lpfc 8.3.2 : Reorganization for SLI4 - Part 2 of 3
Subsystems (2)
PATCH 2/17 lpfc 8.3.2 : Reorganization for SLI4 - Part 2 of 3
Reorganization for SLI4 - Part 2 of 3
Preps the organization of the driver so that the bottom half, which interacts with the hardware, can share common code sequences for attachment, detachment, initialization, teardown, etc with new hardware.
For very common code sections, which become specific to the interface type, the driver uses an indirect function call. The function is set at initialization. For less common sections, such as initialization, the driver looks at the interface type and calls the routines relative to the interface.
Signed-off-by James Smart <[email protected]>
---
lpfc_scsi.c | 435 +++++++++++++++++-------- lpfc_sli.c | 1008 ++++++++++++++++++++++++++++++++++++++---------------------- 2 files changed, 932 insertions(+), 511 deletions(-)
drivers/scsi/lpfc/lpfc_scsi.c +293 -142
@@ -438,22 +438,23 @@ lpfc_scsi_dev_block(struct lpfc_hba *phb }/** -* lpfc_new_scsi_buf - Scsi buffer allocator +* lpfc_new_scsi_buf_s3 - Scsi buffer allocator for HBA with SLI3 IF spec * @vport: The virtual port for which this call being executed. +* @num_to_allocate: The requested number of buffers to allocate. * -* This routine allocates a scsi buffer, which contains all the necessary -* information needed to initiate a SCSI I/O. The non-DMAable buffer region -* contains information to build the IOCB. The DMAable region contains -* memory for the FCP CMND, FCP RSP, and the initial BPL. In addition to -* allocating memory, the FCP CMND and FCP RSP BDEs are setup in the BPL -* and the BPL BDE is setup in the IOCB. +* This routine allocates a scsi buffer for device with SLI-3 interface spec, +* the scsi buffer contains all the necessary information needed to initiate +* a SCSI I/O. The non-DMAable buffer region contains information to build +* the IOCB. The DMAable region contains memory for the FCP CMND, FCP RSP, +* and the initial BPL. In addition to allocating memory, the FCP CMND and +* FCP RSP BDEs are setup in the BPL and the BPL BDE is setup in the IOCB. * * Return codes: -* NULL - Error -* Pointer to lpfc_scsi_buf data structure - Success +* int - number of scsi buffers that were allocated. +* 0 = failure, less than num_to_alloc is a partial failure. **/ -static struct lpfc_scsi_buf * -lpfc_new_scsi_buf (struct lpfc_vport *vport) +static int +lpfc_new_scsi_buf_s3 (struct lpfc_vport *vport,int num_to_alloc) {struct lpfc_hba *phba = vport->phba;struct lpfc_scsi_buf *psb;
@@ -463,107 +464,134 @@ lpfc_new_scsi_buf(struct lpfc_vport *vpodma_addr_t pdma_phys_fcp_rsp;dma_addr_t pdma_phys_bpl;uint16_t iotag; +int bcnt; + +for (bcnt =0 ; bcnt < num_to_alloc; bcnt++) { + psb =kzalloc (sizeof (struct lpfc_scsi_buf ),GFP_KERNEL ); +if (!psb) +break ; + +/* +* Get memory from the pci pool to map the virt space to pci +* bus space for an I/O. The DMA buffer includes space for the +* struct fcp_cmnd, struct fcp_rsp and the number of bde's +* necessary to support the sg_tablesize. +*/ + psb->data =pci_pool_alloc (phba->lpfc_scsi_dma_buf_pool, +GFP_KERNEL , &psb->dma_handle); +if (!psb->data) { +kfree (psb); +break ; + } + +/* Initialize virtual ptrs to dma_buf region. */ +memset (psb->data,0 , phba->cfg_sg_dma_buf_size); + +/* Allocate iotag for psb->cur_iocbq. */ + iotag =lpfc_sli_next_iotag (phba, &psb->cur_iocbq); +if (iotag ==0 ) { +pci_pool_free (phba->lpfc_scsi_dma_buf_pool, + psb->data, psb->dma_handle); +kfree (psb); +break ; + } + psb->cur_iocbq.iocb_flag |=LPFC_IO_FCP ; - psb =kzalloc (sizeof (struct lpfc_scsi_buf ),GFP_KERNEL ); -if (!psb) -return NULL ; - -/* -* Get memory from the pci pool to map the virt space to pci bus space -* for an I/O. The DMA buffer includes space for the struct fcp_cmnd, -* struct fcp_rsp and the number of bde's necessary to support the -* sg_tablesize. -*/ - psb->data =pci_pool_alloc (phba->lpfc_scsi_dma_buf_pool,GFP_KERNEL , - &psb->dma_handle); -if (!psb->data) { -kfree (psb); -return NULL ; - } - -/* Initialize virtual ptrs to dma_buf region. */ -memset (psb->data,0 , phba->cfg_sg_dma_buf_size); - -/* Allocate iotag for psb->cur_iocbq. */ - iotag =lpfc_sli_next_iotag (phba, &psb->cur_iocbq); -if (iotag ==0 ) { -pci_pool_free (phba->lpfc_scsi_dma_buf_pool, - psb->data, psb->dma_handle); -kfree (psb); -return NULL ; - } - psb->cur_iocbq.iocb_flag |=LPFC_IO_FCP ; - - psb->fcp_cmnd = psb->data; - psb->fcp_rsp = psb->data +sizeof (struct fcp_cmnd ); - psb->fcp_bpl = psb->data +sizeof (struct fcp_cmnd ) + -sizeof (struct fcp_rsp ); - -/* Initialize local short-hand pointers. */ - bpl = psb->fcp_bpl; - pdma_phys_fcp_cmd = psb->dma_handle; - pdma_phys_fcp_rsp = psb->dma_handle +sizeof (struct fcp_cmnd ); - pdma_phys_bpl = psb->dma_handle +sizeof (struct fcp_cmnd ) + + psb->fcp_cmnd = psb->data; + psb->fcp_rsp = psb->data +sizeof (struct fcp_cmnd ); + psb->fcp_bpl = psb->data +sizeof (struct fcp_cmnd ) +sizeof (struct fcp_rsp ); -/* -* The first two bdes are the FCP_CMD and FCP_RSP. The balance are sg -* list bdes. Initialize the first two and leave the rest for -* queuecommand. -*/ - bpl[0 ].addrHigh =le32_to_cpu (putPaddrHigh (pdma_phys_fcp_cmd)); - bpl[0 ].addrLow =le32_to_cpu (putPaddrLow (pdma_phys_fcp_cmd)); - bpl[0 ].tus.f.bdeSize =sizeof (struct fcp_cmnd ); - bpl[0 ].tus.f.bdeFlags =BUFF_TYPE_BDE_64 ; - bpl[0 ].tus.w =le32_to_cpu (bpl[0 ].tus.w); - -/* Setup the physical region for the FCP RSP */ - bpl[1 ].addrHigh =le32_to_cpu (putPaddrHigh (pdma_phys_fcp_rsp)); - bpl[1 ].addrLow =le32_to_cpu (putPaddrLow (pdma_phys_fcp_rsp)); - bpl[1 ].tus.f.bdeSize =sizeof (struct fcp_rsp ); - bpl[1 ].tus.f.bdeFlags =BUFF_TYPE_BDE_64 ; - bpl[1 ].tus.w =le32_to_cpu (bpl[1 ].tus.w); - -/* -* Since the IOCB for the FCP I/O is built into this lpfc_scsi_buf, -* initialize it with all known data now. -*/ - iocb = &psb->cur_iocbq.iocb; - iocb->un.fcpi64.bdl.ulpIoTag32 =0 ; -if ((phba->sli_rev ==3 ) && - !(phba->sli3_options &LPFC_SLI3_BG_ENABLED )) { -/* fill in immediate fcp command BDE */ - iocb->un.fcpi64.bdl.bdeFlags =BUFF_TYPE_BDE_IMMED ; - iocb->un.fcpi64.bdl.bdeSize =sizeof (struct fcp_cmnd ); - iocb->un.fcpi64.bdl.addrLow = offsetof(IOCB_t , - unsli3.fcp_ext.icd); - iocb->un.fcpi64.bdl.addrHigh =0 ; - iocb->ulpBdeCount =0 ; - iocb->ulpLe =0 ; -/* fill in responce BDE */ - iocb->unsli3.fcp_ext.rbde.tus.f.bdeFlags =BUFF_TYPE_BDE_64 ; - iocb->unsli3.fcp_ext.rbde.tus.f.bdeSize = -sizeof (struct fcp_rsp ); - iocb->unsli3.fcp_ext.rbde.addrLow = -putPaddrLow (pdma_phys_fcp_rsp); - iocb->unsli3.fcp_ext.rbde.addrHigh = -putPaddrHigh (pdma_phys_fcp_rsp); - }else { - iocb->un.fcpi64.bdl.bdeFlags =BUFF_TYPE_BLP_64 ; - iocb->un.fcpi64.bdl.bdeSize = (2 *sizeof (struct ulp_bde64 )); - iocb->un.fcpi64.bdl.addrLow =putPaddrLow (pdma_phys_bpl); - iocb->un.fcpi64.bdl.addrHigh =putPaddrHigh (pdma_phys_bpl); - iocb->ulpBdeCount =1 ; - iocb->ulpLe =1 ; +/* Initialize local short-hand pointers. */ + bpl = psb->fcp_bpl; + pdma_phys_fcp_cmd = psb->dma_handle; + pdma_phys_fcp_rsp = psb->dma_handle +sizeof (struct fcp_cmnd ); + pdma_phys_bpl = psb->dma_handle +sizeof (struct fcp_cmnd ) + +sizeof (struct fcp_rsp ); + +/* +* The first two bdes are the FCP_CMD and FCP_RSP. The balance +* are sg list bdes. Initialize the first two and leave the +* rest for queuecommand. +*/ + bpl[0 ].addrHigh =le32_to_cpu (putPaddrHigh (pdma_phys_fcp_cmd)); + bpl[0 ].addrLow =le32_to_cpu (putPaddrLow (pdma_phys_fcp_cmd)); + bpl[0 ].tus.f.bdeSize =sizeof (struct fcp_cmnd ); + bpl[0 ].tus.f.bdeFlags =BUFF_TYPE_BDE_64 ; + bpl[0 ].tus.w =le32_to_cpu (bpl[0 ].tus.w); + +/* Setup the physical region for the FCP RSP */ + bpl[1 ].addrHigh =le32_to_cpu (putPaddrHigh (pdma_phys_fcp_rsp)); + bpl[1 ].addrLow =le32_to_cpu (putPaddrLow (pdma_phys_fcp_rsp)); + bpl[1 ].tus.f.bdeSize =sizeof (struct fcp_rsp ); + bpl[1 ].tus.f.bdeFlags =BUFF_TYPE_BDE_64 ; + bpl[1 ].tus.w =le32_to_cpu (bpl[1 ].tus.w); + +/* +* Since the IOCB for the FCP I/O is built into this +* lpfc_scsi_buf, initialize it with all known data now. +*/ + iocb = &psb->cur_iocbq.iocb; + iocb->un.fcpi64.bdl.ulpIoTag32 =0 ; +if ((phba->sli_rev ==3 ) && + !(phba->sli3_options &LPFC_SLI3_BG_ENABLED )) { +/* fill in immediate fcp command BDE */ + iocb->un.fcpi64.bdl.bdeFlags =BUFF_TYPE_BDE_IMMED ; + iocb->un.fcpi64.bdl.bdeSize =sizeof (struct fcp_cmnd ); + iocb->un.fcpi64.bdl.addrLow = offsetof(IOCB_t , + unsli3.fcp_ext.icd); + iocb->un.fcpi64.bdl.addrHigh =0 ; + iocb->ulpBdeCount =0 ; + iocb->ulpLe =0 ; +/* fill in responce BDE */ + iocb->unsli3.fcp_ext.rbde.tus.f.bdeFlags = +BUFF_TYPE_BDE_64 ; + iocb->unsli3.fcp_ext.rbde.tus.f.bdeSize = +sizeof (struct fcp_rsp ); + iocb->unsli3.fcp_ext.rbde.addrLow = +putPaddrLow (pdma_phys_fcp_rsp); + iocb->unsli3.fcp_ext.rbde.addrHigh = +putPaddrHigh (pdma_phys_fcp_rsp); + }else { + iocb->un.fcpi64.bdl.bdeFlags =BUFF_TYPE_BLP_64 ; + iocb->un.fcpi64.bdl.bdeSize = + (2 *sizeof (struct ulp_bde64 )); + iocb->un.fcpi64.bdl.addrLow = +putPaddrLow (pdma_phys_bpl); + iocb->un.fcpi64.bdl.addrHigh = +putPaddrHigh (pdma_phys_bpl); + iocb->ulpBdeCount =1 ; + iocb->ulpLe =1 ; + } + iocb->ulpClass =CLASS3 ; + psb->status =IOSTAT_SUCCESS ; + } - iocb->ulpClass =CLASS3 ; -return psb; +return bcnt; }/** -* lpfc_get_scsi_buf - Get a scsi buffer from lpfc_scsi_buf_list list of Hba -* @phba: The Hba for which this call is being executed. +* lpfc_new_scsi_buf - Wrapper funciton for scsi buffer allocator +* @vport: The virtual port for which this call being executed. +* @num_to_allocate: The requested number of buffers to allocate. +* +* This routine wraps the actual SCSI buffer allocator function pointer from +* the lpfc_hba struct. +* +* Return codes: +* int - number of scsi buffers that were allocated. +* 0 = failure, less than num_to_alloc is a partial failure. +**/ +static inline int +lpfc_new_scsi_buf (struct lpfc_vport *vport,int num_to_alloc) +{ +return vport->phba->lpfc_new_scsi_buf (vport, num_to_alloc); +} + +/** +* lpfc_get_scsi_buf - Get a scsi buffer from lpfc_scsi_buf_list of the HBA +* @phba: The HBA for which this call is being executed. * * This routine removes a scsi buffer from head of @phba lpfc_scsi_buf_list list * and returns to caller.
@@ -591,7 +619,7 @@ lpfc_get_scsi_buf(struct lpfc_hba * phba }/** -* lpfc_release_scsi_buf - Return a scsi buffer back to hba's lpfc_scsi_buf_list +* lpfc_release_scsi_buf - Return a scsi buffer back to hba scsi buf list * @phba: The Hba for which this call is being executed. * @psb: The scsi buffer which is being released. *
@@ -599,7 +627,7 @@ lpfc_get_scsi_buf(struct lpfc_hba * phba* lpfc_scsi_buf_list list. **/ static void -lpfc_release_scsi_buf (struct lpfc_hba *phba,struct lpfc_scsi_buf *psb) +lpfc_release_scsi_buf_s3 (struct lpfc_hba *phba,struct lpfc_scsi_buf *psb) {unsigned long iflag =0 ;
@@ -610,21 +638,36 @@ lpfc_release_scsi_buf(struct lpfc_hba *p }/** -* lpfc_scsi_prep_dma_buf - Routine to do DMA mapping for scsi buffer +* lpfc_release_scsi_buf: Return a scsi buffer back to hba scsi buf list. +* @phba: The Hba for which this call is being executed. +* @psb: The scsi buffer which is being released. +* +* This routine releases @psb scsi buffer by adding it to tail of @phba +* lpfc_scsi_buf_list list. +**/ +static void +lpfc_release_scsi_buf (struct lpfc_hba *phba,struct lpfc_scsi_buf *psb) +{ + + phba->lpfc_release_scsi_buf (phba, psb); +} + +/** +* lpfc_scsi_prep_dma_buf_s3 - DMA mapping for scsi buffer to SLI3 IF spec * @phba: The Hba for which this call is being executed. * @lpfc_cmd: The scsi buffer which is going to be mapped. * * This routine does the pci dma mapping for scatter-gather list of scsi cmnd -* field of @lpfc_cmd. This routine scans through sg elements and format the -* bdea. This routine also initializes all IOCB fields which are dependent on -* scsi command request buffer. +* field of @lpfc_cmd for device with SLI-3 interface spec. This routine scans +* through sg elements and format the bdea. This routine also initializes all +* IOCB fields which are dependent on scsi command request buffer. * * Return codes: * 1 - Error * 0 - Success **/ static int -lpfc_scsi_prep_dma_buf (struct lpfc_hba *phba,struct lpfc_scsi_buf *lpfc_cmd) +lpfc_scsi_prep_dma_buf_s3 (struct lpfc_hba *phba,struct lpfc_scsi_buf *lpfc_cmd) {struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd;struct scatterlist *sgel =NULL ;
@@ -1412,6 +1455,24 @@ out: }/** +* lpfc_scsi_prep_dma_buf - Wrapper function for DMA mapping of scsi buffer +* @phba: The Hba for which this call is being executed. +* @lpfc_cmd: The scsi buffer which is going to be mapped. +* +* This routine wraps the actual DMA mapping function pointer from the +* lpfc_hba struct. +* +* Return codes: +* 1 - Error +* 0 - Success +**/ +static inline int +lpfc_scsi_prep_dma_buf (struct lpfc_hba *phba,struct lpfc_scsi_buf *lpfc_cmd) +{ +return phba->lpfc_scsi_prep_dma_buf (phba, lpfc_cmd); +} + +/** * lpfc_send_scsi_error_event - Posts an event when there is SCSI error * @phba: Pointer to hba context object. * @vport: Pointer to vport object.
@@ -1504,15 +1565,15 @@ lpfc_send_scsi_error_event(struct lpfc_h }/** -* lpfc_scsi_unprep_dma_buf - Routine to un-map DMA mapping of scatter gather -* @phba: The Hba for which this call is being executed. +* lpfc_scsi_unprep_dma_buf_s3 - Un-map DMA mapping of SG-list for SLI3 dev +* @phba: The HBA for which this call is being executed. * @psb: The scsi buffer which is going to be un-mapped. * * This routine does DMA un-mapping of scatter gather list of scsi command -* field of @lpfc_cmd. +* field of @lpfc_cmd for device with SLI-3 interface spec. **/ static void -lpfc_scsi_unprep_dma_buf (struct lpfc_hba * phba,struct lpfc_scsi_buf * psb) +lpfc_scsi_unprep_dma_buf_s3 (struct lpfc_hba *phba,struct lpfc_scsi_buf *psb) {/* * There are only two special cases to consider. (1) the scsi command
@@ -1529,6 +1590,20 @@ lpfc_scsi_unprep_dma_buf(struct lpfc_hba }/** +* lpfc_scsi_unprep_dma_buf - Wrapper function for unmap DMA mapping of SG-list +* @phba: The Hba for which this call is being executed. +* @psb: The scsi buffer which is going to be un-mapped. +* +* This routine does DMA un-mapping of scatter gather list of scsi command +* field of @lpfc_cmd for device with SLI-4 interface spec. +**/ +static void +lpfc_scsi_unprep_dma_buf (struct lpfc_hba *phba,struct lpfc_scsi_buf *psb) +{ + phba->lpfc_scsi_unprep_dma_buf (phba, psb); +} + +/** * lpfc_handler_fcp_err - FCP response handler * @vport: The virtual port for which this call is being executed. * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure.
@@ -1676,7 +1751,7 @@ lpfc_handle_fcp_err(struct lpfc_vport *v* lpfc_scsi_cmd_iocb_cmpl - Scsi cmnd IOCB completion routine * @phba: The Hba for which this call is being executed. * @pIocbIn: The command IOCBQ for the scsi cmnd. -* @pIocbOut: The response IOCBQ for the scsi cmnd . +* @pIocbOut: The response IOCBQ for the scsi cmnd. * * This routine assigns scsi command result by looking into response IOCB * status field appropriately. This routine handles QUEUE FULL condition as
@@ -1957,16 +2032,16 @@ lpfc_fcpcmd_to_iocb(uint8_t *data, struc }/** -* lpfc_scsi_prep_cmnd - Routine to convert scsi cmnd to FCP information unit +* lpfc_scsi_prep_cmnd_s3 - Convert scsi cmnd to FCP infor unit for SLI3 dev * @vport: The virtual port for which this call is being executed. * @lpfc_cmd: The scsi command which needs to send. * @pnode: Pointer to lpfc_nodelist. * * This routine initializes fcp_cmnd and iocb data structure from scsi command -* to transfer. +* to transfer for device with SLI3 interface spec. **/ static void -lpfc_scsi_prep_cmnd (struct lpfc_vport *vport,struct lpfc_scsi_buf *lpfc_cmd, +lpfc_scsi_prep_cmnd_s3 (struct lpfc_vport *vport,struct lpfc_scsi_buf *lpfc_cmd,struct lpfc_nodelist *pnode) {struct lpfc_hba *phba = vport->phba;
@@ -2013,8 +2088,11 @@ lpfc_scsi_prep_cmnd(struct lpfc_vport *vif (scsi_sg_count (scsi_cmnd)) {if (datadir ==DMA_TO_DEVICE ) { iocb_cmd->ulpCommand =CMD_FCP_IWRITE64_CR ; - iocb_cmd->un.fcpi.fcpi_parm =0 ; - iocb_cmd->ulpPU =0 ; +if (phba->sli_rev <LPFC_SLI_REV4 ) { + iocb_cmd->un.fcpi.fcpi_parm =0 ; + iocb_cmd->ulpPU =0 ; + }else + iocb_cmd->ulpPU =PARM_READ_CHECK ; fcp_cmnd->fcpCntl3 =WRITE_DATA ; phba->fc4OutputRequests++; }else {
@@ -2051,20 +2129,37 @@ lpfc_scsi_prep_cmnd(struct lpfc_vport *v }/** -* lpfc_scsi_prep_task_mgmt_cmnd - Convert scsi TM cmnd to FCP information unit +* lpfc_scsi_prep_cmnd - Wrapper func for convert scsi cmnd to FCP info unit +* @vport: The virtual port for which this call is being executed. +* @lpfc_cmd: The scsi command which needs to send. +* @pnode: Pointer to lpfc_nodelist. +* +* This routine wraps the actual convert SCSI cmnd function pointer from +* the lpfc_hba struct. +**/ +static inline void +lpfc_scsi_prep_cmnd (struct lpfc_vport *vport,struct lpfc_scsi_buf *lpfc_cmd, +struct lpfc_nodelist *pnode) +{ + vport->phba->lpfc_scsi_prep_cmnd (vport, lpfc_cmd, pnode); +} + +/** +* lpfc_scsi_prep_task_mgmt_cmnd_s3 - Convert SLI3 scsi TM cmd to FCP info unit * @vport: The virtual port for which this call is being executed. * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure. * @lun: Logical unit number. * @task_mgmt_cmd: SCSI task management command. * -* This routine creates FCP information unit corresponding to @task_mgmt_cmd. +* This routine creates FCP information unit corresponding to @task_mgmt_cmd +* for device with SLI-3 interface spec. * * Return codes: * 0 - Error * 1 - Success **/ static int -lpfc_scsi_prep_task_mgmt_cmd (struct lpfc_vport *vport, +lpfc_scsi_prep_task_mgmt_cmd_s3 (struct lpfc_vport *vport,struct lpfc_scsi_buf *lpfc_cmd,unsigned int lun,uint8_t task_mgmt_cmd)
@@ -2114,6 +2209,67 @@ lpfc_scsi_prep_task_mgmt_cmd(struct lpfc }/** +* lpfc_scsi_prep_task_mgmt_cmnd - Wrapper func convert scsi TM cmd to FCP info +* @vport: The virtual port for which this call is being executed. +* @lpfc_cmd: Pointer to lpfc_scsi_buf data structure. +* @lun: Logical unit number. +* @task_mgmt_cmd: SCSI task management command. +* +* This routine wraps the actual convert SCSI TM to FCP information unit +* function pointer from the lpfc_hba struct. +* +* Return codes: +* 0 - Error +* 1 - Success +**/ +static inline int +lpfc_scsi_prep_task_mgmt_cmd (struct lpfc_vport *vport, +struct lpfc_scsi_buf *lpfc_cmd, +unsigned int lun, +uint8_t task_mgmt_cmd) +{ +struct lpfc_hba *phba = vport->phba; + +return phba->lpfc_scsi_prep_task_mgmt_cmd (vport, lpfc_cmd, lun, + task_mgmt_cmd); +} + +/** +* lpfc_scsi_api_table_setup - Set up scsi api fucntion jump table +* @phba: The hba struct for which this call is being executed. +* @dev_grp: The HBA PCI-Device group number. +* +* This routine sets up the SCSI interface API function jump table in @phba +* struct. +* Returns: 0 - success, -ENODEV - failure. +**/ +int +lpfc_scsi_api_table_setup (struct lpfc_hba *phba,uint8_t dev_grp) +{ + +switch (dev_grp) { +case LPFC_PCI_DEV_LP : + phba->lpfc_new_scsi_buf = lpfc_new_scsi_buf_s3; + phba->lpfc_scsi_prep_dma_buf = lpfc_scsi_prep_dma_buf_s3; + phba->lpfc_scsi_prep_cmnd = lpfc_scsi_prep_cmnd_s3; + phba->lpfc_scsi_unprep_dma_buf = lpfc_scsi_unprep_dma_buf_s3; + phba->lpfc_scsi_prep_task_mgmt_cmd = + lpfc_scsi_prep_task_mgmt_cmd_s3; + phba->lpfc_release_scsi_buf = lpfc_release_scsi_buf_s3; +break ; +default : +lpfc_printf_log (phba,KERN_ERR ,LOG_INIT , +"1418 Invalid HBA PCI-device group: 0x%x\n" , + dev_grp); +return -ENODEV ; +break ; + } + phba->lpfc_get_scsi_buf = lpfc_get_scsi_buf; + phba->lpfc_rampdown_queue_depth = lpfc_rampdown_queue_depth; +return 0 ; +} + +/** * lpfc_taskmgmt_def_cmpl - IOCB completion routine for task management command * @phba: The Hba for which this call is being executed. * @cmdiocbq: Pointer to lpfc_iocbq data structure.
@@ -2531,7 +2687,10 @@ lpfc_abort_handler(struct scsi_cmnd *cmn icmd = &abtsiocb->iocb; icmd->un.acxri.abortType =ABORT_TYPE_ABTS ; icmd->un.acxri.abortContextTag = cmd->ulpContext; - icmd->un.acxri.abortIoTag = cmd->ulpIoTag; +if (phba->sli_rev ==LPFC_SLI_REV4 ) + icmd->un.acxri.abortIoTag = iocb->sli4_xritag; +else + icmd->un.acxri.abortIoTag = cmd->ulpIoTag; icmd->ulpLe =1 ; icmd->ulpClass = cmd->ulpClass;
@@ -2825,11 +2984,10 @@ lpfc_slave_alloc(struct scsi_device *sde {struct lpfc_vport *vport = (struct lpfc_vport *) sdev->host->hostdata;struct lpfc_hba *phba = vport->phba; -struct lpfc_scsi_buf *scsi_buf =NULL ;struct fc_rport *rport =starget_to_rport (scsi_target (sdev)); -uint32_t total =0 , i; +uint32_t total =0 ;uint32_t num_to_alloc =0 ; -unsigned long flags; +int num_allocated =0 ;if (!rport ||fc_remote_port_chkready (rport))return -ENXIO ;
@@ -2863,20 +3021,13 @@ lpfc_slave_alloc(struct scsi_device *sde (phba->cfg_hba_queue_depth - total)); num_to_alloc = phba->cfg_hba_queue_depth - total; } - -for (i =0 ; i < num_to_alloc; i++) { - scsi_buf =lpfc_new_scsi_buf (vport); -if (!scsi_buf) { -lpfc_printf_vlog (vport,KERN_ERR ,LOG_FCP , -"0706 Failed to allocate " -"command buffer\n" ); -break ; - } - -spin_lock_irqsave (&phba->scsi_buf_list_lock, flags); - phba->total_scsi_bufs++; -list_add_tail (&scsi_buf->list, &phba->lpfc_scsi_buf_list); -spin_unlock_irqrestore (&phba->scsi_buf_list_lock, flags); + num_allocated =lpfc_new_scsi_buf (vport, num_to_alloc); +if (num_to_alloc != num_allocated) { +lpfc_printf_vlog (vport,KERN_WARNING ,LOG_FCP , +"0708 Allocation request of %d " +"command buffers did not succeed. " +"Allocated %d buffers.\n" , + num_to_alloc, num_allocated); }return 0 ; }
drivers/scsi/lpfc/lpfc_sli.c +639 -369
1,454 lines not on this page · raw message