2.6.30-rc4: microcode: failed to init CPU1
Hi,
With 2.6.30-rc4 I see this after resume from ram or disk. Here log from resume from disk:
[ 6643.757890] Breaking affinity for irq 23 [ 6643.759029] kvm: disabling virtualization on CPU1 [ 6643.859360] CPU 1 is now offline [ 6643.859366] SMP alternatives: switching to UP code [ 6643.869609] CPU1 is down [ 6643.869682] Extended CMOS year: 2000 [ 6643.869786] PM: Creating hibernation image: [ 6643.872676] PM: Need to copy 124075 pages [ 6643.872676] Intel machine check architecture supported. [ 6643.872676] Intel machine check reporting enabled on CPU#0. [ 6643.872676] PM: Restoring platform NVS memory [ 6643.872676] Extended CMOS year: 2000 [ 6643.872676] Enabling non-boot CPUs ... [ 6643.872676] SMP alternatives: switching to SMP code [ 6643.879652] CPU 1 irqstacks, hard=c20d6000 soft=c20d7000 [ 6643.879661] Booting processor 1 APIC 0x1 ip 0x6000 [ 6643.869076] Initializing CPU#1 [ 6643.869076] Calibrating delay using timer specific routine.. 3663.43 BogoMIPS (lpj=6103090) [ 6643.869076] CPU: L1 I cache: 32K, L1 D cache: 32K [ 6643.869076] CPU: L2 cache: 2048K [ 6643.869076] CPU: Physical Processor ID: 0 [ 6643.869076] CPU: Processor Core ID: 1 [ 6643.869076] Intel machine check architecture supported. [ 6643.869076] Intel machine check reporting enabled on CPU#1. [ 6643.973311] CPU1: Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08 [ 6643.973364] kvm: enabling virtualization on CPU1 [ 6643.973521] Switched to high resolution mode on CPU 1 [ 6643.982900] microcode: failed to init CPU1 [ 6643.983528] CPU1 is up [ 6643.984529] ACPI: Waking up from system sleep state S4 [ 6644.290917] pci 0000:00:1e.0: power state changed by ACPI to D0 [ 6644.291103] ata_piix 0000:00:1f.1: power state changed by ACPI to D0 [ 6644.291139] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800001, writing 0x2800005) [ 6644.291187] ata_piix 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00003, writing 0x2b00007) [ 6644.297593] pci 0000:00:07.0: PME# disabled
Is this an error/problem?
greets
thomas
Quoted 40 lines · Thomas Meyer
Hi,
With 2.6.30-rc4 I see this after resume from ram or disk. Here log from resume from disk:
[ 6643.757890] Breaking affinity for irq 23 [ 6643.759029] kvm: disabling virtualization on CPU1 [ 6643.859360] CPU 1 is now offline [ 6643.859366] SMP alternatives: switching to UP code [ 6643.869609] CPU1 is down [ 6643.869682] Extended CMOS year: 2000 [ 6643.869786] PM: Creating hibernation image: [ 6643.872676] PM: Need to copy 124075 pages [ 6643.872676] Intel machine check architecture supported. [ 6643.872676] Intel machine check reporting enabled on CPU#0. [ 6643.872676] PM: Restoring platform NVS memory [ 6643.872676] Extended CMOS year: 2000 [ 6643.872676] Enabling non-boot CPUs ... [ 6643.872676] SMP alternatives: switching to SMP code [ 6643.879652] CPU 1 irqstacks, hard=c20d6000 soft=c20d7000 [ 6643.879661] Booting processor 1 APIC 0x1 ip 0x6000 [ 6643.869076] Initializing CPU#1 [ 6643.869076] Calibrating delay using timer specific routine.. 3663.43 BogoMIPS (lpj=6103090) [ 6643.869076] CPU: L1 I cache: 32K, L1 D cache: 32K [ 6643.869076] CPU: L2 cache: 2048K [ 6643.869076] CPU: Physical Processor ID: 0 [ 6643.869076] CPU: Processor Core ID: 1 [ 6643.869076] Intel machine check architecture supported. [ 6643.869076] Intel machine check reporting enabled on CPU#1. [ 6643.973311] CPU1: Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08 [ 6643.973364] kvm: enabling virtualization on CPU1 [ 6643.973521] Switched to high resolution mode on CPU 1 [ 6643.982900] microcode: failed to init CPU1 [ 6643.983528] CPU1 is up [ 6643.984529] ACPI: Waking up from system sleep state S4 [ 6644.290917] pci 0000:00:1e.0: power state changed by ACPI to D0 [ 6644.291103] ata_piix 0000:00:1f.1: power state changed by ACPI to D0 [ 6644.291139] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800001, writing 0x2800005) [ 6644.291187] ata_piix 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00003, writing 0x2b00007) [ 6644.297593] pci 0000:00:07.0: PME# disabled
Quoted 1 line
Is this an error/problem?
Not sure.
CCing the people who have worked with the Intel microcode code recently.
Thanks,
Rafael