Skip to contentSkip to conversation

Resize physical volume SOLVED

linux-lvm [email protected] 1 participant 1 message May 6, 2009

lore
Share & tools
lore
#0 lore raw

Hi all

Just to let you all know, I finally got this sorted.

The problem was these partitions had been part of an md raid. By zeroing them out (mdadm wouldnt zero the superblock, but dding from /dev/zero worked) then following the exact same procedure it worked flawlessly.

Rgds
Karl

[email protected] wrote ..

Quoted 37 lines

Hi

Does anyone have any advice on this matter?

Regards
Karl

Karl Wagner wrote ..

Quoted 29 lines

Hi all

I have just been through a fairly major reorganisation of my data, and need to resize the physical volumes in my LVM setup.

Currently I have sd[a-d]6, which are physical volumes for the volume group �data�, and sd[a-d]7, which contain nothing. My plan was to get rid of p7 on each device and extend p6 to include that space. However when I tried on sda, I got an error after of Couldn't find device with uuid�

These are the steps I took:

* Deactivate all vg�s
* Fdisk /dev/sda
* Delete p7
* Delete p6
* Create p6 with start at start of old p6, end at end of old p7
* Write part table

At this point, sda7 has gone and sda6 is the correct size (checked with blockdev �getsz). But running a pvscan, lvm tells me it cant find sda6.

What am I missing?

Regards

Karl