 0xff));
@@ -561,7 +561,7 @@ write_srom_word(int offset, u16 val)
 	udelay(8000);
 	DM9000_iow(DM9000_EPCR, 0);
 }
-
+#endif
 
 /*
    Read a byte from I/O port
include/configs/at91sam9261ek.h +1 -0
index fdaa71c..c30674f 100644
@@ -137,6 +137,7 @@
 #define DM9000_IO			CONFIG_DM9000_BASE
 #define DM9000_DATA			(CONFIG_DM9000_BASE + 4)
 #define CONFIG_DM9000_USE_16BIT		1
+#define CONFIG_DM9000_NO_SROM_AVAIL     1
 #define CONFIG_NET_RETRY_COUNT		20
 #define CONFIG_RESET_PHY_R		1
 
include/dm9000.h new file +11 -0
new file mode 100644
index 0000000..d59919b
@@ -0,0 +1,11 @@
+
+#ifndef __DM9000_H__
+#define __DM9000_H__
+
+/******************  function prototypes **********************/
+#if !defined(CONFIG_DM9000_NO_SROM_AVAIL)
+void dm9000_write_srom_word(int offset, u16 val);
+void dm9000_read_srom_word(int offset, u8 *to);
+#endif
+
+#endif /* __DM9000_H__ */
Signature · 1 line
1.6.0.4
#1 lore raw

PATCH 1/1 Add config option for disabling DM9000-SROM support.

Quoted 9 lines · Remy Bohmer

Some boards do not have SROM support for the DM9000 network adapter. Instead of listing these board names in the driver code, make this option configurable from the board config file.

It also removes a build warning for the at91sam9261ek board:
'dm9000x.c:545: warning: 'read_srom_word' defined but not used'

And it repaires the trizepsiv board build which was broken around the same routines

please put Stelian in Cc

Quoted 22 lines
---
 board/trizepsiv/eeprom.c        |   14 +++++++-------
 drivers/net/dm9000x.c           |   16 ++++++++--------
 include/configs/at91sam9261ek.h |    1 +
 include/dm9000.h                |   11 +++++++++++
 4 files changed, 27 insertions(+), 15 deletions(-)
 create mode 100644 include/dm9000.h
board/trizepsiv/eeprom.c +0 -1
index 63f1c6c..9fa7aef 100644
@@ -23,17 +23,17 @@
 
 #include <common.h>
 #include <command.h>
-
 
 

board/trizepsiv/eeprom.c eth_init(bd_t * bd) · line 350

Quoted 5 lines
board/trizepsiv/eeprom.c +1 -1
@@ -347,9 +347,9 @@ eth_init(bd_t * bd)
 
 	/* Set Node address */
 	if (!eth_getenv_enetaddr("ethaddr", enetaddr)) {
-#if !defined(CONFIG_AT91SAM9261EK)
+#if !defined(CONFIG_DM9000_NO_SROM_AVAIL)

CONFIG_DM9000_NO_SROM will be shorter and the same

include/dm9000.h

Quoted 13 lines
board/trizepsiv/eeprom.c +1 -1
 		for (i = 0; i < 3; i++)
-			read_srom_word(i, enetaddr + 2 * i);
+			dm9000_read_srom_word(i, enetaddr + 2 * i);
 		eth_setenv_enetaddr("ethaddr", enetaddr);
 #endif
 
include/dm9000.h new file +0 -0
new file mode 100644
index 0000000..d59919b

Ben what do you think to do as usb have a dir to store all net header include/net/

include/dm9000.h

Quoted 1 line
include/dm9000.h new file +0 -0
@@ -0,0 +1,11 @@

Copyrigth?

include/dm9000.h line 3

Quoted 3 lines
include/dm9000.h new file +3 -0
+
+#ifndef __DM9000_H__
+#define __DM9000_H__

Best Regards,
J.

#2 lore raw

PATCH 1/1 Add config option for disabling DM9000-SROM support.

Hello,

2009/5/3 Jean-Christophe PLAGNIOL-VILLARD <[email protected]>:

Quoted 11 lines · Remy Bohmer
Quoted 9 lines

Some boards do not have SROM support for the DM9000 network adapter. Instead of listing these board names in the driver code, make this option configurable from the board config file.

It also removes a build warning for the at91sam9261ek board:
'dm9000x.c:545: warning: 'read_srom_word' defined but not used'

And it repaires the trizepsiv board build which was broken around the same routines

please put Stelian in Cc

Done!

Quoted 20 lines
Quoted 18 lines

---

?board/trizepsiv/eeprom.c ? ? ? ?| ? 14 +++++++-------
?drivers/net/dm9000x.c ? ? ? ? ? | ? 16 ++++++++--------
?include/configs/at91sam9261ek.h | ? ?1 +
?include/dm9000.h ? ? ? ? ? ? ? ?| ? 11 +++++++++++

?4 files changed, 27 insertions(+), 15 deletions(-) ?create mode 100644 include/dm9000.h

board/trizepsiv/eeprom.c +0 -0
index 63f1c6c..9fa7aef 100644
@@ -23,17 +23,17 @@
 

?#include <common.h>
?#include <command.h>
-

Quoted 7 lines

board/trizepsiv/eeprom.c

Quoted 6 lines
board/trizepsiv/eeprom.c +0 -0
@@ -347,9 +347,9 @@ eth_init(bd_t * bd)
 

? ? ? /* Set Node address */
? ? ? if (!eth_getenv_enetaddr("ethaddr", enetaddr)) {

board/trizepsiv/eeprom.c +1 -1
-#if !defined(CONFIG_AT91SAM9261EK)
+#if !defined(CONFIG_DM9000_NO_SROM_AVAIL)

CONFIG_DM9000_NO_SROM will be shorter and the same

OK

Quoted 8 lines
Quoted 8 lines

? ? ? ? ? ? ? for (i = 0; i < 3; i++)
- ? ? ? ? ? ? ? ? ? ? read_srom_word(i, enetaddr + 2 * i);
+ ? ? ? ? ? ? ? ? ? ? dm9000_read_srom_word(i, enetaddr + 2 * i); ? ? ? ? ? ? ? eth_setenv_enetaddr("ethaddr", enetaddr); ?#endif

Quoted 7 lines

include/dm9000.h

Quoted 5 lines
include/dm9000.h new file +0 -0
new file mode 100644
index 0000000..d59919b

Ben what do you think to do as usb have a dir to store all net header include/net/

I have chosen the same location as the dm9161.h, other similar headers are there as well.
If it has to be changed, I suggest making it a separate patch.

Quoted 2 lines

include/dm9000.h

Quoted 1 line
include/dm9000.h new file +0 -0
@@ -0,0 +1,11 @@

Copyrigth?

OK.

Quoted 7 lines

include/dm9000.h line 3

Quoted 3 lines
include/dm9000.h new file +3 -0
+
+#ifndef __DM9000_H__
+#define __DM9000_H__

Best Regards,
J.

#3 lore raw

PATCH 1/1 Add config option for disabling DM9000-SROM support.

Quoted 8 lines
Quoted 4 lines

include/dm9000.h

Quoted 2 lines
include/dm9000.h new file +0 -0

Ben what do you think to do as usb have a dir to store all net header include/net/

I have chosen the same location as the dm9161.h, other similar headers are there as well.
If it has to be changed, I suggest making it a separate patch.

sure

I've in mind this

include/{ => net}/at91rm9200_net.h
include/{ => net}/bcm5221.h
include/{ => net}/dm9161.h
include/{ => net}/dp83848.h
include/{ => net}/lxt971a.h
include/{ => net}/mii_phy.h
include/{ => net}/miiphy.h
include/{ => net}/ns7520_eth.h
include/{ => net}/ns9750_eth.h
include/{ => net}/ppc4xx_enet.h
include/{ => net}/tsec.h

or

include/{ => net}/at91rm9200_net.h
include/{ => net}/ns7520_eth.h
include/{ => net}/ns9750_eth.h
include/{ => net}/ppc4xx_enet.h
include/{ => net}/tsec.h
include/{ => net/phy}/bcm5221.h
include/{ => net/phy}/dm9161.h
include/{ => net/phy}/dp83848.h
include/{ => net/phy}/lxt971a.h
include/{ => net/phy}/mii_phy.h
include/{ => net/phy}/miiphy.h

and maybe
include/{ => net}/netdev.h

Best Regards,
J.

#4 lore raw

PATCH 1/1 Add config option for disabling DM9000-SROM support.

Hi J-C,

Quoted 38 lines · Jean-Christophe PLAGNIOL-VILLARD
Quoted 8 lines
Quoted 4 lines

include/dm9000.h

Quoted 2 lines
include/dm9000.h new file +0 -0

Ben what do you think to do as usb have a dir to store all net header include/net/

I have chosen the same location as the dm9161.h, other similar headers are there as well.
If it has to be changed, I suggest making it a separate patch.

sure

I've in mind this

include/{ => net}/at91rm9200_net.h
include/{ => net}/bcm5221.h
include/{ => net}/dm9161.h
include/{ => net}/dp83848.h
include/{ => net}/lxt971a.h
include/{ => net}/mii_phy.h
include/{ => net}/miiphy.h
include/{ => net}/ns7520_eth.h
include/{ => net}/ns9750_eth.h
include/{ => net}/ppc4xx_enet.h
include/{ => net}/tsec.h

or

include/{ => net}/at91rm9200_net.h
include/{ => net}/ns7520_eth.h
include/{ => net}/ns9750_eth.h
include/{ => net}/ppc4xx_enet.h
include/{ => net}/tsec.h
include/{ => net/phy}/bcm5221.h
include/{ => net/phy}/dm9161.h
include/{ => net/phy}/dp83848.h
include/{ => net/phy}/lxt971a.h
include/{ => net/phy}/mii_phy.h
include/{ => net/phy}/miiphy.h

Quoted 6 lines

and maybe
include/{ => net}/netdev.h

Best Regards,
J.

I'm not crazy about this idea - it seems like unnecessary hierarchy when efforts could be diverted elsewhere. There are very few net-related public header files (as you've shown) and browsing through them, there's a lot of duplication of 802.3-defined PHY stuff and register definitions that are really private to the drivers themselves. Ideally we would have very little in the way of device-specific public functions apart from xxx_initialize().
I'm OK with having device-specific prototypes and struct definitions in
netdev.h - that's what it was created for in the first place. As long as there's no code there (including static inlines) it seems appropriate.

regards,
Ben

#5 lore raw

PATCH 1/1 V2 Add config option for disabling DM9000-SROM support.

In reply to Jean-Christophe PLAGNIOL-VILLARD

V2: reworked comments from Jean-Christophe PLAGNIOL-VILLARD

Some boards do not have SROM support for the DM9000 network adapter. Instead of listing these board names in the driver code, make this option configurable from the board config file.

It also removes a build warning for the at91sam9261ek board:
'dm9000x.c:545: warning: 'read_srom_word' defined but not used'

And it repaires the trizepsiv board build which was broken around the same routines

---
 board/trizepsiv/eeprom.c        |   14 +++++++-------
 drivers/net/dm9000x.c           |   16 ++++++++--------
 include/configs/at91sam9261ek.h |    1 +
 include/dm9000.h                |   20 ++++++++++++++++++++
 4 files changed, 36 insertions(+), 15 deletions(-)
 create mode 100644 include/dm9000.h
board/trizepsiv/eeprom.c +7 -7
index 63f1c6c..9fa7aef 100644
@@ -23,17 +23,17 @@
 
 #include <common.h>
 #include <command.h>
-
-extern u16 read_srom_word(int);
-extern void write_srom_word(int offset, u16 val);
+#include <dm9000.h>
 
 static int do_read_dm9000_eeprom ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) {
-	int i;
+	unsigned int i;
+	u8 data[2];
 
 	for (i=0; i < 0x40; i++) {
 		if (!(i % 0x10))
-			printf("\n%08lx:", i);
-		printf(" %04x", read_srom_word(i));
+			printf("\n%08x:", i);
+		dm9000_read_srom_word(i, data);
+		printf(" %02x%02x", data[1], data[0]);
 	}
 	printf ("\n");
 	return (0);
@@ -54,7 +54,7 @@ static int do_write_dm9000_eeprom ( cmd_tbl_t *cmdtp, int flag, int argc, char *
 		cmd_usage(cmdtp);
 		return 1;
 	}
-	write_srom_word(offset, value);
+	dm9000_write_srom_word(offset, value);
 	return (0);
 }
 
drivers/net/dm9000x.c +8 -8
index 8ca2bf7..f139435 100644
@@ -53,7 +53,7 @@ v1.2   03/18/2003       Weilun Huang <[email protected]>:
 			  notes (i.e. double reset)
 			- some minor code cleanups
 			These changes are tested with DM9000{A,EP,E} together
-			with a 200MHz Atmel AT91SAM92161 core
+			with a 200MHz Atmel AT91SAM9261 core
 
 TODO: external MII is not functional, only internal at the moment.
 */
@@ -62,6 +62,7 @@ TODO: external MII is not functional, only internal at the moment.
 #include <command.h>
 #include <net.h>
 #include <asm/io.h>
+#include <dm9000.h>
 
 #include "dm9000x.h"
 
@@ -113,7 +114,6 @@ void eth_halt(void);
 static int dm9000_probe(void);
 static u16 phy_read(int);
 static void phy_write(int, u16);
-static void read_srom_word(int, u8 *);
 static u8 DM9000_ior(int);
 static void DM9000_iow(int reg, u8 value);
 
@@ -347,9 +347,9 @@ eth_init(bd_t * bd)
 
 	/* Set Node address */
 	if (!eth_getenv_enetaddr("ethaddr", enetaddr)) {
-#if !defined(CONFIG_AT91SAM9261EK)
+#if !defined(CONFIG_DM9000_NO_SROM)
 		for (i = 0; i < 3; i++)
-			read_srom_word(i, enetaddr + 2 * i);
+			dm9000_read_srom_word(i, enetaddr + 2 * i);
 		eth_setenv_enetaddr("ethaddr", enetaddr);
 #endif
 	}
@@ -541,7 +541,8 @@ eth_rx(void)
 /*
   Read a word data from SROM
 */
-static void read_srom_word(int offset, u8 *to)
+#if !defined(CONFIG_DM9000_NO_SROM)
+void dm9000_read_srom_word(int offset, u8 *to)
 {
 	DM9000_iow(DM9000_EPAR, offset);
 	DM9000_iow(DM9000_EPCR, 0x4);
@@ -551,8 +552,7 @@ static void read_srom_word(int offset, u8 *to)
 	to[1] = DM9000_ior(DM9000_EPDRH);
 }
 
-void
-write_srom_word(int offset, u16 val)
+void dm9000_write_srom_word(int offset, u16 val)
 {
 	DM9000_iow(DM9000_EPAR, offset);
 	DM9000_iow(DM9000_EPDRH, ((val >> 8) & 0xff));
@@ -561,7 +561,7 @@ write_srom_word(int offset, u16 val)
 	udelay(8000);
 	DM9000_iow(DM9000_EPCR, 0);
 }
-
+#endif
 
 /*
    Read a byte from I/O port
include/configs/at91sam9261ek.h +1 -0
index fdaa71c..9621b7c 100644
@@ -137,6 +137,7 @@
 #define DM9000_IO			CONFIG_DM9000_BASE
 #define DM9000_DATA			(CONFIG_DM9000_BASE + 4)
 #define CONFIG_DM9000_USE_16BIT		1
+#define CONFIG_DM9000_NO_SROM		1
 #define CONFIG_NET_RETRY_COUNT		20
 #define CONFIG_RESET_PHY_R		1
 
include/dm9000.h new file +20 -0
new file mode 100644
index 0000000..76f9bfd
@@ -0,0 +1,20 @@
+/*
+ * NOTE:        DAVICOM DM9000 ethernet driver interface
+ *
+ * Authors:     Remy Bohmer <[email protected]>
+ *
+ *              This program is free software; you can redistribute it and/or
+ *              modify it under the terms of the GNU General Public License
+ *              as published by the Free Software Foundation; either version
+ *              2 of the License, or (at your option) any later version.
+ */
+#ifndef __DM9000_H__
+#define __DM9000_H__
+
+/******************  function prototypes **********************/
+#if !defined(CONFIG_DM9000_NO_SROM)
+void dm9000_write_srom_word(int offset, u16 val);
+void dm9000_read_srom_word(int offset, u8 *to);
+#endif
+
+#endif /* __DM9000_H__ */
Signature · 1 line
1.6.0.4
#6 lore raw

PATCH 1/1 V2 Add config option for disabling DM9000-SROM support.

Quoted 11 lines · Remy Bohmer

Some boards do not have SROM support for the DM9000 network adapter. Instead of listing these board names in the driver code, make this option configurable from the board config file.

It also removes a build warning for the at91sam9261ek board:
'dm9000x.c:545: warning: 'read_srom_word' defined but not used'

And it repaires the trizepsiv board build which was broken around the same routines

FWIW:

Thanks,

Signature · 1 line
Stelian Pop <[email protected]>
#7 lore raw

PATCH 1/1 V2 Add config option for disabling DM9000-SROM support.

In reply to Remy Bohmer
Quoted 1 line · On Sunday 03 May 2009 06:11:40 Remy Bohmer wrote:

V2: reworked comments from Jean-Christophe PLAGNIOL-VILLARD

this should be below the "---" marker so that it doesnt show up in the changelog

similar comment with subject summary: no need for "1/1", the "v2" should be more in the "[PATCH v2]", and summaries do not get periods ...

Quoted 1 line

And it repaires the trizepsiv board build which was broken around the

there is no "e" in "repairs" ...
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
Url : http://lists.denx.de/pipermail/u-boot/attachments/20090504/d6db7f79/attachment.pgp