Skip to contentSkip to conversation

AverMedia AVerTV Volar Black HD (A850) support

DISCUSSION [email protected] 1 participant 1 message May 11, 2009 Media (V4L/DVB)

lore
Share & tools
lore
#0 lore raw

Hi and thanks for your work.

I have a AverMedia AVerTV Volar Black, I downloaded latest v4l-dvb (build with 2.6.29.2 kernel), load driver, all is fine :

***************************************************************************
dvb-usb: found a 'AverMedia AVerTV Volar Black HD (A850)' in cold state, will
try to load a firmware
usb 1-4: firmware: requesting dvb-usb-af9015.fw
dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw'
dvb-usb: found a 'AverMedia AVerTV Volar Black HD (A850)' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (AverMedia AVerTV Volar Black HD (A850))
af9013: firmware version:4.95.0
DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T)...
MXL5005S: Attached at address 0xc6
dvb-usb: AverMedia AVerTV Volar Black HD (A850) successfully initialized and
connected.
usbcore: registered new interface driver dvb_usb_af9015

***************************************************************************
but after starting dvbscan (that starts but never stops), I see those error messages :

[60111.937222] af9015: command failed:1
[60111.937226] mxl5005s I2C reset failed

(dvbscan reports tuning status is 0x02, then 0x02, 0x01 and 0x1f

What can I do now ?

Yann.