Skip to contentSkip to conversation

AMCC 460EX Video on PCIe

U-Boot Henry Bausley 1 participant 1 message May 19, 2009

lore
Share & tools
lore
#0 lore raw

Has anyone every made a PCIe video card work with the AMCC 460EX. I am not sure
how to set VIDEO_IO_OFFSET. I have an ATI FireMV 2250 PCIe x1 video card I am
trying to get it working with the AMCC 460EX processor. I have u-boot v2009.03. I
tried following what the sequoia does for a PCI video card

I changed the

board/amcc/canyonlands/config.mk so that TEXT_BASE is 0xFFF80000
instead of 0xFFFA0000

I then added

#ifdef CONFIG_VIDEO
#define CONFIG_BIOSEMU /* x86 bios emulator for vga bios */
#define CONFIG_ATI_RADEON_FB /* use radeon framebuffer driver */
#define VIDEO_IO_OFFSET 0xe8000000 // <------------- Not sure what
this should be
#define CONFIG_SYS_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET
#define CONFIG_VIDEO_SW_CURSOR
#define CONFIG_VIDEO_LOGO
#define CONFIG_CFB_CONSOLE
#define CONFIG_SPLASH_SCREEN
#define CONFIG_VGA_AS_SINGLE_DEVICE
#define CONFIG_CMD_BMP
#endif

And I can see the libatibiosemu.a is linked in. However, I cannot see anything on a monitor.

**********************************************************
Outbound scan for Spam or Virus by Barracuda@Delta Tau
**********************************************************