Skip to contentSkip to conversation

cx18: Testers needed: VBI for non-NTSC-M input signals

DISCUSSION Andy Walls 2 participants 2 messages May 17, 2009 Media (V4L/DVB)

lore
Share & tools
lore

Andy Walls

author
#0 lore raw

Hi,

Thanks to a loaner PVR-350 from Hans, I've been able to implement VBI support in the cx18 driver for non-NTSC video standards.

If you've got a 625 line PAL, SECAM, etc, video source and can test VBI functions on a CX23418 based card, I'd like to hear how it works. The patches for testing are here:

http://linuxtv.org/hg/~awalls/cx18-av-core
http://linuxtv.org/hg/~awalls/cx18-av-core/archive/tip.tar.bz2

I've only been able to test with PAL with VPS in field 1 line 16 and WSS in field 1 line 23. I wasn't able to figure out how to get Teletext B out of the PVR-350, so I'd certainly like to hear if Teletext is working.

Note: to implement Raw VBI for 625 line/50 Hz systems to extract line 23 (WSS), I had to blank one extra line in each field. This means that 625/50 systems will be missing 1 line from the top of each field (e.g. line 24 won't show). I thought that was better than having the fields move up or down around if the user turned VBI on or off.

Regards,
Andy

#1 lore raw
Quoted 9 lines · On Sunday 17 May 2009 04:06:04 Andy Walls wrote:

Hi,

Thanks to a loaner PVR-350 from Hans, I've been able to implement VBI support in the cx18 driver for non-NTSC video standards.

If you've got a 625 line PAL, SECAM, etc, video source and can test VBI functions on a CX23418 based card, I'd like to hear how it works. The patches for testing are here:

Quoted 7 lines

http://linuxtv.org/hg/~awalls/cx18-av-core
http://linuxtv.org/hg/~awalls/cx18-av-core/archive/tip.tar.bz2

I've only been able to test with PAL with VPS in field 1 line 16 and WSS in field 1 line 23. I wasn't able to figure out how to get Teletext B out of the PVR-350, so I'd certainly like to hear if Teletext is working.

You can't get teletext out of the PVR-350. Only WSS and VPS. It's a hardware limitation.

I don't have access to my HVR1600 this week, I'll see if I can test it next Sunday.

Regards,

Hans

Quoted 8 lines

Note: to implement Raw VBI for 625 line/50 Hz systems to extract line 23 (WSS), I had to blank one extra line in each field. This means that 625/50 systems will be missing 1 line from the top of each field (e.g. line 24 won't show). I thought that was better than having the fields move up or down around if the user turned VBI on or off.

Regards,
Andy

Signature · 1 line
Hans Verkuil - video4linux developer - sponsored by TANDBERG