block: fix fallouts from recent cleanups, take#2
Subsystems (6)
PATCH 1/1 block: fix fallouts from recent cleanups, take#2
Hello,
This is the second take of fix-fallouts patchset. The first one[L] was posted without header message. Changes from the last take are
* ub change updated per Pete Zitcev's comment
* resid_len init bug spotted by Boaz Harrosh fixed
This patchset contains the following three patches.
0001-ub-use-__blk_end_request_all.patch 0002-block-set-rq-resid_len-to-blk_rq_bytes-on-issue.patch 0003-bio-always-copy-back-data-for-copied-kernel-request.patch
0001 updates ub to use __blk_end_request_all() and 0002 restores the original residue count behavior. 0003 makes sure kernel pc buffer is bounced back even on request failure as user pc ones do. This inconsistency was discovered during discussion over residue count semantics.
This patchset contains the following changes.
block/blk-core.c | 5 +++-- drivers/block/ub.c | 30 +++++++++++------------------- drivers/ide/ide-cd.c | 4 ++-- drivers/ide/ide-tape.c | 2 +- drivers/message/fusion/mptsas.c | 3 ++- drivers/scsi/libsas/sas_expander.c | 4 ++++ drivers/scsi/libsas/sas_host_smp.c | 3 --- drivers/scsi/mpt2sas/mpt2sas_transport.c | 4 ++-- fs/bio.c | 2 +- 9 files changed, 26 insertions(+), 31 deletions(-)
Thanks.
--
tejun
PATCH 1/3 ub: use __blk_end_request_all()
ub_end_rq() always tries to complete full request. The @cmd_len parameter was there because rq->data_len used to be overwritten with residue count. Drop @cmd_len and use __blk_end_request_all().
--- drivers/block/ub.c | 24 +++++++----------------- 1 files changed, 7 insertions(+), 17 deletions(-)
drivers/block/ub.c +7 -17
@@ -360,8 +360,7 @@ static void ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun,static void ub_cmd_build_packet (struct ub_dev *sc,struct ub_lun *lun,struct ub_scsi_cmd *cmd,struct ub_request *urq);static void ub_rw_cmd_done (struct ub_dev *sc,struct ub_scsi_cmd *cmd); -static void ub_end_rq (struct request *rq,unsigned int status, -unsigned int cmd_len); +static void ub_end_rq (struct request *rq,unsigned int status);static int ub_rw_cmd_retry (struct ub_dev *sc,struct ub_lun *lun,struct ub_request *urq,struct ub_scsi_cmd *cmd);static int ub_submit_scsi (struct ub_dev *sc,struct ub_scsi_cmd *cmd);
@@ -644,13 +643,13 @@ static int ub_request_fn_1(struct ub_lun *lun, struct request *rq)if (atomic_read (&sc->poison)) {blk_start_request (rq); -ub_end_rq (rq,DID_NO_CONNECT <<16 ,blk_rq_bytes (rq)); +ub_end_rq (rq,DID_NO_CONNECT <<16 );return 0 ; }if (lun->changed && !blk_pc_request (rq)) {blk_start_request (rq); -ub_end_rq (rq,SAM_STAT_CHECK_CONDITION ,blk_rq_bytes (rq)); +ub_end_rq (rq,SAM_STAT_CHECK_CONDITION );return 0 ; }
@@ -702,7 +701,7 @@ static int ub_request_fn_1(struct ub_lun *lun, struct request *rq) drop:ub_put_cmd (lun, cmd); -ub_end_rq (rq,DID_ERROR <<16 ,blk_rq_bytes (rq)); +ub_end_rq (rq,DID_ERROR <<16 );return 0 ; }
@@ -777,7 +776,6 @@ static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd)struct ub_request *urq = cmd->back;struct request *rq;unsigned int scsi_status; -unsigned int cmd_len; rq = urq->rq;
@@ -816,17 +814,14 @@ static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd) urq->rq =NULL ; - cmd_len = cmd->len;ub_put_cmd (lun, cmd); -ub_end_rq (rq, scsi_status, cmd_len); +ub_end_rq (rq, scsi_status);blk_start_queue (lun->disk->queue); } -static void ub_end_rq (struct request *rq,unsigned int scsi_status, -unsigned int cmd_len) +static void ub_end_rq (struct request *rq,unsigned int scsi_status) {int error; -long rqlen;if (scsi_status ==0 ) { error =0 ;
@@ -834,12 +829,7 @@ static void ub_end_rq(struct request *rq, unsigned int scsi_status, error = -EIO ; rq->errors = scsi_status; } - rqlen =blk_rq_bytes (rq);/* Oddly enough, this is the residue. */ -if (__blk_end_request (rq, error, cmd_len)) { - printk(KERN_WARNING DRV_NAME -": __blk_end_request blew, %s-cmd total %u rqlen %ld\n" , - blk_pc_request(rq)? "pc": "fs", cmd_len, rqlen); - } +__blk_end_request_all (rq, error); } static int ub_rw_cmd_retry(struct ub_dev *sc, struct ub_lun *lun,
Signature · 1 line
1.6.0.2
PATCH 2/3 block: set rq->resid_len to blk_rq_bytes() on issue
In reply to Tejun HeoIn commit c3a4d78c580de4edc9ef0f7c59812fb02ceb037f, while introducing rq->resid_len, the default value of residue count was changed from full count to zero. The conversion was done under the assumption that when a request fails residue count wasn't defined. However, Boaz and James pointed out that this wasn't true and the residue count should be preserved for failed requests too.
This patchset restores the original behavior by setting rq->resid_len to blk_rq_bytes(rq) on request start and restoring explicit clearing in affected drivers. While at it, take advantage of the fact that rq->resid_len is set to full count where applicable.
* ide-cd: rq->resid_len cleared on pc success
* mptsas: req->resid_len cleared on success
* sas_expander: rsp/req->resid_len cleared on success
* mpt2sas_transport: req->resid_len cleared on success
* ide-cd, ide-tape, mptsas, sas_host_smp, mpt2sas_transport, ub: take advantage of initial full count to simplify code
Boaz Harrosh spotted bug in resid_len initialization. Fixed as suggested.
--- block/blk-core.c | 5 +++-- drivers/block/ub.c | 6 ++++-- drivers/ide/ide-cd.c | 4 ++-- drivers/ide/ide-tape.c | 2 +- drivers/message/fusion/mptsas.c | 3 ++- drivers/scsi/libsas/sas_expander.c | 4 ++++ drivers/scsi/libsas/sas_host_smp.c | 3 --- drivers/scsi/mpt2sas/mpt2sas_transport.c | 4 ++-- 8 files changed, 18 insertions(+), 13 deletions(-)
block/blk-core.c +3 -2
@@ -1783,9 +1783,10 @@ void blk_start_request(struct request *req)blk_dequeue_request (req);/* -* We are now handing the request to the hardware, add the -* timeout handler. +* We are now handing the request to the hardware, initialize +* resid_len to full count and add the timeout handler. */ + req->resid_len =blk_rq_bytes (req);blk_add_timer (req); }EXPORT_SYMBOL (blk_start_request);
drivers/block/ub.c +4 -2
@@ -781,8 +781,10 @@ static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd)if (cmd->error ==0 ) {if (blk_pc_request (rq)) { -if (cmd->act_len <blk_rq_bytes (rq)) - rq->resid_len =blk_rq_bytes (rq) - cmd->act_len; +if (cmd->act_len >= rq->resid_len) + rq->resid_len =0 ; +else + rq->resid_len -= cmd->act_len; scsi_status =0 ; }else {if (cmd->act_len != cmd->len) {
drivers/ide/ide-cd.c +2 -2
@@ -699,6 +699,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) out_end:if (blk_pc_request (rq) && rc ==0 ) { + rq->resid_len =0 ;blk_end_request_all (rq,0 ); hwif->rq =NULL ; }else {
@@ -718,8 +719,7 @@ out_end:/* make sure it's fully ended */ if (blk_fs_request (rq) ==0 ) { - rq->resid_len =blk_rq_bytes (rq) - - (cmd->nbytes - cmd->nleft); + rq->resid_len -= cmd->nbytes - cmd->nleft;if (uptodate ==0 && (cmd->tf_flags &IDE_TFLAG_WRITE )) rq->resid_len += cmd->last_xfer_len; }
drivers/ide/ide-tape.c +1 -1
@@ -380,7 +380,7 @@ static int ide_tape_callback(ide_drive_t *drive, int dsc) } tape->first_frame += blocks; - rq->resid_len =blk_rq_bytes (rq) - blocks * tape->blk_size; + rq->resid_len -= blocks * tape->blk_size;if (pc->error) { uptodate =0 ;
drivers/message/fusion/mptsas.c +2 -1
@@ -1357,7 +1357,8 @@ static int mptsas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy, smprep = (SmpPassthroughReply_t *)ioc->sas_mgmt.reply;memcpy (req->sense, smprep,sizeof (*smprep)); req->sense_len =sizeof (*smprep); - rsp->resid_len =blk_rq_bytes (rsp) - smprep->ResponseDataLength; + req->resid_len =0 ; + rsp->resid_len -= smprep->ResponseDataLength; }else {printk (MYIOC_s_ERR_FMT"%s: smp passthru reply failed to be returned\n" , ioc->name, __func__);
drivers/scsi/libsas/sas_expander.c +4 -0
@@ -1937,7 +1937,11 @@ int sas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,if (ret >0 ) {/* positive number is the untransferred residual */ rsp->resid_len = ret; + req->resid_len =0 ; ret =0 ; + }else if (ret ==0 ) { + rsp->resid_len =0 ; + req->resid_len =0 ; }return ret;
drivers/scsi/libsas/sas_host_smp.c +0 -3
@@ -176,9 +176,6 @@ int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req, resp_data[1 ] = req_data[1 ]; resp_data[2 ] =SMP_RESP_FUNC_UNK ; - req->resid_len =blk_rq_bytes (req); - rsp->resid_len =blk_rq_bytes (rsp); -switch (req_data[1 ]) {case SMP_REPORT_GENERAL : req->resid_len -=8 ;
drivers/scsi/mpt2sas/mpt2sas_transport.c +2 -2
@@ -1170,8 +1170,8 @@ transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,memcpy (req->sense, mpi_reply,sizeof (*mpi_reply)); req->sense_len =sizeof (*mpi_reply); - rsp->resid_len =blk_rq_bytes (rsp) - - mpi_reply->ResponseDataLength; + req->resid_len =0 ; + rsp->resid_len -= mpi_reply->ResponseDataLength; }else {dtransportprintk (ioc,printk (MPT2SAS_DEBUG_FMT "%s - no reply\n" , ioc->name, __func__));
Signature · 1 line
1.6.0.2
PATCH 3/3 bio: always copy back data for copied kernel requests
In reply to Tejun HeoWhen a read bio_copy_kern() request fails, the content of the bounce buffer is not copied back. However, as request failure doesn't necessarily mean complete failure, the buffer state can be useful. This behavior is also inconsistent with the user map counterpart and causes the subtle difference between bounced and unbounced IO causes confusion.
This patch makes bio_copy_kern_endio() ignore @err and always copy back data on request completion.
--- fs/bio.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
fs/bio.c +1 -1
@@ -1198,7 +1198,7 @@ static void bio_copy_kern_endio(struct bio *bio, int err)char *addr =page_address (bvec->bv_page);int len = bmd->iovecs[i].bv_len; -if (read && !err) +if (read)memcpy (p, addr, len);__free_page (bvec->bv_page);
Signature · 1 line
1.6.0.2
Jens Axboe
AppliedQuoted 15 lines · Tejun Heo
Hello,
This is the second take of fix-fallouts patchset. The first one[L] was posted without header message. Changes from the last take are
* ub change updated per Pete Zitcev's comment
*
resid_leninit bug spotted by Boaz Harrosh fixedThis patchset contains the following three patches.
0001-ub-use-__blk_end_request_all.patch 0002-block-set-rq-resid_len-to-blk_rq_bytes-on-issue.patch 0003-bio-always-copy-back-data-for-copied-kernel-request.patch
Quoted 7 lines
0001 updates ub to use
__blk_end_request_all()and 0002 restores the original residue count behavior. 0003 makes sure kernel pc buffer is bounced back even on request failure as user pc ones do. This inconsistency was discovered during discussion over residue count semantics.This patchset contains the following changes.
Applied!
Quoted 18 lines
block/blk-core.c | 5 +++-- drivers/block/ub.c | 30 +++++++++++------------------- drivers/ide/ide-cd.c | 4 ++-- drivers/ide/ide-tape.c | 2 +- drivers/message/fusion/mptsas.c | 3 ++- drivers/scsi/libsas/sas_expander.c | 4 ++++ drivers/scsi/libsas/sas_host_smp.c | 3 --- drivers/scsi/mpt2sas/mpt2sas_transport.c | 4 ++-- fs/bio.c | 2 +- 9 files changed, 26 insertions(+), 31 deletions(-)Thanks.
--
tejun
Signature · 1 line
Jens Axboe